
Votre imprimante laser HP Color LaserJet
CP6015, CP6015N, CP6015DN, CP6015XH
est en panne ?
Notre technicien peut intervenir sur site
pour la dépanner.
Nos spécialistes sont en mesure de prendre en charge toutes les pannes :
Indiquez-nous la panne rencontrée pour obtenir un diagnostic.
- Défauts d’impression (traces, points, traits...)
- Bourrages papier (départ papier, feuille froissée en accordéon...)
- Message ou code erreur
- Fuite de toner
- Bruit anormal
- Panne électronique
- Paramétrage
- Accessoire
- Pièce détachée
- Machine complète
... ou le code erreur qui s'affiche sur l'écran de votre imprimante.
Codes erreur rencontrés fréquemment sur l'imprimante
HP Color LaserJet
CP6015, CP6015N, CP6015DN, CP6015XH
Le code affiché sur votre imprimante est plus long que celui indiqué dans cette liste.
Par exemple si l'écran de l'imprimante indique un code 13.00.02, nous ne retenons que le début du code, c'est à dire 13.
Le code 13 renvoie à un type de problème, les chiffres qui suivent pouvant apporter une précision.

Code erreur 10 : Problème de mémoire consommable, puce HS
Code erreur 13 : Bourrage papier
Code erreur 41 : Format de papier inattendu
Code erreur 49 : Format de fichier incorrect (pdf ou autre) ou pb de firmware
Code erreur 50 ou Erreur Station fusion ou Remplacer kit de maintenance : Problème de four (kit de maintenance)
Code erreur 51 : Panne de moteur laser
Code erreur 57 : Panne de ventilateur
Code erreur 59 : Panne de moteur
Tableau de tous les codes erreur de la HP Color LaserJet CP6015, CP6015N, CP6015DN, CP6015XH
- code :
10.32.00
- affichage :
10.32.00 Unauthorized Supply
- description :
An unauthorized print cartridge has been installed.
- code :
10.90.XY
- affichage :
10.90.XY REPLACE <COLOR> CARTRIDGE
- description :
A toner replenishment malfunction has occurred.
- code :
10.91.00
- affichage :
10.91.00 PRINT CARTRIDGE ERROR
- description :
There is an error with the black-toner feed motor.
- code :
10.91.09
- affichage :
10.91.09 PRINT CARTRIDGE ERROR
- description :
There is an error with the color-toner feed motor.
- code :
10.XX.YY
- affichage :
10.XX.YY SUPPLY MEMORY ERROR
- description :
The product cannot read or write to at least one image drum. 10.10.00-10.10.03 = Missing e-label on print cartridge 10.10.05-10.10.08 = Missing e-label on image drum 10.00.00-10.00.03 = Defective e-label on print cartridge 10.00.05-10.00.08 = Defective e-label on image drum
- code :
11.XX
- affichage :
11.XX Internal clock error
- description :
The product real time clock has experienced an error.
- code :
13.12.11
- affichage :
13.12.11
- description :
Finisher stay jam at either PI33 or PI34 when engine powered on. When the engine is powered on, the finisher's upper-feed-path-entry sensor (PI33) or the upper-feed-path-exit sensor (PI34) is activated suggesting that there is paper in the upper paper path of the finisher at sensors PI33 or PI34.
- code :
13.12.12
- affichage :
13.12.12
- description :
Finisher delay jam at PI33. The engine signals the finisher that paper is about to enter the finisher from the IPTU. The finisher's upper-feed-path-entry sensor (PI33), which detects paper entering the finisher, does not detect the paper within the expected time period triggering the error.
- code :
13.12.13
- affichage :
13.12.13
- description :
Finisher stay jam at PI33. Finisher's upper-feed-path-entry sensor (PI33) is remaining activated longer than expected, suggesting that paper has jammed at the sensor.
- code :
13.12.14
- affichage :
13.12.14
- description :
Finisher delay jam at PI34. Upper-paper-path-entry sensor (PI33) has signaled that paper has passed but upperpaper- path exit sensor PI34 does not actuate within the expected time, suggesting that the paper has jammed between PI33 and PI34 in the upper paper path.
- code :
13.12.15
- affichage :
13.12.15
- description :
Finisher stay jam at PI34 Finisher's upper-paper-path-exit sensor (PI34) remains activated longer than expected suggesting that paper has jammed at the sensor.
- code :
13.12.16
- affichage :
13.12.16
- description :
Finisher jam: door opened during staple/ stacking operation While the machine is printing, upper-door (open/close) sensor (PI31) or front-door (open/close) sensor (PI32) or the front-door (open/close) switch (MSW31) has signaled that one of the doors has been opened, suggesting that there may now be paper found in the upper paper path.
- code :
13.12.17
- affichage :
13.12.17
- description :
Engine to finisher timing jam: unexpected arrival of paper to finisher Upper-paper-path entry sensor (PI33) has detected paper before a signal from the engine has been received, indicating that paper is being delivered from the IPTU to the finisher.
- code :
13.12.21
- affichage :
13.12.21
- description :
Finisher upper stapler (stapler 1) staple jam. When the staple motor (M41) is rotated forward, the staple home-position sensor (PI5) does not turn back on after the prescribed time has elapsed after it goes off, and the staple home-position sensor (PI50) turns on within the prescribed time after the staple motor (M41) is rotated backwards.
- code :
13.12.41
- affichage :
13.12.41
- description :
Finisher: Paper detected in the bookletmaking portion of the finisher at engine power on. Occurs when paper is detected by one of the sensors on the paper-sensor board (PI18, PI19, PI20), vertical-path-paper sensor (PI17), booklet-delivery sensor (PI11), paperpositioning- plate-paper sensor (PI8), or booklet-making paper-entry sensor (PI22) when engine is turned on.
- code :
13.12.42
- affichage :
13.12.42
- description :
Finisher delay jam at booklet-making paperentry sensor (PI22) Occurs when booklet making function is selected and after the engine signals the finisher that it is delivering paper to the finisher. The booklet-making-paper entry sensor (PI22) is not activated within the expected time period after receiving the engine's delivery signal, suggesting that a paper jam has occurred somewhere between the output accessory bridge (IPTU) and sensor PI22.
- code :
13.12.43
- affichage :
13.12.43
- description :
Finisher stay jam at booklet-making paper entry sensor (PI22) Occurs when the booklet-making paper entry sensor (PI22) remains activated longer than expected, suggesting that there is a paper jam at the sensor.
- code :
13.12.44
- affichage :
13.12.44
- description :
Finisher delay jam at booklet making first paper sensor (PI18) Occurs when the first-paper sensor (PI18) is not activated within the expected time following the activation of the bookletmaking- paper entry sensor (PI22), suggesting that there is a paper jam in the area between PI22 and PI18.
- code :
13.12.45
- affichage :
13.12.45
- description :
Finisher stay jam at booklet making first paper sensor (PI18), flapper-1 paper sensor (PI19) or flapper-2 paper sensor (PI20) Occurs when PI18, PI19 or PI20 remain activated longer than expected, suggesting that there is a paper jam in the flapper 1 and 2 area of the booklet-maker section of the finisher.
- code :
13.12.46
- affichage :
13.12.46
- description :
Finisher jam: door was opened during booklet-making operation. Occurs while the machine is booklet making and the booklet delivery door sensor (PI3) or the booklet paper path open/close sensor (PI3) detects that the door or paper path has been opened. Also occurs when the finisher's front-door sensor (PI32) has been opened with paper remaining in the processing tray of the main stapler while the finisher is not operating.
- code :
13.12.51
- affichage :
13.12.51
- description :
Finisher jam: rear booklet stapler (SW5) When the rear-staple motor (M6) is rotated forward, the staple-home-position sensor (SW5) does not turn back on after the prescribed time has elapsed after it goes off (0.4 seconds).
- code :
13.12.52
- affichage :
13.12.52
- description :
Finisher jam: front-booklet stapler (SW7) When the rear-staple motor (M7) is rotated forward, the staple home-position sensor (SW7) does not turn back on after the prescribed time has elapsed after it goes off (0.4 seconds).
- code :
13.12.61
- affichage :
13.12.61
- description :
Finisher delay jam at the booklet-delivery sensor (PI11) Occurs when the folded booklet exits the folding rollers and does not reach the bookletdelivery sensor (PI11) within the expected time.
- code :
13.12.62
- affichage :
13.12.62
- description :
Finisher stay jam at the booklet-delivery sensor (PI11) or the vertical-paper-path sensor (PI17) Occurs when the booklet-delivery sensor (PI11) remains activated longer than expected after sensing the arrival of the new booklet from the folding rollers. Also occurs when the vertical-paper-path sensor (PI17) remains activated longer than expected after the paper has already passed through the folding rollers and is now detected by the booklet-delivery sensor (PI11).
- code :
13.12.XX
- affichage :
13.12.XX JAM IN LEFT ACCESSORY
- description :
There is a paper jam in the output accessory.
- code :
13.JJ.NT
- affichage :
13.JJ.NT TRANSFER AREA JAM
- description :
A jam has occurred inside the right door in the image transfer area.
- code :
20
- affichage :
20 INSUFFICIENT MEMORY
- description :
The product received more data than can fit in the available memory. You might have tried to transfer too many macros, soft fonts, or complex graphics.
- code :
22
- affichage :
22 USB I/O BUFFER OVERFLOW
- description :
The product's USB buffer has overflowed.
- code :
40
- affichage :
40 EMBEDDED I/O BAD TRANSMISSION
- description :
A temporary printing error has occurred.
- code :
41.3
- affichage :
41.3 UNEXPECTED SIZE IN TRAY <XX>
- description :
The product detected a different paper size than expected.
- code :
41.5
- affichage :
41.5 UNEXPECTED TYPE IN TRAY <XX>
- description :
The product detected a different paper type than expected.
- code :
41.7
- affichage :
41.7 ERROR
- description :
Paper was late arriving at the registration area and almost caused a paper jam. If this error reappears, use different media.
- code :
41.X
- affichage :
41.<X> ERROR
- description :
A temporary printing error has occurred
- code :
48.01
- affichage :
48.01 TRANSFER UNIT ERROR
- description :
The transfer belt has dislocated during printing.
- code :
49.XXXX
- affichage :
49.XXXX
- description :
A critical firmware error has occurred that caused the processor on the formatter to abort operation. This type of error can be caused by invalid print commands. corrupt data, or invalid operations. In some cases, electrical noise in the cable can corrupt data during transmission to the printer. Other causes include poor-quality USB cables, poor connections, or home-grown programs. On rare occasions, the formatter is at fault, which is usually indicated by a 79 Service Error.
- code :
50.1
- affichage :
50.1 FUSER ERROR
- description :
The fuser has experienced a lowtemperature error.
- code :
50.10
- affichage :
50.10 FUSER ERROR
- description :
The fuser has experienced a lowtemperature error.
- code :
50.11
- affichage :
50.11 FUSER ERROR
- description :
The fuser has experienced a hightemperature error.
- code :
50.2
- affichage :
50.2 FUSER ERROR
- description :
The fuser has experienced a warm-up error.
- code :
50.3
- affichage :
50.3 FUSER ERROR
- description :
The fuser has experienced a hightemperature error.
- code :
50.4
- affichage :
50.4 FUSER ERROR
- description :
The fuser driver circuit has experienced an error.
- code :
50.5
- affichage :
50.5 FUSER ERROR
- description :
The fuser has experienced a type-mismatch error.
- code :
50.7
- affichage :
50.7 FUSER ERROR
- description :
The fuser has experienced a pressure release mechanism error.
- code :
50.8
- affichage :
50.8 FUSER ERROR
- description :
The fuser has experienced a lowtemperature error.
- code :
50.9
- affichage :
50.9 FUSER ERROR
- description :
The fuser has experienced a hightemperature error.
- code :
50.X
- affichage :
50.X FUSER ERROR
- description :
A fuser error has occurred.
- code :
51.20
- affichage :
51.20 ERROR
- description :
The black laser (51.20) or cyan laser (51.21) has experienced an error.
- code :
51.21
- affichage :
51.21 ERROR
- description :
The black laser (51.20) or cyan laser (51.21) has experienced an error.
- code :
51.22
- affichage :
51.22 ERROR
- description :
The magenta laser (51.22) or yellow laser (51.23) has experienced an error.
- code :
51.XY
- affichage :
51.<XY> ERROR
- description :
A printer error has occurred.
- code :
52.00
- affichage :
52.00 ERROR
- description :
The scanner has experienced a startup error.
- code :
52.20
- affichage :
52.20 ERROR
- description :
The scanner has experienced a rotational error.
- code :
52.XY
- affichage :
52.<XY> ERROR
- description :
A printer error has occurred.
- code :
53.XY.ZZ
- affichage :
53.XY.ZZ CHECK RAM DIMM SLOT <X>
- description :
A RAM DIMM error has occurred. X=1 slot toward the outside of the formatter board. X=2 is the slot closest to the hard disc.
- code :
54.01
- affichage :
54.01 ERROR
- description :
The environment sensor has experienced an error.
- code :
54.15
- affichage :
54.15 ERROR
- description :
The yellow-toner-level sensor has experienced an error.
- code :
54.16
- affichage :
54.16 ERROR
- description :
The magenta-toner-level sensor has experienced an error.
- code :
54.17
- affichage :
54.17 ERROR
- description :
The cyan-toner-level sensor has experienced an error.
- code :
54.18
- affichage :
54.18 ERROR
- description :
The black-toner-level sensor has experienced an error.
- code :
54.XX
- affichage :
54.<XX> ERROR
- description :
Error requires that the product be turned off then on.
- code :
55.00.00
- affichage :
55.00.00 DC CONTROLLER ERROR
- description :
The DC controller has experienced a communication error.
- code :
55.01.YY
- affichage :
55.01.YY DC CONTROLLER ERROR
- description :
The DC controller has experienced a memory error.
- code :
55.XX.YY
- affichage :
55.XX.YY DC CONTROLLER ERROR
- description :
The print engine is not communicating with the formatter.
- code :
56.02
- affichage :
56.02 ERROR
- description :
The product has experienced an output error.
- code :
56.X
- affichage :
56.X ERROR
- description :
A temporary printing error has occurred
- code :
57.01
- affichage :
57.01 ERROR
- description :
The laser/scanner-unit cooling fan (FM1) has experienced an error.
- code :
57.02
- affichage :
57.02 ERROR
- description :
The VOC fan (FM4) has experienced an error.
- code :
57.03
- affichage :
57.03 ERROR
- description :
The fuser cooling fan (FM2) has experienced an error.
- code :
57.04
- affichage :
57.04 ERROR
- description :
The cartridge area cooling fan (FM3) has experienced an error.
- code :
57.05
- affichage :
57.05 ERROR
- description :
The low-voltage power supply cooling fan (FM5) has experienced an error.
- code :
57.06
- affichage :
57.06 ERROR
- description :
The cartridge front area cooling fan (FM6) has experienced an error.
- code :
57.07
- affichage :
57.07 ERROR
- description :
The laser/scanner-unit cooling fan (FM1) has experienced an error.
- code :
57.08
- affichage :
57.08 ERROR
- description :
The delivery-unit cooling fan (FM7) has experienced an error.
- code :
57.09
- affichage :
57.09 ERROR
- description :
The IPTU feed-unit cooling fan (FM8) has experienced an error.
- code :
57.0A
- affichage :
57.0A ERROR
- description :
The duplexing-unit cooling fan (FM1) has experienced an error.
- code :
57.XX
- affichage :
57.XX ERROR
- description :
A temporary printing error has occurred.
- code :
58.04
- affichage :
58.04 ERROR
- description :
The low-voltage power supply has experienced an error.
- code :
58.XX
- affichage :
58.XX ERROR
- description :
A temporary printing error has occurred.
- code :
59.10
- affichage :
59.10 ERROR
- description :
The ITB motor has experienced a startup error.
- code :
59.20
- affichage :
59.20 ERROR
- description :
The ITB motor has experienced a rotational error.
- code :
59.30
- affichage :
59.30 ERROR
- description :
The fuser motor has experienced a startup error.
- code :
59.40
- affichage :
59.40 ERROR
- description :
The fuser motor has experienced a rotational error
- code :
59.50
- affichage :
59.50 ERROR
- description :
The black-image-drum motor has experienced a startup error.
- code :
59.51
- affichage :
59.51 ERROR
- description :
The cyan-image-drum motor has experienced a startup error.
- code :
59.52
- affichage :
59.52 ERROR
- description :
The magenta-image-drum motor has experienced a startup error.
- code :
59.53
- affichage :
59.53 ERROR
- description :
The yellow-image-drum motor has experienced a startup error.
- code :
59.60
- affichage :
59.60 ERROR
- description :
The black-image-drum motor has experienced a rotational error.
- code :
59.61
- affichage :
59.61 ERROR
- description :
The cyan-image-drum motor has experienced a rotational error.
- code :
59.62
- affichage :
59.62 ERROR
- description :
The magenta-image-drum motor has experienced a rotational error.
- code :
59.63
- affichage :
59.63 ERROR
- description :
The yellow-image-drum motor has experienced a rotational error.
- code :
59.C0
- affichage :
59.C0 ERROR
- description :
The developer-alienation motor has experienced a rotational error.
- code :
59.F0
- affichage :
59.F0 ERROR
- description :
The transfer-roller alienation motor has experienced an error.
- code :
59.XY
- affichage :
59.XY ERROR
- description :
A temporary printing error has occurred.
- code :
60.03
- affichage :
60.03 ERROR
- description :
The Tray-2 lifter motor has experienced an error.
- code :
60.04
- affichage :
60.04 ERROR
- description :
The Tray-3 lifter motor has experienced an error.
- code :
60.05
- affichage :
60.05 ERROR
- description :
The Tray-4 lifter motor has experienced an error.
- code :
60.06
- affichage :
60.06 ERROR
- description :
The Tray-5 lifter motor has experienced an error.
- code :
60.X
- affichage :
60.X ERROR
- description :
The tray specified by X is not lifting correctly.
- code :
66.12.01
- affichage :
66.12.01
- description :
Finisher-to-engine communication error The communication between the print engine and the finisher has been interrupted or lost.
- code :
66.12.02
- affichage :
66.12.02
- description :
Finisher board communication error Occurs when the finisher's stacker controller board has had a internal communication problem between the two processors on the board.
- code :
66.12.03
- affichage :
66.12.03
- description :
Finisher-control-board RAM error The checksum for the finisher stacker controller PCA has an error when the power is turned on.
- code :
66.12.11
- affichage :
66.12.11
- description :
Finisher error: swing motor (M36) and the swing-guide home-position sensor (PI35) Occurs when the swing guide does not leave its home position (swing-guide home-position sensor: PI35) after the swing motor (M36) is activated for 3 seconds. Also occurs when the swing guide does not return to its home position (swing-guide home-position sensor: PI35) after the swing motor (M36) is activated for 3 seconds.
- code :
66.12.12
- affichage :
66.12.12
- description :
Finisher error - shutter movement malfunction Normal operation: When the shutter clutch (CL31) and stack ejection lower roller clutch (CL32) are on, the shutter moves up (closed) when the stack ejection motor (M32) turns forward and moves down (open, delivery enabled) when the motor turns backwards. Error occurs when the shutter home position sensor (PI45) indicates no change when the stack ejection motor (M32) is activated for 3 seconds, indicating that the shutter is not moving.
- code :
66.12.13
- affichage :
66.12.13
- description :
Finisher error - stack trailing-edge motor (M39) In order to improve stacking performance when ejecting copies, a trailing edge assist guide is used in addition to the stack ejection roller to support the rear end of the stack during stack ejection. Error occurs when the stacker trailing-edge guide does not leave its home position (PI39) after the stack trailing-edge motor (M39) has been turned on for 3 seconds.
- code :
66.12.14
- affichage :
66.12.14
- description :
Finisher stapling and offsetting front-aligningplate motor failure In order to neatly align the paper stack for either stapling or offsetting to take place, the front and rear-aligning plates move to align each sheet when it enters the processing tray. The error occurs when the aligning plate either does not leave or when it does not return to the aligning-plate front-homeposition sensor (PI36) when the frontaligning- plate motor (M33) has been driven for 4 seconds.
- code :
66.12.15
- affichage :
66.12.15
- description :
Finisher stapling or offsetting rear aligning plate motor failure (M34) In order to neatly align the paper stack for either stapling or offsetting to take place, the front and rear aligning plates move to align each sheet when it enters the processing tray. The error occurs when the aligning plate either does not leave or when it does not return to the aligning-plate-rear-homeposition sensor (PI37) when the alignment plate rear motor (M34) has been driven for 4 seconds.
- code :
66.12.16
- affichage :
66.12.16
- description :
Finisher error - speed change motor (M40) The speed change motor M40 and sensor PI49 associated with this error have been removed from the output device prior to introduction to the field. This error message should never be seen in the field.
- code :
66.12.21
- affichage :
66.12.21
- description :
Finisher upper-stapler-motor failure (M41) Error occurs either when the stapler does not leave stapler home position (PI50) after staple motor (M41) is driven for 0.4 seconds or when it does not return to stapler home position after the staple motor has detected a motor lock condition and the motor is driven backwards for 0.4 seconds, attempting to reach home position. NOTE: PI50 and M41 are located on the stapler assembly and can only be replaced by replacing entire stapler assembly. M41 (staple motor) drives the insertion and crimping of the staple only (not location of the staple on paper). PI50 senses the home position of the stapler as it is inserting and crimping a staple only (not location of the staple on the paper). The stapler-safety switch (MS34) that assures that stapler motor (M41) is disabled when it senses a finger may be in the stapler.
- code :
66.12.22
- affichage :
66.12.22
- description :
Finisher upper stapler shift motor failure (M35) Error occurs when the stapler does not leave the stapler-shift home-position sensor (PI40) after the stapler-shift motor (M35) has driven for 5 seconds. Also occurs when the stapler fails to return to the stapler-shift home-position sensor (PI40) after the stapler-shift motor (M35) has been driven for 20 seconds.
- code :
66.12.23
- affichage :
66.12.23
- description :
Finisher upper-stapler failure Occurs when stapler alignment interference sensor (PI46) is activated, signaling that the stapler unit is not in its proper position for stapling to occur. This is to prevent damage to stapler from occurring when stapler is positioned over one of the three stoppers when the signal to staple has been sent.
- code :
66.12.31
- affichage :
66.12.31
- description :
Finisher error - 1st tray lift/lower motor (M37) Occurs when the output bin 1 does not activate the home-position sensor (PI41) when the output-bin-1 shift motor (M37) is driven for 20 seconds. Also occurs when output bin 1 does not move when output-bin-1 shift motor (M37) is driven for 4 seconds. Also occurs when output-bin-1 switch (MSW33) is activated while output bin 1 is operating. NOTE: Output-bin-1 home position is detected using the top sheet of paper on the bin when paper is present and the edge of the bin itself when there is no paper on the bin.
- code :
66.12.32
- affichage :
66.12.32
- description :
Finisher error: second-tray-lift/lower motor (M38) Occurs when the output bin 2 does not activate the home-position sensor (PI48) when the output-bin-1 shift motor (M38) is driven for 20 seconds. Also occurs when output bin 2 does not move when output-bin-1 shift motor (M38) is driven for 4 seconds. Also occurs when bin-2 upper limit is detected by PS983, PS982, PS981 on the Tray-2 shift PCA when no paper has been sensed by the output-bin-2 paper sensor (PI43). NOTE: Output-bin-2 home position is detected using the top sheet of paper on the bin when paper is present and the edge of the bin itself when there is no paper on the bin.
- code :
66.12.41
- affichage :
66.12.41
- description :
Finisher: folding-paper-positioning-plate motor (M4) The paper-positioning-plate motor (M4), located in the booklet-making area of the finisher, controls the up and down positioning of the stacked paper for stitch stapling and for folding. An error occurs when the paper-positioningplate home-position sensor (PI7) does not turn on when the paper-positioning-plate motor (M4) has been driven for 1500 pulses. Also occurs when the paper-positioning-plate home-position sensor (PI7) does not turn off when the paper-positioning-plate motor (M4) has been driven for 300 pulses.
- code :
66.12.42
- affichage :
66.12.42
- description :
Finisher error: folding-guide motor (M3) The guide motor (M3), located in the bookletmaking area of the finisher, controls the position of the guide plate. The guide plate is positioned in front of the folding rollers as the paper stack is being stapled, allowing the bottom edge of the paper to smoothly pass by the folding rollers. When the stacked paper is lowered to the folding position, the guide motor (M3) lowers the guide plate out of the way to allow the paper stack to be pushed into the folding rollers. Error occurs when The guide-home-position sensor (PI13) does not turn on when the guide motor (M3) has been driven for 700 pulses. Also occurs when the guide-home-position sensor (PI13) does not turn off when the guide motor (M3) has been driven for 50 pulses.
- code :
66.12.43
- affichage :
66.12.43
- description :
Finisher error: paper-fold motor (M2) M2: paper-fold motor, located in the booklet making area of the finisher, drives the rotation of the folding rollers to create the desired fold in the paper. The error occurs when the number of pulses by the paper-fold-motor clock sensor (PI4) is less than expected standard value. Also occurs when the status of the paper-fold home-position sensor (PI21) does not change when the paper-fold motor (M2) has been driven for 3 seconds.
- code :
66.12.44
- affichage :
66.12.44
- description :
Finisher - folding-paper-alignment motor (M5) M5: The alignment motor, located in the booklet making area of the finisher, drives the two alignment plates that adjust the side edges of the stacked paper so that the paper in the stack is perfectly aligned with one another. Error occurs when the aligning-plate homeposition sensor (PI5) does not turn on when the aligning plate motor (M5) has been driven for 500 pulses. Also occurs when the aligning-plate homeposition sensor (PI5) does not turn off when the aligning-plate motor (M5) has been driven for 50 pulses.
- code :
66.12.45
- affichage :
66.12.45
- description :
Finisher: paper-pushing-plate motor (M8) Error occurs when the paper-pushing-plate home-position sensor (PI14) does not turn on when the paper-pushing-plate motor (M8) has been driven for 0.3 seconds. Also occurs when the paper-pushing-plate home-position sensor (PI14) does not turn off when the paper-pushing-plate motor (M8) has been driven for 80 ms. Also occurs when the paper pushing-plate leading-edge-position sensor (PI15) does not turn off when the paper-pushing-plate motor (M8) has been driven for 80 ms. Also occurs when the number of pulses detected by the paper-pushing-plate motor clock sensor (PI1) is less than expected standard value. Also occurs when the paper pushing-plateleading- edge-position sensor (PI15) does not turn on when the paper-pushing-plate motor (M8) has been driven for 0.3 seconds.
- code :
66.12.46
- affichage :
66.12.46
- description :
Finisher: communication lost with stitcher controller PCA Error occurs when communication between the stacker-controller board and the saddlestitcher- controller board has been lost or interrupted.
- code :
66.12.47
- affichage :
66.12.47
- description :
Finisher error: micro switches and doors There are three switches in the bookletmaker finisher: SW1 (saddle-guide switch also known as the inlet-door switch), SW3 the booklet-ejection door switch, and MS31 the front-door switch. The stapler/stacker finisher only has one switch, MS31 for the front door of the finisher. All three switches detect if the associated door or guide plate is open or closed. Each of the switches also have a sensor (SW1/PI9, SW3/PI3, and MS31/PI32) that acts as a backup and detects the same information as the switches. The error occurs when all the doors and guides are closed and there is a mismatch in readings between the sensors and the switches. For example, the front-finisher door is closed, PI32 senses the door is closed and MS31 senses the door is still open. Associated finisher door and guide switches and sensors are as follows: • Saddle-guide switch SW1 and saddleguide sensor PI9 • Booklet-ejection-door switch SW3 and booklet-ejection-door sensor PI3 • Front-door switch MS31 and front-door sensor PI32
- code :
66.12.51
- affichage :
66.12.51
- description :
Finisher error- rear-booklet-stapler motor (M6) The booklet-maker stitch staplers do not move to different locations in relation to the paper like the main stapler. The only movement is through the movement of the rotary cam located on the stapler unit itself, during the actual stapling of the booklet. The stitch-home-position switch (SW5) is part of the rear stitch stapler unit and senses the stapler opening and closing during stapling by the motion of the rotary drive cam. Like SW5, the stitch motor (M6) is also part of the overall stitch-stapler unit and replacement requires the replacement of saddle-stapler assembly. Error occurs when the front booklet-makerstapler stitching-home-position sensor (SW5) does not turn on when the stitch motor (rear) (M6) has been driven forward for 0.5 seconds. Also occurs when the front booklet-makerstapler stitching-home-position sensor (SW5) does not turn off when the stitch motor (rear) (M6) has been driven forward for 0.5 seconds.
- code :
66.12.52
- affichage :
66.12.52
- description :
Finisher error - front booklet-stapler motor (M7) The booklet-maker stitch staplers do not move to different locations in relation to the paper like the main stapler. The only movement is through the movement of the rotary cam located on the stapler unit itself, during the actual stapling of the booklet. The stitch-home-position switch (SW7) is part of the front stitch stapler unit and senses the stapler opening and closing during stapling by the motion of the rotary drive cam. Like SW7, the stitch motor (M7) is also part of the overall stitch stapler unit and replacement requires the replacement of saddle-stapler assembly. Error occurs when the front booklet-maker stapler stitching home position sensor (SW7) does not turn on when the stitch motor (front) (M7) has been driven forward for 0.5 seconds. Also occurs when the front booklet-maker stapler-stitching home-position sensor (SW7) does not turn off when the stitch motor (front) (M7) has been driven forward for 0.5 seconds.
- code :
66.XY.ZZ
- affichage :
66.XY.ZZ SERVICE ERROR
- description :
The external paper-handling controller has detected a failure.
- code :
68.X
- affichage :
68.X STORAGE ERROR SETTINGS CHANGED
- description :
One or more product settings are invalid and have been reset to the factory-default settings. Printing can continue, but some unexpected functions might occur if an error occurred in permanent storage.
- code :
69.X
- affichage :
69.X ERROR
- description :
A temporary printing error occurred.
Le problème provient probablement d'une pièce à remplacer.
Pièces d'usures remplacées frequemment sur la HP Color LaserJet CP6015, CP6015N, CP6015DN, CP6015XH
Nomenclature des pièces détachées de la HP Color LaserJet CP6015, CP6015N, CP6015DN, CP6015XH
RL1-1289-000CN | ROLLER, PICK |
Q3931-67935 | 110-127V FUSER KIT (FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE) Kit Part Number |
Q3931-67914 | 110-127V FUSER KIT (FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE) Kit Part Number |
Q3931-69001 | 110V Fuser kit (Four, unité de fusion, kit de maintenance) Repaired |
Q3931-67902 | 128MB 167MHz 200 pin DDR DIMM |
Q3931-67915 | 220-240V FUSER KIT (FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE) Kit Part Number |
Q3931-67936 | 220-240V FUSER KIT (FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE) Kit |
Q3931-69002 | 220V Fuser kit (Four, unité de fusion, kit de maintenance) Repaired |
Q3931-67903 | 256MB 167MHz 200 pin DDR DIMM |
RM1-3319-000CN | 2ND TRNSFR. ROLLER ASS Y |
Q3931-67910 | 2ND TRNSFR. ROLLER ASSY Kit |
CB474-69001 | 500 Bac à papier Kit |
Q3931-67904 | 512MB 167MHz 200 pin DDR DIMM |
FM2-0710-000CN | APPROACH SWITCH ASSY |
Q7815-67904 | Arabic Font USB Solution |
RM1-4107-000CN | AREA SENSOR FLAG ASSY |
FM2-0709-000CN | AREA SENSOR HOLDER ASSY |
4G1-1498-000CN | AREA SENSOR PCB ASSY |
RC1-9189-000CN | ARM, 1ST ESTRANGEMENT |
4A3-1763-000CN | ARM, ADJUSTMENT, FRONT |
4A3-1764-000CN | ARM, ADJUSTMENT, REAR |
RM1-3581-050CN | Assembly-DC Controller PCB, 1.61 |
RM1-3581-080CN | Assembly-DC Controller PCB, 1.83 |
RM1-3581-040CN | Assembly-DC Controller PCB, R1.57.00 |
RC1-9043-000CN | BAND, DOOR |
XG9-0586-000CN | BEARING, BALL |
4S3-1050-000CN | BEARING,BALL,6902ZZNR |
XF2-1608-840CN | BELT, TIMING |
XF2-1607-860CN | BELT, TIMING, COGGED |
XF9-0748-000CN | BELT, TIMING, COGGED |
XF2-3837-340CN | BELT,TIMING |
Q6999-67902 | Booklet Delivery Bin |
RM1-4113-000CN | Booklet Output Bin Assembly |
RU5-1080-000CN | BUSHING |
RC1-8734-000CN | BUSHING |
FU5-1169-000CN | BUSHING |
RC1-9300-000CN | BUTTON, MAIN SWITCH |
RM1-3258-000CN | C.P.R. SENSOR ASS Y |
RM1-4128-000CN | CABLE MOUNT LATTICE ASSY |
RM1-5029-000CN | CABLE, FIXING OPEN SENSOR |
RK2-1356-000CN | CABLE, FLEXIBLE FLAT |
RK2-1354-000CN | CABLE, LASER FLEXIBLE FLAT |
RK2-1355-000CN | CABLE, LASER FLEXIBLE FLAT |
FG3-2903-000CN | CABLE, OPERATION TRAY |
4G1-2283-000CN | CABLE, SADDLE UNIT |
4G1-2285-000CN | CABLE, SENSOR |
FG3-2892-000CN | CABLE, SOLENOID |
4G3-1777-000CN | CABLE, STAPLE CONNECTING ASSY |
RM1-5030-000CN | CABLE, TP/T2 OPEN SENSOR |
RM1-3254-000CN | CARTOUCHE, TONER CONTACT HOLDER ASS Y |
RM1-4419-000CN | CARTOUCHE, TONER INTERFACE ASSY |
Q3931-67926 | Cartouche, toner Interface assy Kit and servic |
Q3931-67917 | Cartouche, toner Interface assy Kit and servic |
RM1-3202-040CN | CASSETTE ASS Y |
Q3931-67918 | CASSETTE ASSY Kit |
RM1-3212-000CN | Cassette Front Assembly |
RM1-3206-000CN | CASSETTE PAPER PICK-UP ASS Y |
WT2-5912-000CN | CLAMP, FFC |
RC1-9261-000CN | CLAMP, FORMATTER CABLE |
FC5-5021-000CN | CLAW, LATCH, RIGHT |
WT2-5694-000CN | CLIP CLAMP, WIRE |
Q3938-67968BULK | CLJ CP6015/CM6030/CM6040 Roller Kit |
4H3-0370-000CN | CLUTCH, ELECTROMAGNETIC |
VS1-7177-003CN | CONNECTOR |
VS1-7177-002CN | CONNECTOR, 2P |
VS1-7258-014CN | CONNECTOR, DRAWER |
RM1-4516-000CN | CONTROL PANEL UNIT |
RC1-9201-000CN | COVER, CASSETTE BACK END |
Q3931-67905 | COVER, FACE-DOWN |
RC1-9340-000CN | COVER, FACE-DOWN |
RC1-9360-000CN | COVER, FACE-DOWN DRIVE |
RC2-1351-000CN | COVER, INTERNAL, LOWER |
RL1-1477-000CN | COVER, INTERNAL, LOWER |
RC1-9348-000CN | COVER, INTERNAL, RIGHT |
RC1-9336-000CN | COVER, LEFT |
RC2-1280-000CN | COVER, LEFT LOWER |
RC1-9211-000CN | COVER, MAIN SWITCH |
RC1-9511-000CN | COVER, MOTOR |
RC1-8527-000CN | COVER, MULTI-PURPOSE BLANKING |
RC2-1347-000CN | COVER, OPTION SLIDE |
RC1-9341-000CN | COVER, PANEL |
RC2-1278-000CN | COVER, REAR |
RL1-1210-000CN | COVER, REAR |
RC1-9344-000CN | COVER, REAR LEFT |
RC1-9342-000CN | COVER, REAR UPPER |
RC1-9339-000CN | COVER, RIGHT UPPER |
RC2-1279-000CN | COVER, TRAY CONNECTOR |
RM1-3624-000CN | CPR JOINT CABLE |
Q7815-67902 | Cyrillic Font USB Solution |
RC1-8925-000CN | DAMPER, GEAR |
RM1-3610-000CN | DC CONT. POWER CABLE |
Q3931-67922 | DC Controller Kit |
Q3931-67916 | DC Controller Kit with service document |
RM1-3581-000CN | DC CONTROLLER PCB ASS Y |
RM1-3581-070CN | DC CONTROLLER PCB ASSY |
RM1-4519-000CN | DC MOTOR ASS Y |
FM2-1639-000CN | DELIVERY SWITCH MOUNT ASSY |
VS1-7258-012CN | Drawer connector |
RM1-3286-000CN | DRUM MOTOR ASS Y |
RC1-8961-000CN | DUCT, AIR |
RC1-9276-000CN | DUCT, CARTOUCHE, TONER |
RC1-8964-000CN | DUCT, FACE-DOWN JOINT |
RC1-9334-000CN | DUCT, SCANNER |
RC1-9309-000CN | DUCT, SCANNER FAN |
Q3931-67921 | DUPLEX Switchback TRAY ASSY Kit |
RM1-3665-000CN | DUPLEXING FEED ASS Y |
RM1-3652-000CN | DUPLEXING REVERSE ASS Y |
RM1-3652-040CN | DUPLEXING REVERSE ASSY |
RM1-5948-000CN | DUPLEXING TRAY ASSY |
RM1-4110-000CN | ENTRANCE LOWER GUIDE ASSY |
FM2-0718-000CN | ENTRANCE SENSOR FLAG ASSY |
RM2-5849-000CN | ENTRANCE SENSOR FLAG ASSY |
RM1-4172-000CN | ENTRANCE UPPER GUIDE ASSY |
RM1-3340-000CN | FACE-DOWN END TRAY ASS Y |
RM1-4391-000CN | FACE-DOWN FULL FLAG ASS Y |
RM1-3293-010CN | FACE-DOWN PAPER DELIVERY ASS Y |
RM1-3293-000CN | FACE-DOWN PAPER DELIVERY ASS Y |
RM1-3390-000CN | FACE-DOWN UNIT 1 CABLE |
RM1-3391-000CN | FACE-DOWN UNIT 2 CABLE |
RK2-1377-000CN | FAN |
RK2-1378-000CN | FAN |
RK2-1382-000CN | FAN |
RM1-3364-000CN | FAN ASS Y |
4G3-0733-000CN | FEED MOTOR ASSY |
RL1-1291-000CN | FILTER UNIT, AIR |
Q3931-67906 | FILTER UNIT, AIR Kit Part Number |
RC1-9313-000CN | FILTER UNIT, AIR |
RM1-3242-000CN | FIXING ASS Y |
RM1-3242-020CN | FIXING ASS Y |
RM1-3244-000CN | FIXING ASS Y |
Q3931-67941 | Fixing Assembly kit |
Q3931-67940 | Fixing Assembly Kit |
RM1-3242-030CN | FUSER KIT (FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE) |
RM1-3244-020CN | Fuser kit (Four, unité de fusion, kit de maintenance) |
RM1-3244-030CN | FUSER KIT (FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE) |
RM1-4409-000CN | FIXING BIAS CABLE ASS Y |
RM1-5950-000CN | FIXING FAN COVER ASS Y |
RM1-3612-000CN | FIXING JOINT CABLE |
RM1-3217-000CN | FIXING MOTOR CABLE |
RM1-3247-020CN | FIXING ONE-WAY |
RM1-3247-000CN | FIXING ONE-WAY GEAR ASS Y |
RM1-3218-000CN | FIXING POWER SUPPLY ASS Y |
FC5-5004-000CN | FLAG, PAPER SENSING SENSOR |
FB3-7925-030CN | FLAG, ROLLER |
FB5-5937-020CN | FLAG, SENSOR |
FB3-7979-000CN | FLAG, SENSOR |
FB3-7928-020CN | FLAPPER #1 (DEFLECTOR) |
FB5-2697-000CN | FLAPPER #2 (DEFLECTOR) |
FM2-0720-000CN | FLEXIBLE CABLE MOUNT ASSY |
RC1-9208-000CN | FOOT, RUBBER |
Q7539-69001 | Formatter (NW/HDI) |
RM1-3253-000CN | FORMATTER CASE ASS Y |
RM1-3617-000CN | FRONT CABLE |
RM1-3356-000CN | FRONT DOOR ASSY |
FS6-0830-000CN | GEAR, 16T |
FS6-0823-000CN | GEAR, 16T |
FS6-0822-000CN | GEAR, 16T/33T |
FS6-0829-000CN | GEAR, 16T/56T |
FU5-0457-000CN | GEAR, 17T |
FU5-2399-000CN | GEAR, 29T |
FU5-0428-000CN | GEAR, 30T |
RU5-0791-000CN | GEAR, 34T |
FU5-0454-000CN | GEAR, 40T |
FU5-0435-000CN | GEAR, 44T |
4S3-0171-000CN | GEAR, 50T |
RU5-0790-000CN | GEAR, 83T/25T |
Q7815-67903 | Greek Font USB Solution |
RM1-3225-000CN | GRIP SUPPORT FRONT ASS Y |
RM1-3226-000CN | GRIP SUPPORT REAR ASS Y |
4G3-0725-000CN | GUIDE MOTOR ASSY |
RM1-4400-000CN | GUIDE SENSOR ASS Y |
RC1-9329-000CN | GUIDE, CABLE |
RC1-9306-000CN | GUIDE, CABLE, A |
RC1-9307-000CN | GUIDE, CABLE, B |
RC1-9308-000CN | GUIDE, CABLE, C |
RC1-9312-000CN | GUIDE, CABLE, D |
RC1-9318-000CN | GUIDE, CABLE, E |
RC1-9323-000CN | GUIDE, CABLE, F |
RL1-1335-000CN | GUIDE, DUPLEXING FEED, UPPER |
RC1-8959-000CN | GUIDE, FACE-DOWN INNER |
RC1-9332-000CN | GUIDE, FIXING CABLE |
RC1-9185-000CN | GUIDE, I.T.B. ENTRANCE, FRONT |
RC1-9186-000CN | GUIDE, I.T.B. ENTRANCE, REAR |
RL1-1283-000CN | GUIDE, MULTI-PURPOSE, RIGHT |
RC1-8526-000CN | GUIDE, MULTI-PURPOSE, UPPER |
RC1-8526-020CN | GUIDE, MULTI-PURPOSE, UPPER |
RC2-1284-000CN | GUIDE, SIDE WALL |
Q7829-67925 | HCI FEED ROLLER (BLUE) |
Q7829-67925-5 | HCI FEED ROLLER (BLUE) |
Q7815-67901 | Hebrew Font USB Solution |
RM1-3582-000CN | HIGH VOLTAGE TRAN. A PCB ASS Y |
RM1-5475-000CN | HIGH VOLTAGE TRAN. B PCB ASS Y |
RC1-9277-000CN | HOLDER, CARTOUCHE, TONER FAN |
RC1-9324-000CN | HOLDER, ENVIRONMENT SENSOR |
RC1-9278-000CN | HOLDER, FIXING FAN |
RC1-9328-000CN | HOLDER, HIGH VOLTAGE CONNECTOR |
FB3-7973-000CN | HOLDER, ROLLER, 2 |
RC1-9279-000CN | HOLDER, SCANNER FAN |
RC1-9260-000CN | HOLDER, SCANNER THERMISTOR |
CB384-67901 | HP CLJ Black Image Drum CB384A |
CB385-67901 | HP CLJ Cyan Image Drum CB385A |
CB381-67901 | HP CLJ Cyan Print Cartouche, toner |
CB387-67901 | HP CLJ Magenta Image Drum CB387A |
CB383-67901 | HP CLJ Magenta Print Cartouche, toner |
CB386-67901 | HP CLJ Yellow Image Drum CB386A |
CB382-67901 | HP CLJ Yellow Print Cartouche, toner |
CB457A | HP Color LaserJet 110volt Fuser kit (Four, unité de fusion, kit de maintenance) KiT |
RM1-3240-000CN | I.T.B. DRAWER ASS Y |
RM1-4401-000CN | I.T.B. DUCT ASS Y |
RM1-3280-000CN | I.T.B. ESTRANG. DRIVE ASS Y |
RM1-3215-000CN | I.T.B. LOCK SUPPORT REAR ASS Y |
RM1-3228-000CN | I.T.B.LOCK SUPPORT FRONT ASS Y |
Q3938-67989-BU | Image transfer assembly |
Q3938-67965 | Image Transfer Kit (150K life) |
Q3938-68001 | IMAGE TRANSFER KIT (150K LIFE) |
Q3938-67989 | IMAGE TRANSFER KIT (150K LIFE) |
RM1-4123-000CN | INNER COVER ASSY |
4G3-0671-000CN | INNER SIDE PLATE ASSY |
RM1-3623-000CN | INTERFACE JOINT CABLE |
RM1-3589-000CN | INTERLOCK SWITCH ASS Y |
RM1-3307-BULK | INTERMEDIATE TRANS. BELT ASS Y |
RM1-3307-000CN | INTERMEDIATE TRANS. BELT ASS Y |
RM1-3307-040CN | INTERMEDIATE TRANS. BELT ASS Y |
Q3931-67908 | INTERMEDIATE TRANS. BELT ASSY kit |
RC1-9348-020CN | INTERNAL RIGHT COVER |
Q7539-69004 | KIT- FRMTR REPLACEMENT |
Q7539-69005 | KIT- FRMTR REPLACEMENT 04,090,2 Rohs2.04 |
Q7539-69002 | KIT- FRMTR REPLACEMENT 04.043.2 |
Q7539-69003 | KIT- FRMTR REPLACEMENT 04.090.2 |
Q3931-67938 | Kit of 12 rollers- 1 set tray 2 to 5 |
Q3931-67938BULK | Kit of 12 rollers-1 set tray 2 to 5 |
Q3931-67930 | Kit-DC Cont. w/service doc, 1.61 |
Q3931-67931 | Kit-DC Cont. w/service doc, 1.61 |
Q3931-67928 | Kit-DC Controller w/service doc, 1.57- |
Q3931-67937 | Kit-DC Controller w/service doc, 1.83 |
FB3-7881-000CN | KNOB |
FC5-5024-000CN | KNOB, LATCH |
Q3931-67939 | Latch Hooks for 2nd Transfer Assy |
RM1-4141-000CN | LED PCB ASSY |
RM1-3233-000CN | LEFT SIDE WALL ASS Y |
RM1-4129-000CN | LEFT UPPER COVER ASSY |
RC1-9220-000CN | LEVER, DOOR INTERLOCK SHUTTER |
RC1-8928-000CN | LEVER, PAPER SENSING |
4A3-1782-000CN | LEVER, STOPPER |
RM1-3222-020CN | LIFTER DRIVE ASS Y |
RM1-3222-150CN | Lifter drive assy |
FC5-3657-000CN | LIMITER, TORQUE |
RC1-8519-000CN | LIMITTER, TORQUE |
4G3-0271-000CN | LINK SLIDE ASSY |
RM2-0190-000CN | LOW VOLTAGE POWER SUPPLY ASS Y |
RM1-3594-000CN | LOW VOLTAGE POWER SUPPLY ASS Y |
RM1-4135-000CN | LOWER HEIGHT GUIDE ASSY |
RM1-3345-000CN | M.P. PAPER PICK-UP ASS Y |
RM1-3345-110CN | M.P. PAPER PICK-UP ASS Y |
RM1-4139-050CN | MAIN CONTROLLER PCB ASSY |
RM1-4139-000CN | MAIN CONTROLLER PCB ASSY |
RM1-4416-030CN | Main Drive Unit |
Q3931-67911 | Main Drive Unit Kit and Service Document |
RM1-4416-000CN | MAIN DRIVE UNIT |
RM1-3252-000CN | MAIN SWITCH HOLDER ASS Y |
RM1-3585-000CN | MEMORY TAG PCB ASS Y |
RM1-4119-000CN | MIDDLE HEIGHT COVER ASSY |
4G3-0670-000CN | MOTOR MOUNT ASSEMBLY |
4K1-1103-000CN | MOTOR, STEPPING |
RK2-1370-000CN | MOTOR, STEPPING, DC |
RK2-1366-000CN | MOTOR, STEPPING, DC |
RM1-3630-000CN | MULTI TRAY CABLE |
RM1-3366-010CN | MULTI-PURPOSE DRIVE ASS Y |
RM1-3366-000CN | MULTI-PURPOSE DRIVE ASS Y |
RM1-3291-000CN | MULTI-PURPOSE GUIDE ASS Y |
RM1-3341-000CN | MULTI-PURPOSE TRAY ASS Y |
RM1-4125-000CN | OPERATION TRAY ASSY |
FM2-1708-000CN | OPTION SENSOR ASSY |
RM1-4105-000CN | OUTPUT BIN 2 (STACK LOWER TRAY ASSY) |
RM1-4102-000CN | OUTPUT BIN1(BM) (STACK UPPER TRAY ASSY) |
RM1-4101-000CN | OUTPUT BIN1(SS) (STACK UPPER TRAY ASSY) |
Q3931-40051 | Overlay-Control Panel-EN/AR |
Q3931-40059 | OVERLAY-CONTROL PANEL-EN/HE |
Q3931-40053 | Overlay-Control Panel-EN/HE |
RM1-3389-000CN | PANEL CABLE |
RM1-3622-000CN | PANEL JOINT CABLE |
RC2-1283-000CN | PANEL, HEIGHT, UPPER |
RM1-4407-000CN | PAPER DELIVERY GUIDE ASS Y |
4G3-1624-000CN | PAPER FACE SENSING ASSY |
4G3-0934-000CN | PAPER FACE SENSOR ASSY |
RM1-0037-020CN | PAPER FEED ROLLER ASSY |
RM1-3533-010CN | PAPER PICK-UP ASSY |
FM2-0707-000CN | Paper Sensor Assy |
RM1-3238-000CN | PARTITION PLATE ASS Y, CYAN |
RM1-3237-000CN | PARTITION PLATE ASS Y, MAGENTA |
RM1-3235-000CN | PARTITION PLATE ASS Y, YELLOW |
WG8-5696-000CN | Photo interrupter, TLP1243 |
RM1-3250-000CN | PHOTOSENSOR ASS Y |
XD3-2200-102CN | PIN, DOWEL |
XD3-2300-142CN | PIN, DOWEL |
XD9-0240-000CN | PIN, DOWEL |
XD3-2300-202CN | PIN, DOWEL |
RC1-9238-000CN | PLATE, CONTROL PANEL GROUNDING |
RC1-9235-000CN | PLATE, DRAWER GUARD |
RC1-9190-000CN | PLATE, FAN FIXING, FRONT |
RL1-1216-000CN | PLATE, FIXING MOTOR |
RC2-1356-000CN | PLATE, GROUNDING |
4A3-1955-000CN | PLATE, GROUNDING |
4A3-4715-000CN | PLATE, HINGE STOP |
RC1-9326-000CN | PLATE, HVT-A GUARD |
FC5-6978-000CN | PLATE, OPTION TRAY, FRONT |
4A3-1779-000CN | PLATE, ROTATION |
RC1-9246-000CN | PLATE, SENSOR, FRONT |
FM2-1409-000CN | PRESS MOTOR ASSY |
FM2-0730-000CN | PRESSURE ROLLER ASSEMBLY |
FS6-0815-000CN | PULLEY, 16T/GEAR, 32T |
FU5-3086-000CN | PULLEY, 20T |
FS5-3576-000CN | PULLEY, 30T |
FS6-0814-000CN | PULLEY, 32T/GEAR, 16T |
FS5-3577-000CN | PULLEY, 39T |
FB3-7967-000CN | RACK, FRONT |
FC5-5436-000CN | RACK, RAIL |
FB3-7934-000CN | RACK, REAR |
RL1-1215-000CN | RAIL, CASSETTE, RIGHT |
RC1-8931-000CN | RAIL, FIXING, FRONT |
RC1-8939-000CN | RAIL, FIXING, REAR |
RL1-1213-000CN | RAIL, LEFT, TOP |
RC1-9206-000CN | RAIL, REVERSE, REAR |
RM1-3354-000CN | REAR COVER MOUNT PLATE ASS Y |
FM2-0763-000CN | REAR END SENSOR ASSY |
RM1-3618-000CN | REAR LOWER CABLE |
RM1-4415-000CN | REAR RIGHT COVER ASS Y |
RM1-3619-000CN | REAR UPPER CABLE |
Q3931-67909 | Reg 2nd transfr. Assy Kit and Service D |
RM1-3310-000CN | REGISTRATION 2ND TRNSFR. ASS Y |
Q5950-67901 | Replacement-Black Print Cartouche, toner |
RC1-8511-000CN | RETAINER |
RM1-3333-000CN | RIGHT DOOR SUB ASS Y |
RL1-1280-000CN | RIGHT LOWER COVER ASS Y |
RM1-3239-000CN | RIGHT SIDE WALL ASS Y |
XD2-3100-152CN | RING, C, EXTERNAL |
XD9-0234-000CN | Ring, E |
Q3938-67968 | Roller Kit (150K life) |
Q3938-67968-BU | Roller Kit (150K life) |
4A3-1783-000CN | ROLLER, FOLDING |
RC1-8567-000CN | ROLLER, PAPER PICK-UP |
RL1-1289BULK | ROLLER, PAPER PICK-UP |
RM1-4392-000CN | ROLLER, RETARD |
FC5-4221-000CN | ROLLER, TRAY GUIDE |
RU5-6035-000CN | ROLLER, TRAY GUIDE |
RM1-4140-000CN | SADDLE CONTROLLER PCB ASSY |
FM2-0756-000CN | SADDLE GUIDE ASSEMBLY |
FM2-0737-000CN | SADDLE MOTOR ASSY |
RM1-4130-000CN | SADDLE PAPER DELIVERY ASSY |
RM1-4136-000CN | SADDLE PAPER FEEDER ASSY |
RM1-4109-000CN | SADDLE PAPER FEEDER ASSY |
RM1-4178-000CN | SADDLE STAPLER ASSEMBLY |
RM1-3450-000CN | SCANNER ASS Y |
Q3931-67907 | SCANNER ASSY Kit Part Number |
RM1-3620-000CN | SCANNER JOINT CABLE |
XB2-8300-607CN | SCREW M3X6 |
XA9-1495-000CN | SCREW RS M3X6 |
XB1-2400-805CN | SCREW, MACH, TRUSS HEAD, M4X8 |
FU5-9059-000CN | SCREW, RS STEPPED, M3 |
XA9-1801-000CN | SCREW, RS, M13X12 |
XA9-1449-000CN | SCREW, RS, M3X8 |
XB4-5401-209CN | SCREW, RS, M4X8 |
XB6-7303-005CN | Screw, TP, M3x30 |
XA9-1469-000CN | SCREW, TP, M3X6 |
XA9-1448-000CN | Screw, TP, M4X8 |
XA9-1300-000CN | Screw, TP, M4X8 |
XA9-1422-000CN | SCREW, W/WASHER, M4X12 |
XA9-1504-000CN | SCREW,RS,M3X8 |
XB1-2300-407CN | SCREW:M3X4 TRUSS |
XA9-1159-000CN | Screw-TP M3x6 |
RK2-2376-000CN | SENSOR UNIT, HUMIDITY |
FM2-1417-000CN | SENSOR/SWITCH ASSY |
FC5-5542-000CN | SHEET, ENTRANCE GUIDE |
RC1-9232-000CN | SHEET, FIXING CROSSMEMBER |
FM2-1401-000CN | SHUTTER H.P. SENSOR ASSY |
FL2-0821-000CN | SOLENOID |
RC1-9233-000CN | SPRING, LEAF |
4S3-2117-000CN | SPRING, TENSION |
4S3-2116-000CN | SPRING, TENSION |
FS6-2582-000CN | SPRING, TENSION |
RU5-2822-000CN | SPRING, TENSION |
RU5-2796-000CN | SPRING, TENSION |
RC1-9244-000CN | SPRING, TORSION |
FB3-7980-000CN | SPRING, TORSION |
FC5-5005-000CN | SPRING, TORSION |
RU5-2825-000CN | SPRING, TORSION |
4G3-0769-000CN | STACK EJECTION MOTOR ASSY |
RM1-4104-000CN | STACK TRAY ASSY |
RM1-4101-020CN | STACK UPPER TRAY ASSY |
FM2-0721-000CN | STAPLE ASSEMBLY |
FM2-0722-000CN | STAPLER SUB ASSY |
FL2-0846-000CN | STAPLER UNIT |
RM1-4108-000CN | SWING GUIDE ASSY |
FM2-1423-000CN | SWING PRESS SHAFT ASSY |
RM1-3360-000CN | SWITCH BACK COVER ASSY |
RM1-4411-000CN | T2 GUIDE ARM ASS Y |
RM1-4402-000CN | TAG PCB HOLDER ASS Y |
XB4-7401-005CN | Tapping screw Truss Head M4x10 |
RK2-1363-000CN | THERMISTOR UNIT |
RM1-3232-000CN | THERMO PILE CASE ASS Y |
RM1-4418-000CN | TONER CARTOUCHE, TONER DRIVE ASS Y |
RM1-4417-000CN | TONER CARTOUCHE, TONER DRIVE ASS Y |
Q3931-67913 | Toner Cartouche, toner Drive Assy Kit and Serv |
Q3931-67912 | Toner Cartouche, toner Drive Assy Kit and Serv |
RM1-3385-000CN | TONER MOTOR CABLE |
RM1-3383-000CN | TONER MOTOR CABLE |
RL1-1284-000CN | TOP COVER ASS Y |
RM1-4121-000CN | TOP DOOR ASSY(SS)(UPPER COVER ASSEMBLY) |
RM1-3230-000CN | TRANSFER CONTACT HOLDER ASS Y |
Q3931-67920 | Tray 1 pick-up, retard roller Kit |
Q3931-67919 | Tray 2 pick-up,feed roller Kit |
FG3-2887-000CN | TRAY DRIVER PCB ASSY |
4A3-5931-000CN | UNIVERSAL CASTER |
4A3-6322-000CN | UNIVERSAL CASTER |
4G3-0210-000CN | UPPER COVER LOCK ASSY |
RM1-4131-000CN | UPPER DELIVERY GUIDE ASSEMBLY |
RM1-3640-000CN | WASTE TONER SENSOR CABLE |
RC2-1734-000CN | WINDOW, LED |
Caractéristiques techniques
HP Color LaserJet CP6015, CP6015N, CP6015DN, CP6015XH

Vitesse noir | 41 ppm |
Vitesse couleur | 41 ppm |
Bac à papier | 500 feuilles |
Ref toner noir | CB380A |
Capacité toner noir | 16500 pages |
Ref toner couleur | CB381A |
Capacité toner couleur | 21000 pages |