HP LaserJet M4345 MFP, M4345X, M4345XS, M4345XM
Dépannage et réparation dans le Grand Lyon

Printer image

Votre imprimante laser HP LaserJet M4345 MFP, M4345X, M4345XS, M4345XM
est en panne ?

Notre technicien peut intervenir sur site
pour la dépanner.

Nos spécialistes sont en mesure de prendre en charge toutes les pannes :

Indiquez-nous la panne rencontrée pour obtenir un diagnostic.

  • Défauts d’impression (traces, points, traits...)
  • Bourrages papier (départ papier, feuille froissée en accordéon...)
  • Message ou code erreur
  • Fuite de toner
  • Bruit anormal
  • Panne électronique
  • Paramétrage
  • Accessoire
  • Pièce détachée
  • Machine complète

... ou le code erreur qui s'affiche sur l'écran de votre imprimante.

Codes erreur rencontrés fréquemment sur l'imprimante
HP LaserJet M4345 MFP, M4345X, M4345XS, M4345XM

Le code affiché sur votre imprimante est plus long que celui indiqué dans cette liste.
Par exemple si l'écran de l'imprimante indique un code 13.00.02, nous ne retenons que le début du code, c'est à dire 13.
Le code 13 renvoie à un type de problème, les chiffres qui suivent pouvant apporter une précision.

printer-icon

Code erreur 10 : Problème de mémoire consommable, puce HS


Code erreur 13 : Bourrage papier


Code erreur 41 : Format de papier inattendu


Code erreur 49 : Format de fichier incorrect (pdf ou autre) ou pb de firmware


Code erreur 50 ou Erreur Station fusion ou Remplacer kit de maintenance : Problème de four (kit de maintenance)


Code erreur 51 : Panne de moteur laser


Code erreur 57 : Panne de ventilateur


Code erreur 59 : Panne de moteur


Tableau de tous les codes erreur de la HP LaserJet M4345 MFP, M4345X, M4345XS, M4345XM

-

- code :

-

- affichage :

Warming up scanner

- description :

The scanner is warming up and cannot be used.

10.00.YY

- code :

10.00.YY

- affichage :

10.XX.YY SUPPLY MEMORY ERROR

- description :

The MFP cannot read or write to at least one print cartridge e-label or an e-label is missing from a print cartridge.
E-label is damaged.

10.10.YY

- code :

10.10.YY

- affichage :

10.XX.YY SUPPLY MEMORY ERROR

- description :

The MFP cannot read or write to at least one print cartridge e-label or an e-label is missing from a print cartridge.
MFP cannot communicate with the e-label.

10.32.00

- code :

10.32.00

- affichage :

10.32.00 Unauthorized supply installed

- description :

A print cartridge or other supply posing as genuine HP supply does not pass an authentication test.

11.XX

- code :

11.XX

- affichage :

11.XX Internal clock error - To Continue Touch OK

- description :

The MFP real time clock has experienced an error.

13.01.00

- code :

13.01.00

- affichage :

13.JJ.NT JAM IN TRAY X - Clear jam, then touch OK

- description :

Media is jammed in the specified tray.
Media did not arrive at the prefeed sensor (PS102) within the specified time.

13.02.00

- code :

13.02.00

- affichage :

13.JJ.NT JAM INSIDE TOP COVER AREA

- description :

Media is jammed in the top cover area.
Media is stopped under the topof- page sensor (PS103).

13.05.00

- code :

13.05.00

- affichage :

13.JJ.NT JAM INSIDE TOP COVER AREA

- description :

Media is jammed in the top cover area.
Media did not arrive at the fuserdelivery sensor (PS108) within the specified time.

13.09.00

- code :

13.09.00

- affichage :

13.JJ.NT JAM INSIDE TOP COVER AREA

- description :

Media is jammed in the top cover area.
Media is jammed under the reversing paper sensor (PS110).

13.12.07

- code :

13.12.07

- affichage :

13.JJ.NT JAM IN OUTPUT BIN

- description :

Media is jammed in the output bin.
Staple cartridge

13.12.08

- code :

13.12.08

- affichage :

13.JJ.NT JAM IN OUTPUT BIN

- description :

Media is jammed in the output bin.
Output bin paper-present sensor (media is stuck)

13.12.09

- code :

13.12.09

- affichage :

13.JJ.NT JAM IN OUTPUT BIN

- description :

Media is jammed in the output bin.
Output bin inlet sensor (media is stuck)

13.12.10

- code :

13.12.10

- affichage :

13.JJ.NT JAM IN OUTPUT BIN

- description :

Media is jammed in the output bin.
Output bin inlet sensor (media did not reach the sensor at the appropriate time)

13.12.11

- code :

13.12.11

- affichage :

13.JJ.NT JAM IN OUTPUT BIN

- description :

Media is jammed in the output bin.
Media is present in the output bin when the MFP is turned on.

13.13.00

- code :

13.13.00

- affichage :

13.JJ.NT JAM INSIDE DUPLEXER Remove duplexer from lower left

- description :

Media is stuck inside the duplexer.

13.20.00

- code :

13.20.00

- affichage :

13.JJ.NT JAM INSIDE TOP COVER AREA

- description :

Media is jammed in the top cover area.
The pre-feed sensor (PS102), the top-of-page sensor (PS103), or the fuser-delivery sensor (PS108) detected media inside the MFP when it was turned on.

13.21.00

- code :

13.21.00

- affichage :

13.JJ.NT JAM INSIDE TOP COVER AREA

- description :

Media is jammed in the top cover area.
The top cover was opened during printing, or the top-cover switch (SW101) is defective.

13.31.00

- code :

13.31.00

- affichage :

13.JJ.NT JAM INSIDE TOP COVER AREA

- description :

Media is jammed in the top cover area.
Media did not arrive at the reversing paper sensor (PS110) within the specified time.

13.33.00

- code :

13.33.00

- affichage :

13.JJ.NT JAM INSIDE TOP COVER AREA

- description :

Media is jammed in the top cover area.
Media did not arrive at the paper-delivery sensor (PS109) within the specified time.

13.JJ.NT

- code :

13.JJ.NT

- affichage :

13.JJ.NT PAPER JAM OPEN INPUT TRAYS

- description :

Media is jammed inside one or more of the trays.

20

- code :

20

- affichage :

20 INSUFFICIENT MEMORY - To Continue Touch OK

- description :

The MFP received more data than can fit in the available memory. You might have tried to transfer too many macros, soft fonts, or complex graphics.

21

- code :

21

- affichage :

21 PAGE TOO COMPLEX - To Continue Touch OK

- description :

The page formatting process was not fast enough for the MFP.

22

- code :

22

- affichage :

22 EMBEDDED I/O BUFFER OVERFLOW - To Continue Touch OK

- description :

Too much data was sent to the embedded HP Jetdirect print server.

30.1.1

- code :

30.1.1

- affichage :

30.1.YY SCANNER FAILURE

- description :

An error has occurred in the scanner.
The scanner cover is open.

30.1.10

- code :

30.1.10

- affichage :

30.1.YY SCANNER FAILURE

- description :

An error has occurred in the scanner.
An error has occurred at the ADF fan. (See the separate entry for this error.)

30.1.15

- code :

30.1.15

- affichage :

30.1.YY SCANNER FAILURE

- description :

An error has occurred in the scanner.
Scanner initialization failed.

30.1.18

- code :

30.1.18

- affichage :

30.1.YY SCANNER FAILURE

- description :

An error has occurred in the scanner.
An error occurred on the scanner PCA.

30.1.19

- code :

30.1.19

- affichage :

30.1.YY SCANNER FAILURE

- description :

An error has occurred in the scanner.
An error occurred at the scanner lamp.

30.1.2

- code :

30.1.2

- affichage :

30.1.YY SCANNER FAILURE

- description :

An error has occurred in the scanner.
A jam has occurred in the ADF.

30.1.22

- code :

30.1.22

- affichage :

30.1.YY SCANNER FAILURE

- description :

An error has occurred in the scanner.
A fatal hardware error has occurred in the scanner.

30.1.23

- code :

30.1.23

- affichage :

30.1.YY SCANNER FAILURE

- description :

An error has occurred in the scanner.
A scanner-calibration error has occurred.

30.1.24

- code :

30.1.24

- affichage :

30.1.YY SCANNER FAILURE

- description :

An error has occurred in the scanner.
The ADF jam-access door is open.

30.1.25

- code :

30.1.25

- affichage :

30.1.YY SCANNER FAILURE

- description :

An error has occurred in the scanner.
A general error has occurred in the scanner or ADF. This error is most likely a memory corruption.

30.1.29

- code :

30.1.29

- affichage :

30.1.YY SCANNER FAILURE

- description :

An error has occurred in the scanner.
The ADF output bin is full.

30.1.3

- code :

30.1.3

- affichage :

30.1.YY SCANNER FAILURE

- description :

An error has occurred in the scanner.
The ADF could not pick up the paper.

30.1.36

- code :

30.1.36

- affichage :

30.1.YY SCANNER FAILURE

- description :

An error has occurred in the scanner.
The scanning-firmware upgrade failed. The MFP automatically tries to upgrade the firmware again the next time the MFP is turned on.

30.1.6

- code :

30.1.6

- affichage :

30.1.YY SCANNER FAILURE

- description :

An error has occurred in the scanner.
An error has occurred at the scanner fan. (See the separate entry for this error.)

30.1.7

- code :

30.1.7

- affichage :

30.1.YY SCANNER FAILURE

- description :

An error has occurred in the scanner.
A communication error has occurred in the scanner.

30.1.8

- code :

30.1.8

- affichage :

30.1.YY SCANNER FAILURE

- description :

An error has occurred in the scanner.
A scanner-calibration error has occurred. (See the separate entry for this error.)

40

- code :

40

- affichage :

40 EMBEDDED I/O BAD TRANSMISSION - To Continue Touch OK

- description :

A temporary printing error has occurred.

41.2

- code :

41.2

- affichage :

41.<X> Error

- description :

A temporary printing error occurred.
Beam-detect misprint error

41.3

- code :

41.3

- affichage :

41.3 MEDIA TOO SHORT CANNOT SEND TO FACE DOWN OUTPUT BIN

- description :

The MFP cannot deliver the selected media face-down because the media does not meet the minimum length specification.

49.XXXXX

- code :

49.XXXXX

- affichage :

49.XXXXX ERROR - To Continue Turn Off Then On

- description :

A critical firmware error has occurred. This type of error can be caused by invalid print commands, corrupt data, or invalid operations. In some instances, electrical noise in the cable can corrupt data during transmission to the MFP. Other causes include poorquality parallel cables, poor connections, or specific software programs. Sometimes, the formatter itself is at fault, which is usually indicated by a 79.XXXX ERROR - To Continue Turn Off Then On message.

50.1

- code :

50.1

- affichage :

50.X FUSER ERROR

- description :

A fuser error has occurred.
Low fuser temp

50.2

- code :

50.2

- affichage :

50.X FUSER ERROR

- description :

A fuser error has occurred.
Fuser warm up service

50.3

- code :

50.3

- affichage :

50.X FUSER ERROR

- description :

A fuser error has occurred.
High fuser temp

50.4

- code :

50.4

- affichage :

50.X FUSER ERROR

- description :

A fuser error has occurred.
Faulty fuser

50.5

- code :

50.5

- affichage :

50.X FUSER ERROR

- description :

A fuser error has occurred.
Inconsistent fuser

51.10

- code :

51.10

- affichage :

51.XY ERROR - To Continue Turn Off Then On

- description :

A temporary printing error has occurred.
Beam detect error

51.20

- code :

51.20

- affichage :

51.XY ERROR - To Continue Turn Off Then On

- description :

A temporary printing error has occurred.
Laser error

52.0

- code :

52.0

- affichage :

52.XY ERROR - To Continue Turn Off Then On

- description :

A temporary printing error has occurred.
Scanner error

52.1

- code :

52.1

- affichage :

52.XY ERROR - To Continue Turn Off Then On

- description :

A temporary printing error has occurred.
Scanner startup error

52.2

- code :

52.2

- affichage :

52.XY ERROR - To Continue Turn Off Then On

- description :

A temporary printing error has occurred.
Scanner rotation error

53.10.01

- code :

53.10.01

- affichage :

53.10.0X - Error Unsupported DIMM

- description :

A memory error has occurred.
Unsupported memory/DIMM

54.01

- code :

54.01

- affichage :

54.<XX> Error

- description :

A sensor error has occurred.
Temperature

54.XX

- code :

54.XX

- affichage :

54.<XX> Error

- description :

A sensor-related error has occurred.

55.01.YY

- code :

55.01.YY

- affichage :

55.XX.YY DC CONTROLLER ERROR - To Continue Turn Off Then On

- description :

The print engine is not communicating with the formatter.
Incoming parity error

55.02.YY

- code :

55.02.YY

- affichage :

55.XX.YY DC CONTROLLER ERROR - To Continue Turn Off Then On

- description :

The print engine is not communicating with the formatter.
Outgoing parity error

55.04.YY

- code :

55.04.YY

- affichage :

55.XX.YY DC CONTROLLER ERROR - To Continue Turn Off Then On

- description :

The print engine is not communicating with the formatter.
Communications timeout

55.05

- code :

55.05

- affichage :

55.05 Error - To continue turn off then on

- description :

This Remote Firmware Upgrade (RFU) error message occurs when an upgrade on the firmware is being performed and something has happened that prevented the upgrade.

56.1

- code :

56.1

- affichage :

56.X ERROR - To Continue Turn Off Then On

- description :

The input device or output device is unknown.
Unknown input device

56.2

- code :

56.2

- affichage :

56.X ERROR - To Continue Turn Off Then On

- description :

The input device or output device is unknown.
Unknown output device

57.01

- code :

57.01

- affichage :

57.01 Error - To continue turn off then on

- description :

The DC controller fan (FN104) is not functioning.

57.03

- code :

57.03

- affichage :

57.03 Error - To continue turn off then on

- description :

The print-cartridge fan (FN102) is not functioning.

57.04

- code :

57.04

- affichage :

57.04 Error - To continue turn off then on

- description :

The main fan (FN101) is not functioning.

57.05

- code :

57.05

- affichage :

57.05 Error - To continue turn off then on

- description :

The duplexing-unit fan (FN107) is not functioning.

57.07

- code :

57.07

- affichage :

57.07 Error - To continue turn off then on

- description :

The reversing-unit fan (FN103) is not functioning.

58.2

- code :

58.2

- affichage :

58.XX ERROR - To Continue Turn Off Then On

- description :

A memory error has been detected.
Air temperature sensor (TH3)

58.3

- code :

58.3

- affichage :

58.XX ERROR - To Continue Turn Off Then On

- description :

A memory error has been detected.
DC controller PCA

58.4

- code :

58.4

- affichage :

58.XX ERROR - To Continue Turn Off Then On

- description :

A memory error has been detected.
Engine power supply

59.0

- code :

59.0

- affichage :

59.XY ERROR - To Continue Turn Off Then On

- description :

An error has occurred in one of the motors.
Main motor error

59.1

- code :

59.1

- affichage :

59.XY ERROR - To Continue Turn Off Then On

- description :

An error has occurred in one of the motors.
Main-motor startup errorr PCA.

59.2

- code :

59.2

- affichage :

59.XY ERROR - To Continue Turn Off Then On

- description :

An error has occurred in one of the motors.
Main-motor rotation error

59.4

- code :

59.4

- affichage :

59.XY ERROR - To Continue Turn Off Then On

- description :

An error has occurred in one of the motors.
Print-cartridge-motor error

59.A

- code :

59.A

- affichage :

59.XY ERROR - To Continue Turn Off Then On

- description :

An error has occurred in one of the motors.
Print-cartridge-motor error

60.XX

- code :

60.XX

- affichage :

60.XX ERROR - To Continue Turn Off Then On

- description :

The tray specified by X is not lifting correctly.

62

- code :

62

- affichage :

62 NO SYSTEM - To Continue Turn Off Then On

- description :

A problem exists with the MFP firmware.

64

- code :

64

- affichage :

64 ERROR - To Continue Turn Off Then On

- description :

A scan buffer error occurred.

65.12.99

- code :

65.12.99

- affichage :

65.12.99 Output accessory disconnected

- description :

An output accessory (stapler/stacker or 3– bin mailbox) is not connected properly.

66.00.15

- code :

66.00.15

- affichage :

66.XY.ZZ OUTPUT DEVICE FAILURE

- description :

An error occurred in an external paperhandling accessory.
The output device was removed and then replaced while the MFP power was on.

66.12.01

- code :

66.12.01

- affichage :

66.XY.ZZ OUTPUT DEVICE FAILURE

- description :

An error occurred in an external paperhandling accessory.
Output-lift roller or paddle-motor error

66.12.02

- code :

66.12.02

- affichage :

66.XY.ZZ OUTPUT DEVICE FAILURE

- description :

An error occurred in an external paperhandling accessory.
Jogger-motor error

66.12.03

- code :

66.12.03

- affichage :

66.XY.ZZ OUTPUT DEVICE FAILURE

- description :

An error occurred in an external paperhandling accessory.
Stapler motor error

68.0

- code :

68.0

- affichage :

68.X PERMANENT STORAGE FULL - To Continue Touch OK

- description :

The MFP NVRAM is full. Some settings saved in the NVRAM might have been reset to the factory defaults. Printing can continue, but some unexpected functions might occur if an error occurred in permanent storage.
Onboard-NVRAM failure

68.1

- code :

68.1

- affichage :

68.X PERMANENT STORAGE FULL - To Continue Touch OK

- description :

The MFP NVRAM is full. Some settings saved in the NVRAM might have been reset to the factory defaults. Printing can continue, but some unexpected functions might occur if an error occurred in permanent storage.
Memory-DIMM or hard-disk failure

68.X

- code :

68.X

- affichage :

68.X STORAGE ERROR SETTINGS CHANGED - To Continue Touch OK

- description :

One or more MFP settings are invalid and have been reset to the factory-default settings. Printing can continue, but some unexpected functions might occur if an error occurred in permanent storage.

69.X

- code :

69.X

- affichage :

69.X ERROR - To Continue Turn Off Then On

- description :

The duplex printing unit is not functioning.

79.XXXX

- code :

79.XXXX

- affichage :

79.XXXX ERROR - To Continue Turn Off Then On

- description :

A critical hardware error occurred.

8X.YYYY

- code :

8X.YYYY

- affichage :

8X.YYYY EMBEDDED JETDIRECT ERROR

- description :

The embedded HP Jetdirect print server has encountered a critical error.

Le problème provient probablement d'une pièce à remplacer.

Pièces d'usures remplacées frequemment sur la HP LaserJet M4345 MFP, M4345X, M4345XS, M4345XM

Nomenclature des pièces détachées de la HP LaserJet M4345 MFP, M4345X, M4345XS, M4345XM

RU5-0045-030CN18T GEAR
XA9-1500-000CN2.5ew, S, M3x8
Q7719-67951256MB MEMORY DIMM
Q5692-679013-Bin Mailbox-replacement unit
Q5692-605033-Bin Mailbox-replacement unit
Q5691-67901500 Sheet Stapler/Stacker Replcemnt unit
Q5691-60501500 Sheet Stapler/Stacker-replacmnt unit
PF2282-SVPNIADF
PF2282P060NIADF base
Q5997-67901-BUADF Maintenance Kit
RC1-2827-000CNARM, DOOR, 1
RC1-2828-000CNARM, DOOR, 2
Q3942-60102Assembly-Control Panel
RM1-1403-030CNAssembly-DC Controller
RM1-1403-050CNAssembly-DC Controller
RM1-1013-050CNAssembly-DC Power Supply PCB 100-127V
RM1-1014-060CNAssembly-DC Power Supply PCB 220-240V
RM1-1043-040CNAssembly-Fixing 110-127V
RM1-1044-040CNAssembly-Fixing 220-240V
RM1-0034-070CNAssembly-Paper Pick-up Drive
RM1-0036-020CNAssembly-Paper Pick-up Roller (Patin, galet d’entrainement)
RM1-0043-BULKAssembly-Swing Gear
RM1-0043-060CNAssembly-Swing Gear
RM1-0043-050CNAssembly-Swing Plate
PF2282K046NIASY-BAG-MLR
IR4041K121NIASY-CRG-HP
IR4041K111NIASY-CVR-UPPER
IR4041K081NIASY-FB-UNIT
PF2282K035NIASY-HLD-REV
PF2282K043NIASY-HLDR-R-MLR
PF2282K041NIASY-HNG-L
PF2282K008NIASY-HNG-R
PF2282K039NIASY-K-FEED
IR4041K102NIASY-LOCK-CRG
PF2282K040NIASY-SHUTTER
PF2282K042NIASY-TRY
RM1-1004-000CNBACK END LIMIT ASSY
RC1-2857-000CNBASE, TRAY
IR4041K107NIBelt and pulley sub assembly
NS-BLT00290NIBELTST1110060
RC1-3102-000CNBLOCK, GUIDE SUPPORT, UPPER
RM1-1372-000CNBM. DT. SCANNER JOINT CABLE
WS9-0255-000CNBOLT, HEX HEAD
IR4041P215NIBreak-away cover
RC1-2759-000CNBUSHING
RC1-2789-000CNBUSHING
RB1-8934-000CNBUSHING
RC1-3044-000CNBUTTON, SWITCH
PF2282K165NICable - ADF to SCB
RM1-1193-000CNCable, Envelope Feeder Connector
RK2-0469-000CNCABLE, FLAT 1
RK2-0470-000CNCABLE, FLAT 2
RM1-1385-000CNCABLE, INTERFACE, LOWER
RM1-1384-000CNCABLE, INTERFACE, UPPER
5851-1827Cable-Disk Drive-250mm
RM1-1357-000CNCable-PCB Ribbon
Q3701-60103CA-MFP Analog 300 Fax
IR4041P214NICarriage lock skin
Q7829-67921CARTOUCHE, TONER STAPLER/STACKER
C8085-60541cartouche, toner, Stapler/stacker, (C8091A)
RC1-0245-000CNCASE, ENVELOPE
RM1-1001-040CNCassette
RM1-1011-000CNCASSETTE RAIL ASSY, LEFT
RM1-1012-000CNCASSETTE RAIL ASSY, RIGHT
RM1-1001-000CNCASSETTE
Q3942-60133CD-Service/Support LJ 4345 MFP Printer
RK2-0349-000CNCLUTCH, ELECTROMAGNETIC
RC1-3224-000CNCOVER NUMBER PLATE MOUNT
RC1-3043-000CNCOVER, CASSETTE, LEFT
RL1-0457-000CNCOVER, CORNER, FRONT
RC1-2833-000CNCOVER, DOOR ARM
RL1-0455-000CNCOVER, ENVIRONMENT
RC1-3035-000CNCOVER, FORMATTER
RC1-3196-000CNCOVER, FRONT
RC1-3039-000CNCOVER, FRONT
RC1-2881-000CNCOVER, HANDLE, RIGHT LOWER
RC1-3041-000CNCOVER, INNER, FRONT
RC1-3199-000CNCOVER, LEFT
RC1-3200-000CNCOVER, LEFT UPPER
RC1-2820-000CNCOVER, LOCK, FRONT
RC1-2821-000CNCOVER, LOCK, REAR
RC1-3221-000CNCOVER, NUMBER PLATE MOUNT
RC1-3197-000CNCOVER, REAR
RC1-3040-000CNCOVER, REAR
RC1-3198-000CNCOVER, RIGHT
RC1-3052-000CNCOVER, SIDE, FRONT
RC1-3042-000CNCOVER, SIDE, REAR
RC1-2823-000CNCOVER, STOPPER, FRONT
RC1-2911-000CNCROSSMEMBER, IS SUPPORT
PF2282P059NICVR-F
IR4041P217NICVR-FAN
PF2282P041NICVR-K
PF2282P058NICVR-L
PF2282P044NICVR-R
IR4041P216NICVR-REAR
RM1-1354-000CNDC CONTROLLER ASSY
RM1-1403-000CNDC CONTROLLER ASSY
RM1-1403-060CNDC CONTROLLER ASSY
RM1-1014-050CNDC POWER SUPPLY PCB 220V
RM1-1014-020CNDC POWER SUPPLY PCB ASSY 220-240V
RM1-1371-000CNDELIVERY UNIT CONNECT CABLE
Q7719AXDIMM-256MB 100pin DDR DIMM RoHS
RM1-1397-000CNDOOR SWITCH CABLE
RC1-2597-000CNDoor-Jam access
RM1-0981-000CNDoor-Jam access
RM1-1018-000CNDUPLEXING COVER ASSY
RM1-1400-000CNDUPLEXING GROUNDING CABLE
RM1-1042-040CNENGINE POWER SUPPLY ASSY
RM1-1046-020CNFACE UP GUIDE OPEN ASSY
RK2-0472-000CNFAN
RM1-1376-020CNFAN DOCKING CABLE
RM1-1376-000CNFAN DOCKING CABLE
RK2-0280-000CNFan, Cooling, Right side
IR4041P521NIFAN-2410ML-05WB39C20
RM1-1043-000CNFUSER KIT (FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE) 110-127V
RM1-1044-000CNFUSER KIT (FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE) 220-240V
RC1-0462-000CNFLAG, FULL DETECT
RC1-3205-000CNFLAG, JAM SENSOR
RC1-2799-000CNFLAG, PAPER SENSING
RC1-0378-000CNFLAG, SHUTTER
RM1-1027-000CNFLEXIBLE FLAT C. GUIDE ASSY
IR4041P007NIFLTR-FAN
Q3942-69001FORMATTER ASSEMBLY
RM1-1015-000CNFRONT COVER ASSY
RL1-0462-020CNFULL DETECT FLAG
RM1-1368-000CNFULL SENSOR CABLE
RM1-1043-080CN FUSER KIT (FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE 110V
RM1-1043-BULK FUSER KIT (FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE 110V
RM1-1044-080CNFUSER 220-240V
RM1-1574-000CNGAS DAMPER FRONT ASSY
RM1-1575-000CNGAS DAMPER REAR ASSY
RU5-0254-000CNGEAR, 14T
RC1-0331-000CNGEAR, 20T
RU5-0256-000CNGEAR, 23T
RU5-0050-000CNGear, 30T
RU5-0253-000CNGEAR, 80T
RU5-0045-020CNGear-18 tooth
PF2282P025NIGID-R-WHT
RC1-2853-000CNGUIDE, CARTOUCHE, TONER, UPPER
RC1-3020-000CNGUIDE, CASSETTE, FRONT
RC1-2854-000CNGUIDE, LEGAL
RC1-3371-020CNGUIDE, PAPER RE-PICK UP
RM1-1010-000CNGUIDE, PAPER SENSING
RC1-2884-000CNGUIDE, REAR
Q3942-90962Guide-User Print-on-Demand CS
Q3942-90958Guide-User Print-on-Demand DA
Q3942-90954Guide-User Print-on-Demand DE
Q3942-90951Guide-User Print-on-Demand EN
Q3942-90955Guide-User Print-on-Demand ES
Q3942-90961Guide-User Print-on-Demand FI
Q3942-90952Guide-User Print-on-Demand FR
Q3942-90963Guide-User Print-on-Demand HU
Q3942-90953Guide-User Print-on-Demand IT
Q3942-90969Guide-User Print-on-Demand KO
Q3942-90956Guide-User Print-on-Demand NL
Q3942-90960Guide-User Print-on-Demand NO
Q3942-90964Guide-User Print-on-Demand PL
Q3942-90959Guide-User Print-on-Demand PT
Q3942-90965Guide-User Print-on-Demand RU
Q3942-90957Guide-User Print-on-Demand SV
Q3942-90966Guide-User Print-on-Demand TR
Q3942-90967Guide-User Print-on-Demand ZHCN
Q3942-90968Guide-User Print-on-Demand ZHTW
RC1-2818-000CNHANDLE, LOCK
Q7829-67925HCI FEED ROLLER (PATIN, GALET D’ENTRAINEMENT) (BLUE)
Q7829-67925-5HCI FEED ROLLER (PATIN, GALET D’ENTRAINEMENT) (BLUE)
RC1-2901-000CNHINGE, RIGHT DOOR
RC1-3063-000CNHOLDER, DOOR SWITCH
RC1-2864-000CNHOLDER, FULL DETECT FLAG
RC1-3002-000CNHOLDER, LINK
RC1-2855-000CNHOLDER, SHUTTER, RIGHT
Q5692AHP 3 bin mailbox
Q5691AHP 500-sheet stapler/stacker
Q2438-67902HP 75-Sheet Envelope Feeder
Q5968AHP LaserJet 4345 mfp 500-Bac à papier
Q5997AHP LaserJet 4345 mfp ADF Maintenance Kit
Q6496AHP LaserJet 4345 mfp ADF mylar sheets
Q5969AHP LaserJet 4345 mfp duplexer
Q3942AHP LaserJet 4345 mfp Printer
Q5998AHP LaserJet 4345mfp 110v maintenance kit
Q5999AHP LaserJet 4345mfp 220v maintenance kit
RM1-1398-000CNIMAGE SCANNER CABLE
IR4041P522NIINV-PXZ160I1-B
PF2282K164NIJam cover handle assembly
RM1-1454-000CNJAM SENSOR ASSY
5851-4076Kit - Paper Feed Assy
Q3942-69011Kit- Formatter Assy RoHS
Q3942-60125Kit-Control Pnl Overlay Left/Right AR
Q3942-60116Kit-Control Pnl Overlay Left/Right CS
Q3942-60113Kit-Control Pnl Overlay Left/Right DA
Q3942-60106Kit-Control Pnl Overlay Left/Right DE
Q3942-60124Kit-Control Pnl Overlay Left/Right EL
Q3942-60103Kit-Control Pnl Overlay Left/Right EN
Q3942-60107Kit-Control Pnl Overlay Left/Right ES
Q3942-60112Kit-Control Pnl Overlay Left/Right FI
Q3942-60104Kit-Control Pnl Overlay Left/Right FR
Q3942-60123Kit-Control Pnl Overlay Left/Right HE
Q3942-60117Kit-Control Pnl Overlay Left/Right HU
Q3942-60105Kit-Control Pnl Overlay Left/Right IT
Q3942-60121Kit-Control Pnl Overlay Left/Right JA
Q3942-60120Kit-Control Pnl Overlay Left/Right KO
Q3942-60108Kit-Control Pnl Overlay Left/Right NL
Q3942-60110Kit-Control Pnl Overlay Left/Right NO
Q3942-60114Kit-Control Pnl Overlay Left/Right PL
Q3942-60109Kit-Control Pnl Overlay Left/Right PT
Q3942-60115Kit-Control Pnl Overlay Left/Right RU
Q3942-60111Kit-Control Pnl Overlay Left/Right SV
Q3942-60132Kit-Control Pnl Overlay Left/Right TH
Q3942-60122Kit-Control Pnl Overlay Left/Right TR
Q3942-60119Kit-Control Pnl Overlay Left/Right ZHCN
Q3942-60118Kit-Control Pnl Overlay Left/Right ZHTW
Q2627-67951Kit-DIMM AX
Q3942-69009Kit-Formatter Replacement Assy RoHS
CB425-69003Kit-LJ M4345 220v Fuser
CB425-69004Kit-LJ M4345 220v Fuser APJ
Q5998-67904Kit-Preventative Maintenance 110V
Q5999-67904Kit-Preventative Maintenance 220V
5851-3941Kit-Roller (Patin, galet d’entrainement)
5851-2766Kit-Swing Plate/Pressure Roller (Patin, galet d’entrainement) Gear
IR4041K151NILamp assembly
RM1-1367-000CNLASER CABLE
RM1-1573-040CNLASER SCANNER ASSY
IR4041K114NILeft skin
RC1-3106-000CNLEVER, SHUTTER
RC1-2782-000CNLEVER, SIZE SENSING
RM1-1457-050CNLIFTER DRIVE ASSY
RM1-1029-000CNLIFTER DRIVE ASSY
RM1-1029-040CNLIFTER DRIVE ASSY
RC1-2758-000CNLIMITTER, TORQUE
RC1-2822-000CNLINK, HANDLE
RC1-3003-000CNLINK, SWITCH
Q5998-67903-BULJ 4345 MFP 110V MAINT. KIT
Q2635EALJ4345 MFP FLASH DIMM
Q2635EBLJ4345 MFP FLASH DIMMV09.011.5
Q7725-67988LJ4345 MFP Flash Memory Card-32MB
Q7725-67992LJ4345 MFP Flash Memory Card-32MB
Q2635-67924LJ4345 MFP Flsh Memry Card-32MB 09.011.5
Q2635-67926LJ4345 MFP Flsh Memry Card-32MB 09.022.1
Q2635EDLJ4345 MFP Flsh Memry Card-32MB 09.031.8
Q7725EDLJ4345 MFP Flsh Memry Card-32MB 09.031.8
Q2635-67937LJ4345 MFP Flsh Memry Card-32MB 09.031.8
Q7725-67906LJ4345 MFP Flsh Memry Card-32MB 09.031.8
Q2635EELJ4345 MFP Flsh Memry Card-32MB 09.041.8
Q7725-67915LJ4345 MFP Flsh Memry Card-32MB 09.041.8
Q7725EELJ4345 MFP FW DIMM V09.041.8
Q7725EJLJ4345 MFP FW DIMM V09.062.0
Q7725EHLJ4345 MFP FW DIMM V09.062.0
Q7725-67978LJ4345 MFP FW DIMM V09.071.8
Q7725-67972LJ4345 MFP FW DIMM V09.071.8
Q2635-67943LJ4345 MFP FW DIMM V.09.041.8
Q7725-67947LJ4345 MFP FW DIMM V09.051.7
Q5998-67904-BULJ4345MFP 110V MAINTENENCE KIT
Q5998-67903LJ4345MFP 110V MAINTENENCE KIT
Q5999-67904BULK84LJ4345MFP 220V MAINT. KIT
Q5999-67903LJ4345MFP 220V MAINTENANCE KIT
PF2282-SVPNRLJ4345MFP ADF ASSEMBLY
PF2282K006NILJ4345MFP ADFASSY
Q3942-60140LJ4345MFP CONTROL PANEL
Q7725EFLJ4345MFP Flash Memry Card-32MB 09.051.6
Q7725-67929LJ4345MFP Flash Memry Card-32MB 09.051.6
Q7725EGLJ4345MFP Flash Memry Card-32MB 09.051.7
Q7725-67941LJ4345MFP Flash Memry Card-32MB 09.051.7
Q7725-67965LJ4345MFP Flash Memry Card-32MB 09.081.6
Q7725-67952LJ4345MFP Flash Memry Card-32MB xx.xxx.x
Q7725-67981LJ4345MFP Flsh Memry Card-32MB
Q7725-67996LJ4345MFP Flsh Memry Card-32MB 09.180.9
IR4041-SVPNILJ4345MFP SCANNER ASSEMBLY
IR4041-SVPNRLJ4345MFP SCANNER ASSY
Q3942A #ABALJ4345MFP UNIT
Q3942A #ABBLJ4345MFP UNIT 220V
Q3943A #ABALJ4345XMFP UNIT
XB4-7300-809CNM3X8 TAP SCREW
RM1-1049-000CNMAIN DRIVE ASSY
Q3942-90950Manual-Service
PF2282P353NIMLR-K-UP
IR4041K520NIMOT-17PMJ303P3VS-ASY
RK2-0275-000CNMOTOR, EP
RK2-0272-000CNMotor, EP
RK2-0273-000CNMOTOR, MAIN
RK2-0274-000CNMotor, Main
RK2-0473-000CNMOTOR, STEPPING
RK2-0474-000CNMOTOR, STEPPING
RK2-0475-000CNMOTOR, STEPPING
RL1-0019BULKMMP PICKUP ROLLER (PATIN, GALET D’ENTRAINEMENT)
PF2282K166NIMud flap assembly
RM1-1567-000CNMULTI PURPOSE TRAY ASSY
RM1-1572-040CNMULTI-PURPOSE ASSY
PF2288K050NI-5Mylar Kit
PF2288K050NIMylar Kit
Q6496-67901-BUMYLAR KIT
RM1-1456-000CNNUMBER DISPLAY ASSY
IR4041K121NROPTICAL ASSEMBLY
RM1-1370-000CNOPTION FEEDER CABLE
Q2635ECORDER Q2635ED
RM1-1047-000CNOutput Tray Assy
RM1-1381-020CNPANEL CABLE
RM1-1381-000CNPANEL CABLE
RM1-0940-000CNPAPER DELIVERY TRAY ASSY
RM1-0025-040CNPaper Feed Assy (110V and 220V)
RM1-0037-020CNPAPER FEED ROLLER (PATIN, GALET D’ENTRAINEMENT) ASSY
RC1-0060-050CNPaper Feed Sensor Flag
RM1-1455-000CNPAPER SENSING ASSY
RM1-1002-000CNPAPER SIDE END ASSY, FRONT
RM1-1003-000CNPAPER SIDE END ASSY, RIGHT
PF2282P061NIPaper stop
Q3701-60004PCA - FAX MODEM CARD
Q6517-60001PCA- MFP Analog 300 RoHS Fax
RM1-1122-000CNPCA, Paper Feeder Assy
Q3701-60002PCA-Fax Modem Card 300 REV A
Q3701-60021PCA-MFP ANALOG 300 ROHS FAX
Q3701-60012PCA-MFP Analog 300 RoHS Fax 2.35i
Q3701-60014PCA-MFP Analog 300 RoHS Fax 2.35u
Q3701-60010PCA-MFP Analog 300 RoHS Fax
Q3701-60020PCA-MFP Analog 300 RoHS Fax
PHA000151Pharos PC Prox Plus Card Reader
PHA00111Pharos PS60 501+ License
8121-0811PHN-CORD OPT-501 US 3.0-M-LG ROHS
8120-8344PHN-CORD OPT-501 US 3.0-M-LG ROHS
8120-8912PHN-CORD OPT-502 DE 3.0-M-LG ROHS
8120-8923PHN-CORD OPT-504 FR 3.0-M-LG ROHS
8120-8921PHN-CORD OPT-505 UK/HK/NZ 3.0-M-LG ROHS
8120-8911PHN-CORD OPT-506 DK 3.0-M-LG ROHS
8120-8920PHN-CORD OPT-507 TR 3.0-M-LG ROHS
8120-8915PHN-CORD OPT-508 NL 3.0-M-LG ROHS
8120-8916PHN-CORD OPT-510 NO/FI 3.0-M-LG ROHS
8120-8919PHN-CORD OPT-512 CH 3.0-M-LG ROHS
8121-0844PHN-CORD OPT-512 CH 3.0-M-LG ROHS
8120-8914PHN-CORD OPT-514 IT 3.0-M-LG ROHS
8120-8908PHN-CORD OPT-516 KR 3.0-M-LG ROHS
8120-8917PHN-CORD OPT-518 ZA 3.0-M-LG ROHS
8120-8922PHN-CORD OPT-520 EE 3.0-M-LG ROHS
C6735-80001Phone Cable for Ireland, Port and Spain
WG8-5849-000CNPhoto-Interrupter
WG8-5624-000CNPhoto-Interrupter
PF2282P039NIPICK UP GEAR
RM1-1375-000CNPOWER CABLE
RM1-1041-040CNPOWER SUPPLY ASSY 110V
RM1-1042-000CNPOWER SUPPLY ASSY 220V
8120-8706PWR-CORD OPT-900 3-COND 2.3-M-LG 10 ROHS
8120-6812PWR-CORD OPT-903 3-COND 2.3-M-LG ROHS
8120-6815PWR-CORD OPT-906 3-COND 2.25-M-LG ROHS
8120-6814PWR-CORD OPT-912 3-COND 2.25-M-LG ROHS
8120-6813PWR-CORD OPT-917 3-COND 2.25-M-LG ROHS
8120-6798PWR-CORD OPT-918 3-COND 2.3-M-LG ROHS
8120-6869PWR-CORD OPT-920 3-CON 2.3-M-LG ROHS
8120-6980PWR-CORD OPT-921 3-COND 2.3-M-LG ROHS
8120-8707PWR-CORD OPT-922 3-COND 2.3-M-LG ROHS
8121-0964PWR-CORD OPT-934 3-COND 1.9-M-LG ROHS
5851-3350QUICK REFERENCE GUIDE MONO
RC1-2858-000CNRAIL, FRONT
RC1-2859-000CNRAIL, REAR
RM1-1017-000CNREAR COVER ASSY
RM1-1098-030CNREGISTRATION ASSEMBLY
Q5997-67901-5Replacement- ADF Maintenance Ki
Q5997-67901Replacement- ADF Maintenance Kit
Q6496-67901Replacement- Mylar Kit
Q3942-67902Replacement-110v Engine
Q5998-67901Replacement-110V Maintenance Kit
Q5998-67902Replacement-110V Maintenance Kit
Q3942-67903Replacement-220v Engine
Q5999-67902Replacement-220V Maintenance Kit
Q5999-67901Replacement-220v Printer Main Kit
Q5968-67901Replacement-500 Bac à papier
Q2635-67907Replacement-Card Q2635EA
Q5969-67901Replacement-Duplexer
Q3942-67901Replacement-Formatter Assembly
Q5945-67901Replacement-Toner
RM1-1019-000CNREV. ENTRANGEMENT GUIDE ASSY
RM1-1022-000CNREVERSE ASSY
RM1-1380-000CNREVERSE CABLE, 2
RM1-1025-000CNREVERSE LEFT CROSSMEMBER
RM1-1379-000CNREVERSE PCB ASSY
RM1-1016-000CNRIGHT COVER ASSY
RM1-1045-000CNRIGHT DOOR SENSOR ASSY
RM1-1033-000CNRIGHT LOWER COVER ASSY
IR4041P213NIRight skin
XD9-0234-000CNRing, E
RC1-2830-000CNROD, LINK
RC1-2902-000CNROD, LINK
RC1-2980-000CNROD, SWITCH, FRONT
J7948-61011ROHS HDD HDI SMO Kit
J7948-61031ROHS HDD HDI SMO KIT
J7948-61021ROHS HDD HDI SMO Kit
RL1-0019-000CNRoller (Patin, galet d’entrainement) - MP Tray Pick-up
RL1-0019-BULKROLLER (PATIN, GALET D’ENTRAINEMENT), FEED
RB1-8923-020CNROLLER (PATIN, GALET D’ENTRAINEMENT), PAPER FEED
RM1-0012-020CNRoller (Patin, galet d’entrainement), Paper Feed Assy
RM1-1110-000CNRoller (Patin, galet d’entrainement), Transfer
RM1-1573-020CNSCANNER ASSY
IR4041K512NRSCANNER CONTROLLER BOARD
030040FNITNISCR-030-040NIT
030080FWWSNISCR03M080-WS-W
040100FNBBNISCR-040-100NBB
040300FNWSNISCR-040-300NWS
IR4041P021NISCR-BTN-M3X8
NS-SCR00206NIScrew
030080FDBBNIScrew
NS-SCR00027NISCREW M3X10
XA9-1495-000CNSCREW RS M3X6
NS-SCR00056NISCREW TAP M4X10
XA9-1420-000CNSCREW W/WASHER, M3X8
XA9-1464-000CNSCREW, FLAT HEAD RS, M3X6
XA9-0650-000CNSCREW, M3X8
XA9-1447-000CNSCREW, RS, M3X12
XA9-1449-000CNSCREW, RS, M3X8
RS1-9004-020CNSCREW, STEPPED
XA9-1503-010CNSCREW, TAPPING., M3X6
XB6-7300-406CNSCREW, TP, M3X4
XB2-7300-607CNSCREW, W/WASHER, M3X6
RC1-0266-020CNSCREW,STEPPED,M3
XB4-7401-605CNSCREW,TAPPING,TRUSS HEAD,M4X16
E314000619NRSensor
RM1-1064-000CNSENSOR CABLE ASSEMBLY
RM1-1570-000CNSENSOR UNIT, REVERSE
RM1-1571-000CNSENSOR UNIT, REVERSE RETENTION
IR4041K105NISensors holder assembly
RL1-0007-000CNSeparation Pad
PF2282P339NISHT-B-SPONG
RM1-0041-020CNSIZE SENSING ASSY
J7948-61001SMO KIT, HDD, HDI
RK2-0485-000CNSOLENOID 105
RK2-0486-000CNSOLENOID 106
RK2-0269-000CNSolenoid, 500 Sht Tray
RK2-0276-000CNSolenoid, Tray 1
RC1-0392-000CNSPACER, SCREW
PF2282P352NISP-B-CVR-L
IR4041P041NISpring for Right skin
RU5-2265-000CNSPRING, COMPRESSION
RU5-2251-000CNSPRING, GROUNDING
RC1-0167-000CNSPRING, TENSION
RC1-0379-000CNSPRING, TORSION
RC1-0061-000CNSpring, Torsion
PF2282P343NISP-R-WHT
RC1-3090-000CNSTOPPER, BUSHING ARM
RC1-3124-000CNSTOPPER, HINGE SHAFT
RL1-0434-000CNSTOPPER, LOCK, FRONT
RC1-2856-000CNSUPPORT, CARTOUCHE, TONER
RL1-0436-000CNSUPPORT, GAS DAMPER
RM1-0043-020CNSwing Plate Assy
WC4-5139-000CNSWITCH, EP ACCES
XB4-7401-005CNTapping screw Truss Head M4x10
RM1-8438-000CNThermistor
RK2-0359-000CNThermistor
E314000619NITLP1241(C5)
RM1-1110-BULKTRANSFER ROLLER (PATIN, GALET D’ENTRAINEMENT)
PF2282K034NIUpper paper path assembly
Q3500-80001US Phone Cord

Caractéristiques techniques

HP LaserJet M4345 MFP, M4345X, M4345XS, M4345XM

Vitesse noir43 ppm
Bac à papier500 feuilles
Ref toner noirQ5945A
Capacité toner noir18000 pages