Printer image

Votre imprimante laser HP Color LaserJet CP6015, CP6015N, CP6015DN, CP6015XH
est en panne ?

Notre technicien peut intervenir sur site
pour la dépanner.

Nos spécialistes sont en mesure de prendre en charge toutes les pannes :

Indiquez-nous la panne rencontrée pour obtenir un diagnostic.

  • Défauts d’impression (traces, points, traits...)
  • Bourrages papier (départ papier, feuille froissée en accordéon...)
  • Message ou code erreur
  • Fuite de toner
  • Bruit anormal
  • Panne électronique
  • Paramétrage
  • Accessoire
  • Pièce détachée
  • Machine complète

... ou le code erreur qui s'affiche sur l'écran de votre imprimante.

Codes erreur rencontrés fréquemment sur l'imprimante
HP Color LaserJet CP6015, CP6015N, CP6015DN, CP6015XH

Le code affiché sur votre imprimante est plus long que celui indiqué dans cette liste.
Par exemple si l'écran de l'imprimante indique un code 13.00.02, nous ne retenons que le début du code, c'est à dire 13.
Le code 13 renvoie à un type de problème, les chiffres qui suivent pouvant apporter une précision.

printer-icon

Code erreur 10 : Problème de mémoire consommable, puce HS


Code erreur 13 : Bourrage papier


Code erreur 41 : Format de papier inattendu


Code erreur 49 : Format de fichier incorrect (pdf ou autre) ou pb de firmware


Code erreur 50 ou Erreur Station fusion ou Remplacer kit de maintenance : Problème de four (kit de maintenance)


Code erreur 51 : Panne de moteur laser


Code erreur 57 : Panne de ventilateur


Code erreur 59 : Panne de moteur


Tableau de tous les codes erreur de la HP Color LaserJet CP6015, CP6015N, CP6015DN, CP6015XH

10.32.00

- code :

10.32.00

- affichage :

10.32.00 Unauthorized Supply

- description :

An unauthorized print cartridge has been installed.

10.90.XY

- code :

10.90.XY

- affichage :

10.90.XY REPLACE <COLOR> CARTRIDGE

- description :

A toner replenishment malfunction has occurred.

10.91.00

- code :

10.91.00

- affichage :

10.91.00 PRINT CARTRIDGE ERROR

- description :

There is an error with the black-toner feed motor.

10.91.09

- code :

10.91.09

- affichage :

10.91.09 PRINT CARTRIDGE ERROR

- description :

There is an error with the color-toner feed motor.

10.XX.YY

- code :

10.XX.YY

- affichage :

10.XX.YY SUPPLY MEMORY ERROR

- description :

The product cannot read or write to at least one image drum. 10.10.00-10.10.03 = Missing e-label on print cartridge 10.10.05-10.10.08 = Missing e-label on image drum 10.00.00-10.00.03 = Defective e-label on print cartridge 10.00.05-10.00.08 = Defective e-label on image drum

11.XX

- code :

11.XX

- affichage :

11.XX Internal clock error

- description :

The product real time clock has experienced an error.

13.12.11

- code :

13.12.11

- affichage :

13.12.11

- description :

Finisher stay jam at either PI33 or PI34 when engine powered on. When the engine is powered on, the finisher's upper-feed-path-entry sensor (PI33) or the upper-feed-path-exit sensor (PI34) is activated suggesting that there is paper in the upper paper path of the finisher at sensors PI33 or PI34.

13.12.12

- code :

13.12.12

- affichage :

13.12.12

- description :

Finisher delay jam at PI33. The engine signals the finisher that paper is about to enter the finisher from the IPTU. The finisher's upper-feed-path-entry sensor (PI33), which detects paper entering the finisher, does not detect the paper within the expected time period triggering the error.

13.12.13

- code :

13.12.13

- affichage :

13.12.13

- description :

Finisher stay jam at PI33. Finisher's upper-feed-path-entry sensor (PI33) is remaining activated longer than expected, suggesting that paper has jammed at the sensor.

13.12.14

- code :

13.12.14

- affichage :

13.12.14

- description :

Finisher delay jam at PI34. Upper-paper-path-entry sensor (PI33) has signaled that paper has passed but upperpaper- path exit sensor PI34 does not actuate within the expected time, suggesting that the paper has jammed between PI33 and PI34 in the upper paper path.

13.12.15

- code :

13.12.15

- affichage :

13.12.15

- description :

Finisher stay jam at PI34 Finisher's upper-paper-path-exit sensor (PI34) remains activated longer than expected suggesting that paper has jammed at the sensor.

13.12.16

- code :

13.12.16

- affichage :

13.12.16

- description :

Finisher jam: door opened during staple/ stacking operation While the machine is printing, upper-door (open/close) sensor (PI31) or front-door (open/close) sensor (PI32) or the front-door (open/close) switch (MSW31) has signaled that one of the doors has been opened, suggesting that there may now be paper found in the upper paper path.

13.12.17

- code :

13.12.17

- affichage :

13.12.17

- description :

Engine to finisher timing jam: unexpected arrival of paper to finisher Upper-paper-path entry sensor (PI33) has detected paper before a signal from the engine has been received, indicating that paper is being delivered from the IPTU to the finisher.

13.12.21

- code :

13.12.21

- affichage :

13.12.21

- description :

Finisher upper stapler (stapler 1) staple jam. When the staple motor (M41) is rotated forward, the staple home-position sensor (PI5) does not turn back on after the prescribed time has elapsed after it goes off, and the staple home-position sensor (PI50) turns on within the prescribed time after the staple motor (M41) is rotated backwards.

13.12.41

- code :

13.12.41

- affichage :

13.12.41

- description :

Finisher: Paper detected in the bookletmaking portion of the finisher at engine power on. Occurs when paper is detected by one of the sensors on the paper-sensor board (PI18, PI19, PI20), vertical-path-paper sensor (PI17), booklet-delivery sensor (PI11), paperpositioning- plate-paper sensor (PI8), or booklet-making paper-entry sensor (PI22) when engine is turned on.

13.12.42

- code :

13.12.42

- affichage :

13.12.42

- description :

Finisher delay jam at booklet-making paperentry sensor (PI22) Occurs when booklet making function is selected and after the engine signals the finisher that it is delivering paper to the finisher. The booklet-making-paper entry sensor (PI22) is not activated within the expected time period after receiving the engine's delivery signal, suggesting that a paper jam has occurred somewhere between the output accessory bridge (IPTU) and sensor PI22.

13.12.43

- code :

13.12.43

- affichage :

13.12.43

- description :

Finisher stay jam at booklet-making paper entry sensor (PI22) Occurs when the booklet-making paper entry sensor (PI22) remains activated longer than expected, suggesting that there is a paper jam at the sensor.

13.12.44

- code :

13.12.44

- affichage :

13.12.44

- description :

Finisher delay jam at booklet making first paper sensor (PI18) Occurs when the first-paper sensor (PI18) is not activated within the expected time following the activation of the bookletmaking- paper entry sensor (PI22), suggesting that there is a paper jam in the area between PI22 and PI18.

13.12.45

- code :

13.12.45

- affichage :

13.12.45

- description :

Finisher stay jam at booklet making first paper sensor (PI18), flapper-1 paper sensor (PI19) or flapper-2 paper sensor (PI20) Occurs when PI18, PI19 or PI20 remain activated longer than expected, suggesting that there is a paper jam in the flapper 1 and 2 area of the booklet-maker section of the finisher.

13.12.46

- code :

13.12.46

- affichage :

13.12.46

- description :

Finisher jam: door was opened during booklet-making operation. Occurs while the machine is booklet making and the booklet delivery door sensor (PI3) or the booklet paper path open/close sensor (PI3) detects that the door or paper path has been opened. Also occurs when the finisher's front-door sensor (PI32) has been opened with paper remaining in the processing tray of the main stapler while the finisher is not operating.

13.12.51

- code :

13.12.51

- affichage :

13.12.51

- description :

Finisher jam: rear booklet stapler (SW5) When the rear-staple motor (M6) is rotated forward, the staple-home-position sensor (SW5) does not turn back on after the prescribed time has elapsed after it goes off (0.4 seconds).

13.12.52

- code :

13.12.52

- affichage :

13.12.52

- description :

Finisher jam: front-booklet stapler (SW7) When the rear-staple motor (M7) is rotated forward, the staple home-position sensor (SW7) does not turn back on after the prescribed time has elapsed after it goes off (0.4 seconds).

13.12.61

- code :

13.12.61

- affichage :

13.12.61

- description :

Finisher delay jam at the booklet-delivery sensor (PI11) Occurs when the folded booklet exits the folding rollers and does not reach the bookletdelivery sensor (PI11) within the expected time.

13.12.62

- code :

13.12.62

- affichage :

13.12.62

- description :

Finisher stay jam at the booklet-delivery sensor (PI11) or the vertical-paper-path sensor (PI17) Occurs when the booklet-delivery sensor (PI11) remains activated longer than expected after sensing the arrival of the new booklet from the folding rollers. Also occurs when the vertical-paper-path sensor (PI17) remains activated longer than expected after the paper has already passed through the folding rollers and is now detected by the booklet-delivery sensor (PI11).

13.12.XX

- code :

13.12.XX

- affichage :

13.12.XX JAM IN LEFT ACCESSORY

- description :

There is a paper jam in the output accessory.

13.JJ.NT

- code :

13.JJ.NT

- affichage :

13.JJ.NT TRANSFER AREA JAM

- description :

A jam has occurred inside the right door in the image transfer area.

20

- code :

20

- affichage :

20 INSUFFICIENT MEMORY

- description :

The product received more data than can fit in the available memory. You might have tried to transfer too many macros, soft fonts, or complex graphics.

22

- code :

22

- affichage :

22 USB I/O BUFFER OVERFLOW

- description :

The product's USB buffer has overflowed.

40

- code :

40

- affichage :

40 EMBEDDED I/O BAD TRANSMISSION

- description :

A temporary printing error has occurred.

41.3

- code :

41.3

- affichage :

41.3 UNEXPECTED SIZE IN TRAY <XX>

- description :

The product detected a different paper size than expected.

41.5

- code :

41.5

- affichage :

41.5 UNEXPECTED TYPE IN TRAY <XX>

- description :

The product detected a different paper type than expected.

41.7

- code :

41.7

- affichage :

41.7 ERROR

- description :

Paper was late arriving at the registration area and almost caused a paper jam. If this error reappears, use different media.

41.X

- code :

41.X

- affichage :

41.<X> ERROR

- description :

A temporary printing error has occurred

48.01

- code :

48.01

- affichage :

48.01 TRANSFER UNIT ERROR

- description :

The transfer belt has dislocated during printing.

49.XXXX

- code :

49.XXXX

- affichage :

49.XXXX

- description :

A critical firmware error has occurred that caused the processor on the formatter to abort operation. This type of error can be caused by invalid print commands. corrupt data, or invalid operations. In some cases, electrical noise in the cable can corrupt data during transmission to the printer. Other causes include poor-quality USB cables, poor connections, or home-grown programs. On rare occasions, the formatter is at fault, which is usually indicated by a 79 Service Error.

50.1

- code :

50.1

- affichage :

50.1 FUSER ERROR

- description :

The fuser has experienced a lowtemperature error.

50.10

- code :

50.10

- affichage :

50.10 FUSER ERROR

- description :

The fuser has experienced a lowtemperature error.

50.11

- code :

50.11

- affichage :

50.11 FUSER ERROR

- description :

The fuser has experienced a hightemperature error.

50.2

- code :

50.2

- affichage :

50.2 FUSER ERROR

- description :

The fuser has experienced a warm-up error.

50.3

- code :

50.3

- affichage :

50.3 FUSER ERROR

- description :

The fuser has experienced a hightemperature error.

50.4

- code :

50.4

- affichage :

50.4 FUSER ERROR

- description :

The fuser driver circuit has experienced an error.

50.5

- code :

50.5

- affichage :

50.5 FUSER ERROR

- description :

The fuser has experienced a type-mismatch error.

50.7

- code :

50.7

- affichage :

50.7 FUSER ERROR

- description :

The fuser has experienced a pressure release mechanism error.

50.8

- code :

50.8

- affichage :

50.8 FUSER ERROR

- description :

The fuser has experienced a lowtemperature error.

50.9

- code :

50.9

- affichage :

50.9 FUSER ERROR

- description :

The fuser has experienced a hightemperature error.

50.X

- code :

50.X

- affichage :

50.X FUSER ERROR

- description :

A fuser error has occurred.

51.20

- code :

51.20

- affichage :

51.20 ERROR

- description :

The black laser (51.20) or cyan laser (51.21) has experienced an error.

51.21

- code :

51.21

- affichage :

51.21 ERROR

- description :

The black laser (51.20) or cyan laser (51.21) has experienced an error.

51.22

- code :

51.22

- affichage :

51.22 ERROR

- description :

The magenta laser (51.22) or yellow laser (51.23) has experienced an error.

51.XY

- code :

51.XY

- affichage :

51.<XY> ERROR

- description :

A printer error has occurred.

52.00

- code :

52.00

- affichage :

52.00 ERROR

- description :

The scanner has experienced a startup error.

52.20

- code :

52.20

- affichage :

52.20 ERROR

- description :

The scanner has experienced a rotational error.

52.XY

- code :

52.XY

- affichage :

52.<XY> ERROR

- description :

A printer error has occurred.

53.XY.ZZ

- code :

53.XY.ZZ

- affichage :

53.XY.ZZ CHECK RAM DIMM SLOT <X>

- description :

A RAM DIMM error has occurred. X=1 slot toward the outside of the formatter board. X=2 is the slot closest to the hard disc.

54.01

- code :

54.01

- affichage :

54.01 ERROR

- description :

The environment sensor has experienced an error.

54.15

- code :

54.15

- affichage :

54.15 ERROR

- description :

The yellow-toner-level sensor has experienced an error.

54.16

- code :

54.16

- affichage :

54.16 ERROR

- description :

The magenta-toner-level sensor has experienced an error.

54.17

- code :

54.17

- affichage :

54.17 ERROR

- description :

The cyan-toner-level sensor has experienced an error.

54.18

- code :

54.18

- affichage :

54.18 ERROR

- description :

The black-toner-level sensor has experienced an error.

54.XX

- code :

54.XX

- affichage :

54.<XX> ERROR

- description :

Error requires that the product be turned off then on.

55.00.00

- code :

55.00.00

- affichage :

55.00.00 DC CONTROLLER ERROR

- description :

The DC controller has experienced a communication error.

55.01.YY

- code :

55.01.YY

- affichage :

55.01.YY DC CONTROLLER ERROR

- description :

The DC controller has experienced a memory error.

55.XX.YY

- code :

55.XX.YY

- affichage :

55.XX.YY DC CONTROLLER ERROR

- description :

The print engine is not communicating with the formatter.

56.02

- code :

56.02

- affichage :

56.02 ERROR

- description :

The product has experienced an output error.

56.X

- code :

56.X

- affichage :

56.X ERROR

- description :

A temporary printing error has occurred

57.01

- code :

57.01

- affichage :

57.01 ERROR

- description :

The laser/scanner-unit cooling fan (FM1) has experienced an error.

57.02

- code :

57.02

- affichage :

57.02 ERROR

- description :

The VOC fan (FM4) has experienced an error.

57.03

- code :

57.03

- affichage :

57.03 ERROR

- description :

The fuser cooling fan (FM2) has experienced an error.

57.04

- code :

57.04

- affichage :

57.04 ERROR

- description :

The cartridge area cooling fan (FM3) has experienced an error.

57.05

- code :

57.05

- affichage :

57.05 ERROR

- description :

The low-voltage power supply cooling fan (FM5) has experienced an error.

57.06

- code :

57.06

- affichage :

57.06 ERROR

- description :

The cartridge front area cooling fan (FM6) has experienced an error.

57.07

- code :

57.07

- affichage :

57.07 ERROR

- description :

The laser/scanner-unit cooling fan (FM1) has experienced an error.

57.08

- code :

57.08

- affichage :

57.08 ERROR

- description :

The delivery-unit cooling fan (FM7) has experienced an error.

57.09

- code :

57.09

- affichage :

57.09 ERROR

- description :

The IPTU feed-unit cooling fan (FM8) has experienced an error.

57.0A

- code :

57.0A

- affichage :

57.0A ERROR

- description :

The duplexing-unit cooling fan (FM1) has experienced an error.

57.XX

- code :

57.XX

- affichage :

57.XX ERROR

- description :

A temporary printing error has occurred.

58.04

- code :

58.04

- affichage :

58.04 ERROR

- description :

The low-voltage power supply has experienced an error.

58.XX

- code :

58.XX

- affichage :

58.XX ERROR

- description :

A temporary printing error has occurred.

59.10

- code :

59.10

- affichage :

59.10 ERROR

- description :

The ITB motor has experienced a startup error.

59.20

- code :

59.20

- affichage :

59.20 ERROR

- description :

The ITB motor has experienced a rotational error.

59.30

- code :

59.30

- affichage :

59.30 ERROR

- description :

The fuser motor has experienced a startup error.

59.40

- code :

59.40

- affichage :

59.40 ERROR

- description :

The fuser motor has experienced a rotational error

59.50

- code :

59.50

- affichage :

59.50 ERROR

- description :

The black-image-drum motor has experienced a startup error.

59.51

- code :

59.51

- affichage :

59.51 ERROR

- description :

The cyan-image-drum motor has experienced a startup error.

59.52

- code :

59.52

- affichage :

59.52 ERROR

- description :

The magenta-image-drum motor has experienced a startup error.

59.53

- code :

59.53

- affichage :

59.53 ERROR

- description :

The yellow-image-drum motor has experienced a startup error.

59.60

- code :

59.60

- affichage :

59.60 ERROR

- description :

The black-image-drum motor has experienced a rotational error.

59.61

- code :

59.61

- affichage :

59.61 ERROR

- description :

The cyan-image-drum motor has experienced a rotational error.

59.62

- code :

59.62

- affichage :

59.62 ERROR

- description :

The magenta-image-drum motor has experienced a rotational error.

59.63

- code :

59.63

- affichage :

59.63 ERROR

- description :

The yellow-image-drum motor has experienced a rotational error.

59.C0

- code :

59.C0

- affichage :

59.C0 ERROR

- description :

The developer-alienation motor has experienced a rotational error.

59.F0

- code :

59.F0

- affichage :

59.F0 ERROR

- description :

The transfer-roller alienation motor has experienced an error.

59.XY

- code :

59.XY

- affichage :

59.XY ERROR

- description :

A temporary printing error has occurred.

60.03

- code :

60.03

- affichage :

60.03 ERROR

- description :

The Tray-2 lifter motor has experienced an error.

60.04

- code :

60.04

- affichage :

60.04 ERROR

- description :

The Tray-3 lifter motor has experienced an error.

60.05

- code :

60.05

- affichage :

60.05 ERROR

- description :

The Tray-4 lifter motor has experienced an error.

60.06

- code :

60.06

- affichage :

60.06 ERROR

- description :

The Tray-5 lifter motor has experienced an error.

60.X

- code :

60.X

- affichage :

60.X ERROR

- description :

The tray specified by X is not lifting correctly.

66.12.01

- code :

66.12.01

- affichage :

66.12.01

- description :

Finisher-to-engine communication error The communication between the print engine and the finisher has been interrupted or lost.

66.12.02

- code :

66.12.02

- affichage :

66.12.02

- description :

Finisher board communication error Occurs when the finisher's stacker controller board has had a internal communication problem between the two processors on the board.

66.12.03

- code :

66.12.03

- affichage :

66.12.03

- description :

Finisher-control-board RAM error The checksum for the finisher stacker controller PCA has an error when the power is turned on.

66.12.11

- code :

66.12.11

- affichage :

66.12.11

- description :

Finisher error: swing motor (M36) and the swing-guide home-position sensor (PI35) Occurs when the swing guide does not leave its home position (swing-guide home-position sensor: PI35) after the swing motor (M36) is activated for 3 seconds. Also occurs when the swing guide does not return to its home position (swing-guide home-position sensor: PI35) after the swing motor (M36) is activated for 3 seconds.

66.12.12

- code :

66.12.12

- affichage :

66.12.12

- description :

Finisher error - shutter movement malfunction Normal operation: When the shutter clutch (CL31) and stack ejection lower roller clutch (CL32) are on, the shutter moves up (closed) when the stack ejection motor (M32) turns forward and moves down (open, delivery enabled) when the motor turns backwards. Error occurs when the shutter home position sensor (PI45) indicates no change when the stack ejection motor (M32) is activated for 3 seconds, indicating that the shutter is not moving.

66.12.13

- code :

66.12.13

- affichage :

66.12.13

- description :

Finisher error - stack trailing-edge motor (M39) In order to improve stacking performance when ejecting copies, a trailing edge assist guide is used in addition to the stack ejection roller to support the rear end of the stack during stack ejection. Error occurs when the stacker trailing-edge guide does not leave its home position (PI39) after the stack trailing-edge motor (M39) has been turned on for 3 seconds.

66.12.14

- code :

66.12.14

- affichage :

66.12.14

- description :

Finisher stapling and offsetting front-aligningplate motor failure In order to neatly align the paper stack for either stapling or offsetting to take place, the front and rear-aligning plates move to align each sheet when it enters the processing tray. The error occurs when the aligning plate either does not leave or when it does not return to the aligning-plate front-homeposition sensor (PI36) when the frontaligning- plate motor (M33) has been driven for 4 seconds.

66.12.15

- code :

66.12.15

- affichage :

66.12.15

- description :

Finisher stapling or offsetting rear aligning plate motor failure (M34) In order to neatly align the paper stack for either stapling or offsetting to take place, the front and rear aligning plates move to align each sheet when it enters the processing tray. The error occurs when the aligning plate either does not leave or when it does not return to the aligning-plate-rear-homeposition sensor (PI37) when the alignment plate rear motor (M34) has been driven for 4 seconds.

66.12.16

- code :

66.12.16

- affichage :

66.12.16

- description :

Finisher error - speed change motor (M40) The speed change motor M40 and sensor PI49 associated with this error have been removed from the output device prior to introduction to the field. This error message should never be seen in the field.

66.12.21

- code :

66.12.21

- affichage :

66.12.21

- description :

Finisher upper-stapler-motor failure (M41) Error occurs either when the stapler does not leave stapler home position (PI50) after staple motor (M41) is driven for 0.4 seconds or when it does not return to stapler home position after the staple motor has detected a motor lock condition and the motor is driven backwards for 0.4 seconds, attempting to reach home position. NOTE: PI50 and M41 are located on the stapler assembly and can only be replaced by replacing entire stapler assembly. M41 (staple motor) drives the insertion and crimping of the staple only (not location of the staple on paper). PI50 senses the home position of the stapler as it is inserting and crimping a staple only (not location of the staple on the paper). The stapler-safety switch (MS34) that assures that stapler motor (M41) is disabled when it senses a finger may be in the stapler.

66.12.22

- code :

66.12.22

- affichage :

66.12.22

- description :

Finisher upper stapler shift motor failure (M35) Error occurs when the stapler does not leave the stapler-shift home-position sensor (PI40) after the stapler-shift motor (M35) has driven for 5 seconds. Also occurs when the stapler fails to return to the stapler-shift home-position sensor (PI40) after the stapler-shift motor (M35) has been driven for 20 seconds.

66.12.23

- code :

66.12.23

- affichage :

66.12.23

- description :

Finisher upper-stapler failure Occurs when stapler alignment interference sensor (PI46) is activated, signaling that the stapler unit is not in its proper position for stapling to occur. This is to prevent damage to stapler from occurring when stapler is positioned over one of the three stoppers when the signal to staple has been sent.

66.12.31

- code :

66.12.31

- affichage :

66.12.31

- description :

Finisher error - 1st tray lift/lower motor (M37) Occurs when the output bin 1 does not activate the home-position sensor (PI41) when the output-bin-1 shift motor (M37) is driven for 20 seconds. Also occurs when output bin 1 does not move when output-bin-1 shift motor (M37) is driven for 4 seconds. Also occurs when output-bin-1 switch (MSW33) is activated while output bin 1 is operating. NOTE: Output-bin-1 home position is detected using the top sheet of paper on the bin when paper is present and the edge of the bin itself when there is no paper on the bin.

66.12.32

- code :

66.12.32

- affichage :

66.12.32

- description :

Finisher error: second-tray-lift/lower motor (M38) Occurs when the output bin 2 does not activate the home-position sensor (PI48) when the output-bin-1 shift motor (M38) is driven for 20 seconds. Also occurs when output bin 2 does not move when output-bin-1 shift motor (M38) is driven for 4 seconds. Also occurs when bin-2 upper limit is detected by PS983, PS982, PS981 on the Tray-2 shift PCA when no paper has been sensed by the output-bin-2 paper sensor (PI43). NOTE: Output-bin-2 home position is detected using the top sheet of paper on the bin when paper is present and the edge of the bin itself when there is no paper on the bin.

66.12.41

- code :

66.12.41

- affichage :

66.12.41

- description :

Finisher: folding-paper-positioning-plate motor (M4) The paper-positioning-plate motor (M4), located in the booklet-making area of the finisher, controls the up and down positioning of the stacked paper for stitch stapling and for folding. An error occurs when the paper-positioningplate home-position sensor (PI7) does not turn on when the paper-positioning-plate motor (M4) has been driven for 1500 pulses. Also occurs when the paper-positioning-plate home-position sensor (PI7) does not turn off when the paper-positioning-plate motor (M4) has been driven for 300 pulses.

66.12.42

- code :

66.12.42

- affichage :

66.12.42

- description :

Finisher error: folding-guide motor (M3) The guide motor (M3), located in the bookletmaking area of the finisher, controls the position of the guide plate. The guide plate is positioned in front of the folding rollers as the paper stack is being stapled, allowing the bottom edge of the paper to smoothly pass by the folding rollers. When the stacked paper is lowered to the folding position, the guide motor (M3) lowers the guide plate out of the way to allow the paper stack to be pushed into the folding rollers. Error occurs when The guide-home-position sensor (PI13) does not turn on when the guide motor (M3) has been driven for 700 pulses. Also occurs when the guide-home-position sensor (PI13) does not turn off when the guide motor (M3) has been driven for 50 pulses.

66.12.43

- code :

66.12.43

- affichage :

66.12.43

- description :

Finisher error: paper-fold motor (M2) M2: paper-fold motor, located in the booklet making area of the finisher, drives the rotation of the folding rollers to create the desired fold in the paper. The error occurs when the number of pulses by the paper-fold-motor clock sensor (PI4) is less than expected standard value. Also occurs when the status of the paper-fold home-position sensor (PI21) does not change when the paper-fold motor (M2) has been driven for 3 seconds.

66.12.44

- code :

66.12.44

- affichage :

66.12.44

- description :

Finisher - folding-paper-alignment motor (M5) M5: The alignment motor, located in the booklet making area of the finisher, drives the two alignment plates that adjust the side edges of the stacked paper so that the paper in the stack is perfectly aligned with one another. Error occurs when the aligning-plate homeposition sensor (PI5) does not turn on when the aligning plate motor (M5) has been driven for 500 pulses. Also occurs when the aligning-plate homeposition sensor (PI5) does not turn off when the aligning-plate motor (M5) has been driven for 50 pulses.

66.12.45

- code :

66.12.45

- affichage :

66.12.45

- description :

Finisher: paper-pushing-plate motor (M8) Error occurs when the paper-pushing-plate home-position sensor (PI14) does not turn on when the paper-pushing-plate motor (M8) has been driven for 0.3 seconds. Also occurs when the paper-pushing-plate home-position sensor (PI14) does not turn off when the paper-pushing-plate motor (M8) has been driven for 80 ms. Also occurs when the paper pushing-plate leading-edge-position sensor (PI15) does not turn off when the paper-pushing-plate motor (M8) has been driven for 80 ms. Also occurs when the number of pulses detected by the paper-pushing-plate motor clock sensor (PI1) is less than expected standard value. Also occurs when the paper pushing-plateleading- edge-position sensor (PI15) does not turn on when the paper-pushing-plate motor (M8) has been driven for 0.3 seconds.

66.12.46

- code :

66.12.46

- affichage :

66.12.46

- description :

Finisher: communication lost with stitcher controller PCA Error occurs when communication between the stacker-controller board and the saddlestitcher- controller board has been lost or interrupted.

66.12.47

- code :

66.12.47

- affichage :

66.12.47

- description :

Finisher error: micro switches and doors There are three switches in the bookletmaker finisher: SW1 (saddle-guide switch also known as the inlet-door switch), SW3 the booklet-ejection door switch, and MS31 the front-door switch. The stapler/stacker finisher only has one switch, MS31 for the front door of the finisher. All three switches detect if the associated door or guide plate is open or closed. Each of the switches also have a sensor (SW1/PI9, SW3/PI3, and MS31/PI32) that acts as a backup and detects the same information as the switches. The error occurs when all the doors and guides are closed and there is a mismatch in readings between the sensors and the switches. For example, the front-finisher door is closed, PI32 senses the door is closed and MS31 senses the door is still open. Associated finisher door and guide switches and sensors are as follows: • Saddle-guide switch SW1 and saddleguide sensor PI9 • Booklet-ejection-door switch SW3 and booklet-ejection-door sensor PI3 • Front-door switch MS31 and front-door sensor PI32

66.12.51

- code :

66.12.51

- affichage :

66.12.51

- description :

Finisher error- rear-booklet-stapler motor (M6) The booklet-maker stitch staplers do not move to different locations in relation to the paper like the main stapler. The only movement is through the movement of the rotary cam located on the stapler unit itself, during the actual stapling of the booklet. The stitch-home-position switch (SW5) is part of the rear stitch stapler unit and senses the stapler opening and closing during stapling by the motion of the rotary drive cam. Like SW5, the stitch motor (M6) is also part of the overall stitch-stapler unit and replacement requires the replacement of saddle-stapler assembly. Error occurs when the front booklet-makerstapler stitching-home-position sensor (SW5) does not turn on when the stitch motor (rear) (M6) has been driven forward for 0.5 seconds. Also occurs when the front booklet-makerstapler stitching-home-position sensor (SW5) does not turn off when the stitch motor (rear) (M6) has been driven forward for 0.5 seconds.

66.12.52

- code :

66.12.52

- affichage :

66.12.52

- description :

Finisher error - front booklet-stapler motor (M7) The booklet-maker stitch staplers do not move to different locations in relation to the paper like the main stapler. The only movement is through the movement of the rotary cam located on the stapler unit itself, during the actual stapling of the booklet. The stitch-home-position switch (SW7) is part of the front stitch stapler unit and senses the stapler opening and closing during stapling by the motion of the rotary drive cam. Like SW7, the stitch motor (M7) is also part of the overall stitch stapler unit and replacement requires the replacement of saddle-stapler assembly. Error occurs when the front booklet-maker stapler stitching home position sensor (SW7) does not turn on when the stitch motor (front) (M7) has been driven forward for 0.5 seconds. Also occurs when the front booklet-maker stapler-stitching home-position sensor (SW7) does not turn off when the stitch motor (front) (M7) has been driven forward for 0.5 seconds.

66.XY.ZZ

- code :

66.XY.ZZ

- affichage :

66.XY.ZZ SERVICE ERROR

- description :

The external paper-handling controller has detected a failure.

68.X

- code :

68.X

- affichage :

68.X STORAGE ERROR SETTINGS CHANGED

- description :

One or more product settings are invalid and have been reset to the factory-default settings. Printing can continue, but some unexpected functions might occur if an error occurred in permanent storage.

69.X

- code :

69.X

- affichage :

69.X ERROR

- description :

A temporary printing error occurred.

Le problème provient probablement d'une pièce à remplacer.

Pièces d'usures remplacées frequemment sur la HP Color LaserJet CP6015, CP6015N, CP6015DN, CP6015XH

Nomenclature des pièces détachées de la HP Color LaserJet CP6015, CP6015N, CP6015DN, CP6015XH

RL1-1289-000CNROLLER, PICK
Q3931-67935110-127V FUSER KIT (FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE) Kit Part Number
Q3931-67914110-127V FUSER KIT (FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE) Kit Part Number
Q3931-69001110V Fuser kit (Four, unité de fusion, kit de maintenance) Repaired
Q3931-67902128MB 167MHz 200 pin DDR DIMM
Q3931-67915220-240V FUSER KIT (FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE) Kit Part Number
Q3931-67936220-240V FUSER KIT (FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE) Kit
Q3931-69002220V Fuser kit (Four, unité de fusion, kit de maintenance) Repaired
Q3931-67903256MB 167MHz 200 pin DDR DIMM
RM1-3319-000CN2ND TRNSFR. ROLLER ASS Y
Q3931-679102ND TRNSFR. ROLLER ASSY Kit
CB474-69001500 Bac à papier Kit
Q3931-67904512MB 167MHz 200 pin DDR DIMM
FM2-0710-000CNAPPROACH SWITCH ASSY
Q7815-67904Arabic Font USB Solution
RM1-4107-000CNAREA SENSOR FLAG ASSY
FM2-0709-000CNAREA SENSOR HOLDER ASSY
4G1-1498-000CNAREA SENSOR PCB ASSY
RC1-9189-000CNARM, 1ST ESTRANGEMENT
4A3-1763-000CNARM, ADJUSTMENT, FRONT
4A3-1764-000CNARM, ADJUSTMENT, REAR
RM1-3581-050CNAssembly-DC Controller PCB, 1.61
RM1-3581-080CNAssembly-DC Controller PCB, 1.83
RM1-3581-040CNAssembly-DC Controller PCB, R1.57.00
RC1-9043-000CNBAND, DOOR
XG9-0586-000CNBEARING, BALL
4S3-1050-000CNBEARING,BALL,6902ZZNR
XF2-1608-840CNBELT, TIMING
XF2-1607-860CNBELT, TIMING, COGGED
XF9-0748-000CNBELT, TIMING, COGGED
XF2-3837-340CNBELT,TIMING
Q6999-67902Booklet Delivery Bin
RM1-4113-000CNBooklet Output Bin Assembly
RU5-1080-000CNBUSHING
RC1-8734-000CNBUSHING
FU5-1169-000CNBUSHING
RC1-9300-000CNBUTTON, MAIN SWITCH
RM1-3258-000CNC.P.R. SENSOR ASS Y
RM1-4128-000CNCABLE MOUNT LATTICE ASSY
RM1-5029-000CNCABLE, FIXING OPEN SENSOR
RK2-1356-000CNCABLE, FLEXIBLE FLAT
RK2-1354-000CNCABLE, LASER FLEXIBLE FLAT
RK2-1355-000CNCABLE, LASER FLEXIBLE FLAT
FG3-2903-000CNCABLE, OPERATION TRAY
4G1-2283-000CNCABLE, SADDLE UNIT
4G1-2285-000CNCABLE, SENSOR
FG3-2892-000CNCABLE, SOLENOID
4G3-1777-000CNCABLE, STAPLE CONNECTING ASSY
RM1-5030-000CNCABLE, TP/T2 OPEN SENSOR
RM1-3254-000CNCARTOUCHE, TONER CONTACT HOLDER ASS Y
RM1-4419-000CNCARTOUCHE, TONER INTERFACE ASSY
Q3931-67926Cartouche, toner Interface assy Kit and servic
Q3931-67917Cartouche, toner Interface assy Kit and servic
RM1-3202-040CNCASSETTE ASS Y
Q3931-67918CASSETTE ASSY Kit
RM1-3212-000CNCassette Front Assembly
RM1-3206-000CNCASSETTE PAPER PICK-UP ASS Y
WT2-5912-000CNCLAMP, FFC
RC1-9261-000CNCLAMP, FORMATTER CABLE
FC5-5021-000CNCLAW, LATCH, RIGHT
WT2-5694-000CNCLIP CLAMP, WIRE
Q3938-67968BULKCLJ CP6015/CM6030/CM6040 Roller Kit
4H3-0370-000CNCLUTCH, ELECTROMAGNETIC
VS1-7177-003CNCONNECTOR
VS1-7177-002CNCONNECTOR, 2P
VS1-7258-014CNCONNECTOR, DRAWER
RM1-4516-000CNCONTROL PANEL UNIT
RC1-9201-000CNCOVER, CASSETTE BACK END
Q3931-67905COVER, FACE-DOWN
RC1-9340-000CNCOVER, FACE-DOWN
RC1-9360-000CNCOVER, FACE-DOWN DRIVE
RC2-1351-000CNCOVER, INTERNAL, LOWER
RL1-1477-000CNCOVER, INTERNAL, LOWER
RC1-9348-000CNCOVER, INTERNAL, RIGHT
RC1-9336-000CNCOVER, LEFT
RC2-1280-000CNCOVER, LEFT LOWER
RC1-9211-000CNCOVER, MAIN SWITCH
RC1-9511-000CNCOVER, MOTOR
RC1-8527-000CNCOVER, MULTI-PURPOSE BLANKING
RC2-1347-000CNCOVER, OPTION SLIDE
RC1-9341-000CNCOVER, PANEL
RC2-1278-000CNCOVER, REAR
RL1-1210-000CNCOVER, REAR
RC1-9344-000CNCOVER, REAR LEFT
RC1-9342-000CNCOVER, REAR UPPER
RC1-9339-000CNCOVER, RIGHT UPPER
RC2-1279-000CNCOVER, TRAY CONNECTOR
RM1-3624-000CNCPR JOINT CABLE
Q7815-67902Cyrillic Font USB Solution
RC1-8925-000CNDAMPER, GEAR
RM1-3610-000CNDC CONT. POWER CABLE
Q3931-67922DC Controller Kit
Q3931-67916DC Controller Kit with service document
RM1-3581-000CNDC CONTROLLER PCB ASS Y
RM1-3581-070CNDC CONTROLLER PCB ASSY
RM1-4519-000CNDC MOTOR ASS Y
FM2-1639-000CNDELIVERY SWITCH MOUNT ASSY
VS1-7258-012CNDrawer connector
RM1-3286-000CNDRUM MOTOR ASS Y
RC1-8961-000CNDUCT, AIR
RC1-9276-000CNDUCT, CARTOUCHE, TONER
RC1-8964-000CNDUCT, FACE-DOWN JOINT
RC1-9334-000CNDUCT, SCANNER
RC1-9309-000CNDUCT, SCANNER FAN
Q3931-67921DUPLEX Switchback TRAY ASSY Kit
RM1-3665-000CNDUPLEXING FEED ASS Y
RM1-3652-000CNDUPLEXING REVERSE ASS Y
RM1-3652-040CNDUPLEXING REVERSE ASSY
RM1-5948-000CNDUPLEXING TRAY ASSY
RM1-4110-000CNENTRANCE LOWER GUIDE ASSY
FM2-0718-000CNENTRANCE SENSOR FLAG ASSY
RM2-5849-000CNENTRANCE SENSOR FLAG ASSY
RM1-4172-000CNENTRANCE UPPER GUIDE ASSY
RM1-3340-000CNFACE-DOWN END TRAY ASS Y
RM1-4391-000CNFACE-DOWN FULL FLAG ASS Y
RM1-3293-010CNFACE-DOWN PAPER DELIVERY ASS Y
RM1-3293-000CNFACE-DOWN PAPER DELIVERY ASS Y
RM1-3390-000CNFACE-DOWN UNIT 1 CABLE
RM1-3391-000CNFACE-DOWN UNIT 2 CABLE
RK2-1377-000CNFAN
RK2-1378-000CNFAN
RK2-1382-000CNFAN
RM1-3364-000CNFAN ASS Y
4G3-0733-000CNFEED MOTOR ASSY
RL1-1291-000CNFILTER UNIT, AIR
Q3931-67906FILTER UNIT, AIR Kit Part Number
RC1-9313-000CNFILTER UNIT, AIR
RM1-3242-000CNFIXING ASS Y
RM1-3242-020CNFIXING ASS Y
RM1-3244-000CNFIXING ASS Y
Q3931-67941Fixing Assembly kit
Q3931-67940Fixing Assembly Kit
RM1-3242-030CNFUSER KIT (FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE)
RM1-3244-020CNFuser kit (Four, unité de fusion, kit de maintenance)
RM1-3244-030CNFUSER KIT (FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE)
RM1-4409-000CNFIXING BIAS CABLE ASS Y
RM1-5950-000CNFIXING FAN COVER ASS Y
RM1-3612-000CNFIXING JOINT CABLE
RM1-3217-000CNFIXING MOTOR CABLE
RM1-3247-020CNFIXING ONE-WAY
RM1-3247-000CNFIXING ONE-WAY GEAR ASS Y
RM1-3218-000CNFIXING POWER SUPPLY ASS Y
FC5-5004-000CNFLAG, PAPER SENSING SENSOR
FB3-7925-030CNFLAG, ROLLER
FB5-5937-020CNFLAG, SENSOR
FB3-7979-000CNFLAG, SENSOR
FB3-7928-020CNFLAPPER #1 (DEFLECTOR)
FB5-2697-000CNFLAPPER #2 (DEFLECTOR)
FM2-0720-000CNFLEXIBLE CABLE MOUNT ASSY
RC1-9208-000CNFOOT, RUBBER
Q7539-69001Formatter (NW/HDI)
RM1-3253-000CNFORMATTER CASE ASS Y
RM1-3617-000CNFRONT CABLE
RM1-3356-000CNFRONT DOOR ASSY
FS6-0830-000CNGEAR, 16T
FS6-0823-000CNGEAR, 16T
FS6-0822-000CNGEAR, 16T/33T
FS6-0829-000CNGEAR, 16T/56T
FU5-0457-000CNGEAR, 17T
FU5-2399-000CNGEAR, 29T
FU5-0428-000CNGEAR, 30T
RU5-0791-000CNGEAR, 34T
FU5-0454-000CNGEAR, 40T
FU5-0435-000CNGEAR, 44T
4S3-0171-000CNGEAR, 50T
RU5-0790-000CNGEAR, 83T/25T
Q7815-67903Greek Font USB Solution
RM1-3225-000CNGRIP SUPPORT FRONT ASS Y
RM1-3226-000CNGRIP SUPPORT REAR ASS Y
4G3-0725-000CNGUIDE MOTOR ASSY
RM1-4400-000CNGUIDE SENSOR ASS Y
RC1-9329-000CNGUIDE, CABLE
RC1-9306-000CNGUIDE, CABLE, A
RC1-9307-000CNGUIDE, CABLE, B
RC1-9308-000CNGUIDE, CABLE, C
RC1-9312-000CNGUIDE, CABLE, D
RC1-9318-000CNGUIDE, CABLE, E
RC1-9323-000CNGUIDE, CABLE, F
RL1-1335-000CNGUIDE, DUPLEXING FEED, UPPER
RC1-8959-000CNGUIDE, FACE-DOWN INNER
RC1-9332-000CNGUIDE, FIXING CABLE
RC1-9185-000CNGUIDE, I.T.B. ENTRANCE, FRONT
RC1-9186-000CNGUIDE, I.T.B. ENTRANCE, REAR
RL1-1283-000CNGUIDE, MULTI-PURPOSE, RIGHT
RC1-8526-000CNGUIDE, MULTI-PURPOSE, UPPER
RC1-8526-020CNGUIDE, MULTI-PURPOSE, UPPER
RC2-1284-000CNGUIDE, SIDE WALL
Q7829-67925HCI FEED ROLLER (BLUE)
Q7829-67925-5HCI FEED ROLLER (BLUE)
Q7815-67901Hebrew Font USB Solution
RM1-3582-000CNHIGH VOLTAGE TRAN. A PCB ASS Y
RM1-5475-000CNHIGH VOLTAGE TRAN. B PCB ASS Y
RC1-9277-000CNHOLDER, CARTOUCHE, TONER FAN
RC1-9324-000CNHOLDER, ENVIRONMENT SENSOR
RC1-9278-000CNHOLDER, FIXING FAN
RC1-9328-000CNHOLDER, HIGH VOLTAGE CONNECTOR
FB3-7973-000CNHOLDER, ROLLER, 2
RC1-9279-000CNHOLDER, SCANNER FAN
RC1-9260-000CNHOLDER, SCANNER THERMISTOR
CB384-67901HP CLJ Black Image Drum CB384A
CB385-67901HP CLJ Cyan Image Drum CB385A
CB381-67901HP CLJ Cyan Print Cartouche, toner
CB387-67901HP CLJ Magenta Image Drum CB387A
CB383-67901HP CLJ Magenta Print Cartouche, toner
CB386-67901HP CLJ Yellow Image Drum CB386A
CB382-67901HP CLJ Yellow Print Cartouche, toner
CB457AHP Color LaserJet 110volt Fuser kit (Four, unité de fusion, kit de maintenance) KiT
RM1-3240-000CNI.T.B. DRAWER ASS Y
RM1-4401-000CNI.T.B. DUCT ASS Y
RM1-3280-000CNI.T.B. ESTRANG. DRIVE ASS Y
RM1-3215-000CNI.T.B. LOCK SUPPORT REAR ASS Y
RM1-3228-000CNI.T.B.LOCK SUPPORT FRONT ASS Y
Q3938-67989-BUImage transfer assembly
Q3938-67965Image Transfer Kit (150K life)
Q3938-68001IMAGE TRANSFER KIT (150K LIFE)
Q3938-67989IMAGE TRANSFER KIT (150K LIFE)
RM1-4123-000CNINNER COVER ASSY
4G3-0671-000CNINNER SIDE PLATE ASSY
RM1-3623-000CNINTERFACE JOINT CABLE
RM1-3589-000CNINTERLOCK SWITCH ASS Y
RM1-3307-BULKINTERMEDIATE TRANS. BELT ASS Y
RM1-3307-000CNINTERMEDIATE TRANS. BELT ASS Y
RM1-3307-040CNINTERMEDIATE TRANS. BELT ASS Y
Q3931-67908INTERMEDIATE TRANS. BELT ASSY kit
RC1-9348-020CNINTERNAL RIGHT COVER
Q7539-69004KIT- FRMTR REPLACEMENT
Q7539-69005KIT- FRMTR REPLACEMENT 04,090,2 Rohs2.04
Q7539-69002KIT- FRMTR REPLACEMENT 04.043.2
Q7539-69003KIT- FRMTR REPLACEMENT 04.090.2
Q3931-67938Kit of 12 rollers- 1 set tray 2 to 5
Q3931-67938BULKKit of 12 rollers-1 set tray 2 to 5
Q3931-67930Kit-DC Cont. w/service doc, 1.61
Q3931-67931Kit-DC Cont. w/service doc, 1.61
Q3931-67928Kit-DC Controller w/service doc, 1.57-
Q3931-67937Kit-DC Controller w/service doc, 1.83
FB3-7881-000CNKNOB
FC5-5024-000CNKNOB, LATCH
Q3931-67939Latch Hooks for 2nd Transfer Assy
RM1-4141-000CNLED PCB ASSY
RM1-3233-000CNLEFT SIDE WALL ASS Y
RM1-4129-000CNLEFT UPPER COVER ASSY
RC1-9220-000CNLEVER, DOOR INTERLOCK SHUTTER
RC1-8928-000CNLEVER, PAPER SENSING
4A3-1782-000CNLEVER, STOPPER
RM1-3222-020CNLIFTER DRIVE ASS Y
RM1-3222-150CNLifter drive assy
FC5-3657-000CNLIMITER, TORQUE
RC1-8519-000CNLIMITTER, TORQUE
4G3-0271-000CNLINK SLIDE ASSY
RM2-0190-000CNLOW VOLTAGE POWER SUPPLY ASS Y
RM1-3594-000CNLOW VOLTAGE POWER SUPPLY ASS Y
RM1-4135-000CNLOWER HEIGHT GUIDE ASSY
RM1-3345-000CNM.P. PAPER PICK-UP ASS Y
RM1-3345-110CNM.P. PAPER PICK-UP ASS Y
RM1-4139-050CNMAIN CONTROLLER PCB ASSY
RM1-4139-000CNMAIN CONTROLLER PCB ASSY
RM1-4416-030CNMain Drive Unit
Q3931-67911Main Drive Unit Kit and Service Document
RM1-4416-000CNMAIN DRIVE UNIT
RM1-3252-000CNMAIN SWITCH HOLDER ASS Y
RM1-3585-000CNMEMORY TAG PCB ASS Y
RM1-4119-000CNMIDDLE HEIGHT COVER ASSY
4G3-0670-000CNMOTOR MOUNT ASSEMBLY
4K1-1103-000CNMOTOR, STEPPING
RK2-1370-000CNMOTOR, STEPPING, DC
RK2-1366-000CNMOTOR, STEPPING, DC
RM1-3630-000CNMULTI TRAY CABLE
RM1-3366-010CNMULTI-PURPOSE DRIVE ASS Y
RM1-3366-000CNMULTI-PURPOSE DRIVE ASS Y
RM1-3291-000CNMULTI-PURPOSE GUIDE ASS Y
RM1-3341-000CNMULTI-PURPOSE TRAY ASS Y
RM1-4125-000CNOPERATION TRAY ASSY
FM2-1708-000CNOPTION SENSOR ASSY
RM1-4105-000CNOUTPUT BIN 2 (STACK LOWER TRAY ASSY)
RM1-4102-000CNOUTPUT BIN1(BM) (STACK UPPER TRAY ASSY)
RM1-4101-000CNOUTPUT BIN1(SS) (STACK UPPER TRAY ASSY)
Q3931-40051Overlay-Control Panel-EN/AR
Q3931-40059OVERLAY-CONTROL PANEL-EN/HE
Q3931-40053Overlay-Control Panel-EN/HE
RM1-3389-000CNPANEL CABLE
RM1-3622-000CNPANEL JOINT CABLE
RC2-1283-000CNPANEL, HEIGHT, UPPER
RM1-4407-000CNPAPER DELIVERY GUIDE ASS Y
4G3-1624-000CNPAPER FACE SENSING ASSY
4G3-0934-000CNPAPER FACE SENSOR ASSY
RM1-0037-020CNPAPER FEED ROLLER ASSY
RM1-3533-010CNPAPER PICK-UP ASSY
FM2-0707-000CNPaper Sensor Assy
RM1-3238-000CNPARTITION PLATE ASS Y, CYAN
RM1-3237-000CNPARTITION PLATE ASS Y, MAGENTA
RM1-3235-000CNPARTITION PLATE ASS Y, YELLOW
WG8-5696-000CNPhoto interrupter, TLP1243
RM1-3250-000CNPHOTOSENSOR ASS Y
XD3-2200-102CNPIN, DOWEL
XD3-2300-142CNPIN, DOWEL
XD9-0240-000CNPIN, DOWEL
XD3-2300-202CNPIN, DOWEL
RC1-9238-000CNPLATE, CONTROL PANEL GROUNDING
RC1-9235-000CNPLATE, DRAWER GUARD
RC1-9190-000CNPLATE, FAN FIXING, FRONT
RL1-1216-000CNPLATE, FIXING MOTOR
RC2-1356-000CNPLATE, GROUNDING
4A3-1955-000CNPLATE, GROUNDING
4A3-4715-000CNPLATE, HINGE STOP
RC1-9326-000CNPLATE, HVT-A GUARD
FC5-6978-000CNPLATE, OPTION TRAY, FRONT
4A3-1779-000CNPLATE, ROTATION
RC1-9246-000CNPLATE, SENSOR, FRONT
FM2-1409-000CNPRESS MOTOR ASSY
FM2-0730-000CNPRESSURE ROLLER ASSEMBLY
FS6-0815-000CNPULLEY, 16T/GEAR, 32T
FU5-3086-000CNPULLEY, 20T
FS5-3576-000CNPULLEY, 30T
FS6-0814-000CNPULLEY, 32T/GEAR, 16T
FS5-3577-000CNPULLEY, 39T
FB3-7967-000CNRACK, FRONT
FC5-5436-000CNRACK, RAIL
FB3-7934-000CNRACK, REAR
RL1-1215-000CNRAIL, CASSETTE, RIGHT
RC1-8931-000CNRAIL, FIXING, FRONT
RC1-8939-000CNRAIL, FIXING, REAR
RL1-1213-000CNRAIL, LEFT, TOP
RC1-9206-000CNRAIL, REVERSE, REAR
RM1-3354-000CNREAR COVER MOUNT PLATE ASS Y
FM2-0763-000CNREAR END SENSOR ASSY
RM1-3618-000CNREAR LOWER CABLE
RM1-4415-000CNREAR RIGHT COVER ASS Y
RM1-3619-000CNREAR UPPER CABLE
Q3931-67909Reg 2nd transfr. Assy Kit and Service D
RM1-3310-000CNREGISTRATION 2ND TRNSFR. ASS Y
Q5950-67901Replacement-Black Print Cartouche, toner
RC1-8511-000CNRETAINER
RM1-3333-000CNRIGHT DOOR SUB ASS Y
RL1-1280-000CNRIGHT LOWER COVER ASS Y
RM1-3239-000CNRIGHT SIDE WALL ASS Y
XD2-3100-152CNRING, C, EXTERNAL
XD9-0234-000CNRing, E
Q3938-67968Roller Kit (150K life)
Q3938-67968-BURoller Kit (150K life)
4A3-1783-000CNROLLER, FOLDING
RC1-8567-000CNROLLER, PAPER PICK-UP
RL1-1289BULKROLLER, PAPER PICK-UP
RM1-4392-000CNROLLER, RETARD
FC5-4221-000CNROLLER, TRAY GUIDE
RU5-6035-000CNROLLER, TRAY GUIDE
RM1-4140-000CNSADDLE CONTROLLER PCB ASSY
FM2-0756-000CNSADDLE GUIDE ASSEMBLY
FM2-0737-000CNSADDLE MOTOR ASSY
RM1-4130-000CNSADDLE PAPER DELIVERY ASSY
RM1-4136-000CNSADDLE PAPER FEEDER ASSY
RM1-4109-000CNSADDLE PAPER FEEDER ASSY
RM1-4178-000CNSADDLE STAPLER ASSEMBLY
RM1-3450-000CNSCANNER ASS Y
Q3931-67907SCANNER ASSY Kit Part Number
RM1-3620-000CNSCANNER JOINT CABLE
XB2-8300-607CNSCREW M3X6
XA9-1495-000CNSCREW RS M3X6
XB1-2400-805CNSCREW, MACH, TRUSS HEAD, M4X8
FU5-9059-000CNSCREW, RS STEPPED, M3
XA9-1801-000CNSCREW, RS, M13X12
XA9-1449-000CNSCREW, RS, M3X8
XB4-5401-209CNSCREW, RS, M4X8
XB6-7303-005CNScrew, TP, M3x30
XA9-1469-000CNSCREW, TP, M3X6
XA9-1448-000CNScrew, TP, M4X8
XA9-1300-000CNScrew, TP, M4X8
XA9-1422-000CNSCREW, W/WASHER, M4X12
XA9-1504-000CNSCREW,RS,M3X8
XB1-2300-407CNSCREW:M3X4 TRUSS
XA9-1159-000CNScrew-TP M3x6
RK2-2376-000CNSENSOR UNIT, HUMIDITY
FM2-1417-000CNSENSOR/SWITCH ASSY
FC5-5542-000CNSHEET, ENTRANCE GUIDE
RC1-9232-000CNSHEET, FIXING CROSSMEMBER
FM2-1401-000CNSHUTTER H.P. SENSOR ASSY
FL2-0821-000CNSOLENOID
RC1-9233-000CNSPRING, LEAF
4S3-2117-000CNSPRING, TENSION
4S3-2116-000CNSPRING, TENSION
FS6-2582-000CNSPRING, TENSION
RU5-2822-000CNSPRING, TENSION
RU5-2796-000CNSPRING, TENSION
RC1-9244-000CNSPRING, TORSION
FB3-7980-000CNSPRING, TORSION
FC5-5005-000CNSPRING, TORSION
RU5-2825-000CNSPRING, TORSION
4G3-0769-000CNSTACK EJECTION MOTOR ASSY
RM1-4104-000CNSTACK TRAY ASSY
RM1-4101-020CNSTACK UPPER TRAY ASSY
FM2-0721-000CNSTAPLE ASSEMBLY
FM2-0722-000CNSTAPLER SUB ASSY
FL2-0846-000CNSTAPLER UNIT
RM1-4108-000CNSWING GUIDE ASSY
FM2-1423-000CNSWING PRESS SHAFT ASSY
RM1-3360-000CNSWITCH BACK COVER ASSY
RM1-4411-000CNT2 GUIDE ARM ASS Y
RM1-4402-000CNTAG PCB HOLDER ASS Y
XB4-7401-005CNTapping screw Truss Head M4x10
RK2-1363-000CNTHERMISTOR UNIT
RM1-3232-000CNTHERMO PILE CASE ASS Y
RM1-4418-000CNTONER CARTOUCHE, TONER DRIVE ASS Y
RM1-4417-000CNTONER CARTOUCHE, TONER DRIVE ASS Y
Q3931-67913Toner Cartouche, toner Drive Assy Kit and Serv
Q3931-67912Toner Cartouche, toner Drive Assy Kit and Serv
RM1-3385-000CNTONER MOTOR CABLE
RM1-3383-000CNTONER MOTOR CABLE
RL1-1284-000CNTOP COVER ASS Y
RM1-4121-000CNTOP DOOR ASSY(SS)(UPPER COVER ASSEMBLY)
RM1-3230-000CNTRANSFER CONTACT HOLDER ASS Y
Q3931-67920Tray 1 pick-up, retard roller Kit
Q3931-67919Tray 2 pick-up,feed roller Kit
FG3-2887-000CNTRAY DRIVER PCB ASSY
4A3-5931-000CNUNIVERSAL CASTER
4A3-6322-000CNUNIVERSAL CASTER
4G3-0210-000CNUPPER COVER LOCK ASSY
RM1-4131-000CNUPPER DELIVERY GUIDE ASSEMBLY
RM1-3640-000CNWASTE TONER SENSOR CABLE
RC2-1734-000CNWINDOW, LED

Caractéristiques techniques

HP Color LaserJet CP6015, CP6015N, CP6015DN, CP6015XH

Vitesse noir41 ppm
Vitesse couleur 41 ppm
Bac à papier500 feuilles
Ref toner noirCB380A
Capacité toner noir16500 pages
Ref toner couleur CB381A
Capacité toner couleur 21000 pages