Printer image

Votre imprimante laser HP LaserJet 4050, 4050T, 4050N, 4050TN
est en panne ?

Notre technicien peut intervenir sur site
pour la dépanner.

Nos spécialistes sont en mesure de prendre en charge toutes les pannes :

Indiquez-nous la panne rencontrée pour obtenir un diagnostic.

  • Défauts d’impression (traces, points, traits...)
  • Bourrages papier (départ papier, feuille froissée en accordéon...)
  • Message ou code erreur
  • Fuite de toner
  • Bruit anormal
  • Panne électronique
  • Paramétrage
  • Accessoire
  • Pièce détachée
  • Machine complète

... ou le code erreur qui s'affiche sur l'écran de votre imprimante.

Codes erreur rencontrés fréquemment sur l'imprimante
HP LaserJet 4050, 4050T, 4050N, 4050TN

Le code affiché sur votre imprimante est plus long que celui indiqué dans cette liste.
Par exemple si l'écran de l'imprimante indique un code 13.00.02, nous ne retenons que le début du code, c'est à dire 13.
Le code 13 renvoie à un type de problème, les chiffres qui suivent pouvant apporter une précision.

printer-icon

Code erreur 10 : Problème de mémoire consommable, puce HS


Code erreur 13 : Bourrage papier


Code erreur 41 : Format de papier inattendu


Code erreur 49 : Format de fichier incorrect (pdf ou autre) ou pb de firmware


Code erreur 50 ou Erreur Station fusion ou Remplacer kit de maintenance : Problème de four (kit de maintenance)


Code erreur 51 : Panne de moteur laser


Code erreur 57 : Panne de ventilateur


Code erreur 59 : Panne de moteur


Tableau de tous les codes erreur de la HP LaserJet 4050, 4050T, 4050N, 4050TN

11

- code :

11

- affichage :

11 Paper Out

- description :

Paper tray empty or not seated correctly. A buildup of toner on the edges of the tray which slide into the printer can sometimes cause problems. Take a sharp tool, like a razor blade and scrape the buildup off these edges.
Sensor Arm Stuck or Broken - check for free movement of the sensor arm. Sensor flag can get knocked out of place when a paper jam occurs and the tray is pulled out abruptly. Most times this can simply be reinstalled. If it's broken, you will need to replace the sensor flag.
Defective Tray Size Sensing or Configuration - Most trays have tabs which depress a series of switches when installed. Verify that the tabs aren't damaged and that the tray switches located in the printer are not damaged. You can depress these by hand and hear them click. Occasionally the contact for the micro switch will get bent and will have to be replaced. Also verify the configuration through the menus on the printer.
Defective Paper Control Sensor PCB - These do fail and will need to be replaced.

12

- code :

12

- affichage :

12 Printer Open

- description :

Top cover open or a broken tab on the cover assembly. On rare occasions a defective paper control assembly or actuator can cause this problem. Verify the tab on the cover is not broken.

13

- code :

13

- affichage :

13 Paper Jam

- description :

Check the paper, make sure it meets the paper specifications for your printer. Tractor feed paper with the edges ripped off doesn't seem to work very well. Extremely heavy or thick paper is also a problem. Check the HP paper specification guide for more info. Be careful with labels, use only labels designed to take the heat generated by the fuser assembly. Regular labels my "ooze" adhesive as they pass through the fuser assembly and literally gum up the works! Also check for any partially peeled labels, this can be a disaster if they come off inside the printer.
Is the paper size correct? Is the software set for the size you're using? Is the menu set for the size you're using? Check these items. If the software tells the printer to expect a different size (legal, A4, COM10) than the tray available, you will get an error. This can happen when printing a FAX document formatted for A4 size paper.
You could also have a defective or dirty exit sensor. Replace or clean as needed.
Make sure the paper cassettes are installed correctly. A buildup of toner on the edges of the tray which slide into the printer can sometimes cause problems. Take a sharp tool, like a razor blade and scrape the buildup off these edges.
Bad drive gears. Again on the LJII/III we are starting to see more and more failures of the gear drive assembly. A broken tooth on one gear is all it takes. Replace this as an assembly.
Listen for the motor operation, make sure it's operational. If not replace the motor or drive circuit as required.

14

- code :

14

- affichage :

14 No EP Cartridge

- description :

On the 4V/4MV check the toner cartridge micro switch on the High Voltage PCB - SW501.
Also on the 4V/4MV check the door open sensor (PS402) on the terminal board located under the transfer roller.
Can also be caused by a defective DC controller. Pretty rare though.

16

- code :

16

- affichage :

16 Toner Low

- description :

Toner cartridge is empty or toner in cartridge is not distributed evenly. Gently shake the toner cartridge both from side to side and from front to back. This can generally get you 100 or so more pages.
Bad or dirty cartridge contacts. Look for the conductive contacts on the cartridge and the corresponding contacts in the printer and make sure they are clean and free of contaminants.

18

- code :

18

- affichage :

18 MIO Not Ready

- description :

The printer is not connected to a LAN when it's expecting to see a LAN. Terminate the port on the printer with a BNC T and two 50 ohm termination's.
The MIO card is defective or maybe just not seated correctly. Remove the card and reseat it, try swapping with a know good card from another printer. Replace if necessary.

20

- code :

20

- affichage :

20 Memory Overflow

- description :

A large print job has exceeded the memory capacity of the printer. Verify that the SIMMS or memory cards are seated. Add more memory or simplify the print job.

21

- code :

21

- affichage :

21 Print Overrun

- description :

The print job is to complex. Simplify the job by removing font changes etc.
The print job is to complex, enable page protect from the control panel and from the software. You may need additional memory.

22

- code :

22

- affichage :

22 Error I/O

- description :

Config Error/ Par I/O Error/MIO Error
I/O configuration for the computer or printer is incorrect. Configure is properly.
Check I/O Cable, it could be the wrong cable or damaged.
How about the I/O port - damaged, seated properly, pins not bent?
The computer and printer aren't talking because of improper signal protocols. Could be a bad cable or loose connection or just a poor quality cable. Reseat the cable and use only high quality IEEE 1284 compliant cables.

23

- code :

23

- affichage :

23 I/O Not Ready

- description :

The I/O card is not accepting data. May not be connected - check cabling - or it may be defective. Reseat the card and if available, swap with a known working card. Watch the termination's on the network cabling.

24

- code :

24

- affichage :

24 Job Memory Full

- description :

The print job is too complex to be processed. Laser printers are page printers and require the entire page to be processed before beginning to print. Simplify the print job by removing font changes and/or graphics. Add more memory.

30

- code :

30

- affichage :

30

- description :

An I/O time-out or a prompt for user interaction like a manual feed has been exceeded. Check the I/O connections and make sure the proper media is being used.
This is an unexpected PostScript firmware error. Reseat the PostScript SIMM and/or replace it
PCL file was sent to the printer while in PostScript mode or the PostScript file contains bad data, or you have experienced and application error (crash). You need to check the configuration of your printer and drivers, reset the printer, try issuing an initialization command from within the application. May need to reload your PostScript print driver file.

40

- code :

40

- affichage :

40

- description :

Make sure computer and printer are set to the same baud rates. Reset as needed.
Check the MIO card, remove, clean contacts, reinstall. Replace if defective
An abnormal connection break may have occurred during data transfer - Press Continue or Go to clear this error message.

43

- code :

43

- affichage :

43

- description :

This indicates a communication problem between the formatter PCA and an optional interface installed (such as a network card). Remove and reseat the optional interface card. If the problem continues, remove the optional interface card and set the printer for standard parallel interface by taking off-line and holding down "Menu" key for 5-10 seconds. Scroll through items until "I/O =" appears and use the +/- key to affichage parallel and the enter key to select. Then put the printer back online and send a test job from the host computer via the parallel cable. If this is successful, you have a problem with the optional I/O card and should replace it or reset it.

50

- code :

50

- affichage :

50 Fuser Error

- description :

defective heater, termistor, termoswich, triac

51

- code :

51

- affichage :

51 Loss of
beam detect

- description :

Improperly seated toner cartridge - remove and reinstall
Laser shutter blocked or damaged
Damaged fiber optic cable
Defective Laser PCA - replace
Faulty Laser Scanner Cable Connectors - Remove and Reseat connectors
Defective Laser Scanner Assembly - Replace

52

- code :

52

- affichage :

52

- description :

incorrect scanner speed and is generally the same as an error 51.

55

- code :

55

- affichage :

55

- description :

On IIISi/4Si Printers this is due to the DC controller not receiving the proper information upon startup. Check the connectors on the DC controller and power supply. If you don't hear the motor immediately and you don't have a paper jam, change the power supply.

57

- code :

57

- affichage :

57

- description :

Main motor problem, check gear train for binding. Check connections to DC controller - replace main motor
Check gear train for binding. Replace main motor

58

- code :

58

- affichage :

58

- description :

Check the fan cable - reseat cable or replace fan
Defective DC controller board - replace

59

- code :

59

- affichage :

59 Add Memory

- description :

Not enough memory for PostScript option. Verify SIMM's are seated properly, replace any defective

79

- code :

79

- affichage :

79

- description :

Software/drivers, Memory PCA's, Font-Macro-Personality Cartridges, option I/O Cards. Defective toner cartridge in the Laserjet 4 Plus only. Remove any accessories (font cartridges, memory PCA's, SIMMs, etc.) plugged into the formatter card and try again. If the problem persists and is application specific, verify proper setup with application vendor.
Defective Formatter PCA - Replace with known operational board and try again.

80

- code :

80

- affichage :

80

- description :

Improper MIO connection - look at pins on formatter MIO connection
Defective MIO Card - Replace card
Defective Formatter Card - Replace card

89

- code :

89

- affichage :

89

- description :

The PostScript ROM's have bent or broken pins inspect the pins and reseat if necessary
Check to see that the ROM SIMM's are in the proper location and oriented properly
This can also be a temporay error, try power cycling the printer
The PostScript ROM's/SIMM are defective

Le problème provient probablement d'une pièce à remplacer.

Pièces d'usures remplacées frequemment sur la HP LaserJet 4050, 4050T, 4050N, 4050TN

Nomenclature des pièces détachées de la HP LaserJet 4050, 4050T, 4050N, 4050TN

C8055-69001 500 Bac a papier
C8056-69001 500 SHEET TRAY
J6057-69001 615N 10/100 EIO
J7934-69011 620N 10/100 PRINT SERVER SVC
RB1-9012-000CN ARM, LIFTER, LEFT
RB1-9013-000CN ARM, LIFTER, RIGHT
RB1-8787-000CN ARM, MP PAPER SE
RB2-2387-000CN ARM, MP TRAY RET
RB2-2408-000CN ARM, OUTPUT KICK
RB2-2409-000CN ARM, OUTPUT KICK
RB1-8910-000CN ARM, TRAY SENSIN
RB1-8879-000CN ARM, TRAY SENSIN
RB1-9095-020CN ARM,WEIGHT
1RR6-0001 ASIC:LIFESAVER
C4251-69001 ASSEMBLY:FORMATTER ASSEMBLY
C4251-60101 ASSEMBLY:FORMATTER CASE
C4118-69011 ASSEMBLY-FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE110V
C4118-69012 ASSEMBLY-FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE220V
RG5-2655-360CN Assembly-MP Pick-Up
RG5-2651-090CN Assembly-Paper Feed
RF5-3116-000CN Assembly-Sensor Lever
RG5-2652-170CN ASSY REGISTRATION
RG5-4283-BULK ASSY TRANSFER ROLLER (PATIN, GALET D’ENTRAINEMENT)
RG5-4283BULKM ASSY TRANSFER ROLLER (PATIN, GALET D’ENTRAINEMENT)
RG5-2643-160CN ASSY, PAPER FEED GUIDE
C4233-60101 ASSY: DUST COVER 2x250
C4234-60101 ASSY: DUST-OPT 500
C4232-60101 ASSY:DUST COVER-1x500
C4118-60103 ASSY:FMTR CASE
C4119-67901 ASSY:PAPER GUIDE CLIPS
5063-1256 ASSY-CBL,IEEE-1284, 2M A-B
5063-1257 ASSY-CBL,IEEE-1284, 3M A-B
C4125-67901 ATRAY,SHEET LETTE
RS5-1179-000CN BEARING, TRANSPO
J4135-60002 BERT EIO: Serial,LocalT
C4118-99027 Bundle Manual-French
RB1-8688-000CN BUTTON, ENGINE T
RB1-8849-030CN Button-Switch
RB1-8689-000CN CABLE HOLDER
RG5-3705-000CN CABLE, EP COVER
RG5-3709-000CN CABLE, MAIN MOTO
RG5-3700-000CN CABLE, MP TRAY S
RG5-3706-000CN CABLE,FEED/REGIT
RG5-3703-000CN CABLE,PAPER FEED
RG5-3710-000CN CBL FEEDER MOD
C4251-60116 CD ROM Assembly-LJ4050 Service
C4251-60106 CD ROM ASSY:SERVICE AND TRAINING
C4251-60104 CD ROM:USERS GUIDE/WORLDWIDE
C4251-60107 CD:USERS GUIDE
C4251-67903 CHSD DIMM KIT (6.29 FIRMWARE CODE)
C4118-61103 CLASSROOM:HW TRAINING KIT
RB1-8848-000CN CLIP, LEFT SIDE
RB1-8860-000CN CLIP, RIGHT SIDE
VS1-6176-006CN CONNECTOR,6P
RB1-8877-000CN COUPLER, PICKUP
RG5-2677-000CN COVER ASSY,FEEDE
RG5-2679-000CN COVER ASSY,FEEDE
RG5-2678-000CN COVER ASSY,FEEDE
RG5-2680-000CN COVER ASSY,FEEDE
RB2-2404-000CN COVER PLATE:BRUNDAGE
RB2-2386-000CN COVER, ENVELOPE
RB1-8907-000CN COVER, FEEDER PC
RF5-1876-000CN COVER:LEFT-WITH CONNECTOR
5851-2583 Cover-EIO
5081-9474 DIMM INSTALLATION SHEET
5041-9228 DIMM:FIRMWARE
1818-6729 DRAM 1MX16 60 NS SOJ EDO 42-SOJ 3.3V
C8054-69001 Unité recto verso
C8053-69002 ENVELOPE FEEDER
C8053-69001 ENVELOPE FEEDER
C4118-69003 EXC:100V FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE
C4118-69006 EXC:100V PCA
C4118-69001 EXC:110V MAIN KT
C4118-69004 EXC:220V FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE
C4118-69002 EXC:220V MAIN KT
C4118-69007 EXC:220V PCA
C4123-69001 EXC:DPLX ASSY
C4122-69001 EXC:ENV FEEDER
C4118-69005 EXC:LASER SCNR
C7833-40015 EXIT TRAY
RH7-1334-000CN Fan
RB1-8706-000CN FAN COVER
RH7-1361-000CN FAN, UNITÉ RECTO VERSO
RH7-1335-000CN FAN:MAIN COOLING
RF5-2490-000CN FEED/SEPARATION
RB9-0379-000CN Film Fixing
RB9-0379-BULK FILM FIXING SLEEVE-LJ 4000
RB9-0379BULKM FILM FIXING SLEEVE-LJ 4000
C4185-60001 FORMATTER:SMOKEY
C4251-40022 FRONT PANEL OVERLAY-AR
C4251-40010 FRONT PANEL OVERLAY-CZ
C4251-40016 FRONT PANEL OVERLAY-DN
C4251-40017 FRONT PANEL OVERLAY-DU
C4251-40019 FRONT PANEL OVERLAY-FI
C4251-40002 FRONT PANEL OVERLAY-FRENCH
C4251-40014 FRONT PANEL OVERLAY-GE
C4251-40018 FRONT PANEL OVERLAY-GR
C4251-40006 FRONT PANEL OVERLAY-HU
C4251-40003 FRONT PANEL OVERLAY-ITALIAN
C4251-40023 FRONT PANEL OVERLAY-JP
C4251-40011 FRONT PANEL OVERLAY-KO
C4251-40005 FRONT PANEL OVERLAY-NO
C4251-40008 FRONT PANEL OVERLAY-PO
C4251-40004 FRONT PANEL OVERLAY-PORTUGUESE
C4251-40009 FRONT PANEL OVERLAY-RU
C4251-40012 FRONT PANEL OVERLAY-SC
C4251-40007 FRONT PANEL OVERLAY-SW
C4251-40024 FRONT PANEL OVERLAY-TI
C4251-40020 FRONT PANEL OVERLAY-TK
C4251-40015 FRT PNL OVRLY-SP
RG5-2661-000CN Four, unité de fusion, kit de maintenance110v
RG5-2661-020CN Four, unité de fusion, kit de maintenance110v
C4118-91027 GD:MAIN KT INSTL
C4118-91028 GD:SELF-PACED
RS5-0911-000CN GEAR, COUPLER
1RU5-0001 GRIN_B
RB1-8757-000CN GUIDE, CABLE, GE
RB1-8914-000CN GUIDE, PAPER, LO
RB1-8862-000CN GUIDE,FORMATTER/
RB1-8924-000CN GUIDE,LOWER CASS
RB1-8704-030CN Holder-Cable
C4251-67904 HPCS DIMM Kit (6.32 version code)
1818-7613 IC 32M-BIT ROM 100-NS CMOS
1818-7419 IC 32M-BIT ROM 120-NS CMOS
1821-3697 IC DRVR BICMOS/LVT OCTL
1821-2621 IC MIPS VR4300
C3974-60211 IC ROM
C3974-60221 IC ROM (3.76)
1821-3696 IC TRANSCEIVER CMOS BIDIR
C4118-91110 INST:FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCERETUR
RB1-8838-000CN INSULATION SHEET:BRUNDAGE
J4135-69001 JETDIRECT CONN CARD
5081-9500 KIT: LJ UNIVERSITY SERVICE TRAINING
C4118-67905 KIT: VIDEO LJ4000 NTSC
C4118-67902 KIT:110V MAINT
C4118-67903 KIT:220V MAINT
C4119-67902 KIT:COUPLER WITH LOWER LIMIT GUIDES
C4118-67907 KIT:FRONT COVER AND SPRING
C4251-67905 Kit:HPCS Smokey DIMM, 6.36
C4251-67901 KIT:PSD DIMM
C4103-67901 KIT:SMO FAST INFRARED DONGLE
C4118-61101 KIT:STUDENT/NTSC
C4118-61102 KIT:STUDENT/PAL
C4118-67904 KIT:VIDEO LJ4000 PAL
C8049-67902 Kit-LJ4100/4050 Training
C4118-00026 LABELS:PAPER JAM (4)
RB1-8700-000CN LASER SHUTTER AR
RB1-8846-000CN LATCH, REAR TRAY
RB1-8827-000CN LEAF SPRING
RG5-2688-000CN LEFT FRAME ASSEMBLY
RB1-9033-000CN LEVERS, TRAY SEN
RB1-9034-000CN LEVERS, TRAY SEN
RG5-3822-000CN LOWER CASSETTE C
RG5-3821-000CN LOWER CASSETTE L
C7833-40013 LOWER FOLD CHUTE
RH7-1331-000CN MAIN MOTOR ASSEM
C4251-99001 MANUAL BUNDLE:1X500-EN
C4251-99002 MANUAL BUNDLE:1X500-FR
C4251-99005 MANUAL BUNDLE:1X500-SP
C4251-91003 MANUAL:SERVICE
RG5-2682-000CN MIDDLE FRAME ASSEMBLY(2X250)
C4118-99071 ML BDL:1X500-AR
C4118-99068 ML BDL:1X500-CZ
C4118-99057 ML BDL:1X500-DN
C4118-99056 ML BDL:1X500-DU
C4118-99051 ML BDL:1X500-EN
C4118-99058 ML BDL:1X500-FI
C4118-99052 ML BDL:1X500-FR
C4118-99054 ML BDL:1X500-GE
C4118-99072 ML BDL:1X500-GR
C4118-99073 ML BDL:1X500-HE
C4118-99067 ML BDL:1X500-HU
C4118-99053 ML BDL:1X500-IT
C4118-99074 ML BDL:1X500-JP
C4118-99065 ML BDL:1X500-KO
C4118-99059 ML BDL:1X500-NO
C4118-99061 ML BDL:1X500-PG
C4118-99062 ML BDL:1X500-PO
C4118-99066 ML BDL:1X500-RU
C4118-99069 ML BDL:1X500-SC
C4118-99055 ML BDL:1X500-SP
C4118-99060 ML BDL:1X500-SW
C4118-99064 ML BDL:1X500-TC
C4118-99070 ML BDL:1X500-TI
C4118-99063 ML BDL:1X500-TK
C4119-99047 ML BDL:2X250-EN
C4118-91026 MNL:SERVICE
RG5-3718-000CN MP PICKUP ROLLER (PATIN, GALET D’ENTRAINEMENT)
C4118-99024 ORDER C4118-91026
C4251-40021 Overlay Hebrew
C4251-40001 Overlay ENGLISH
RB1-9045-000CN PANEL, UNITÉ RECTO VERSO
RB1-9047-000CN PANEL, UNITÉ RECTO VERSO
RB1-8858-000CN PANEL, FMTR COVE
RB1-8805-000CN PANEL, FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCECOV
RB2-2400-000CN PANEL, LEFT DUPL
RB2-2401-000CN PANEL, RIGHT DUP
RG5-2687-000CN PANEL,CASSETTE-LOWER
RG5-2648-110CN PAPER DELIVERY ASSY
RG5-2683-000CN PAPER PICKUP DRI
RG5-2684-000CN PAPER PICKUP DRI
RG5-2690-000CN PAPER PICKUP DRI
RG5-2672-140CN PAPER PICKUP DRIVE ASSEMBLY
RG5-2672-120CN PAPER PICKUP DRIVE ASSEMBLY
C4118-69009 PCA ENGINE CONTROLLER 110V
C4118-69010 PCA ENGINE CONTROLLER 220V
C4104-60001 PCA:BRN-DGHTR CD
C4079-60001 PCA:FMTR-BRUNDGE
WG8-5849-000CN Photo-Interrupter
WG8-5624-000CN Photo-Interrupter
RB1-8957-000CN PICKUP ROLLER (PATIN, GALET D’ENTRAINEMENT)
RF5-2484-000CN PICKUP ROLLER (PATIN, GALET D’ENTRAINEMENT) AS
RB2-2405-000CN PLATE, CONTROL P
RF5-2496-000CN PLATE, GEAR
RB1-8708-000CN PLATE, GEAR PLAT
RB1-8747-000CN PLATE, REGISTRAT
RB1-8927-000CN PLATE,LOWER CASS
C7833-60102 POWER SUPPLY:24V
RB1-8851-000CN POWER SWITCH ACT
RF5-1867-000CN PRE-TRANSFER GRO
RG5-2653-020CN PRINTER DRIVE AS
8120-6802 PWR-CORD OPT-902 3-COND 2.3-M-LG ROHS
RG5-2642-000CN REGISTRATION/FEE
RB1-8690-000CN RET TONER SEN SP
C7833-40014 REVERSIBLE BASE
C4254AR Rmkt HP LaserJet 4050 TN Printer
RF5-1885-000CN ROLLER (PATIN, GALET D’ENTRAINEMENT)
RB1-8865-000CN ROLLER (PATIN, GALET D’ENTRAINEMENT), PICKUP
RB1-8794-030CN ROLLER (PATIN, GALET D’ENTRAINEMENT), PRESSURE
RB9-0684-000CN Roller (Patin, galet d’entrainement)-Pressure
RB1-8703-000CN SCREW, MODULE AT
0515-2908 SCREW-MACH M3 X 0.5 6MM-LG PAN-WSHR ROHS
0515-2906 SCREW-MACH M3 X 0.5 8MM-LG PAN-HD ROHS
J4135-61001 SMO KIT
C4251-67902 SMO KIT:MANUAL/CD ROM SERVICE BUNDLE
RH7-5172-000CN SOLENOID, MP DRI
RB1-8693-000CN SPRING, EP DRUM
RS5-2967-000CN SPRING, IDENTIFI
RB1-8847-000CN SPRING, REAR TRA
RB1-8702-000CN SPRING, SHUTTER
RB1-8695-000CN SPRING, TONER SE
RS5-2632-000CN SPRING,PICKUP
RB1-8694-000CN STRAP, INTERLOCK
RG5-2645-000CN SUPPORT, TOP COV
RB1-8671-000CN SUPPORT,TOP COVE
5184-5218 TONER HP LJ4000
RG5-2663-090CN Top Cover Assy.(Grizzly,Smokey,Brundage)
RG5-4283-000CN TRANSFER ROLLER (PATIN, GALET D’ENTRAINEMENT)
C4126A Tray 250-SHT LTR (Universal)
RB1-8844-000CN Tray Rear Extension
RB1-8928-000CN TRAY IDENTIFIER
RB1-9088-000CN TRAY, ENVELOPE F
RB1-8843-000CN TRAY, REAR
C4126-67901 TRAY,SHEET LETTE
RG5-2648-000CN UPPER DLVRY RLLR
C7833-40012 UPPER FOLD CHUTE
RF5-2511-000CN WEIGHT, ENVELOPE

Caractéristiques techniques

HP LaserJet 4050, 4050T, 4050N, 4050TN

Vitesse noir 17 ppm
Bac à papier 500 feuilles
Ref toner noir C4127X
Capacité toner noir 10000 pages