Printer image

Votre imprimante laser HP Color LaserJet CM4730, CM4730F, CM4730FSK
est en panne ?

Notre technicien peut intervenir sur site
pour la dépanner.

Nos spécialistes sont en mesure de prendre en charge toutes les pannes :

Indiquez-nous la panne rencontrée pour obtenir un diagnostic.

  • Défauts d’impression (traces, points, traits...)
  • Bourrages papier (départ papier, feuille froissée en accordéon...)
  • Message ou code erreur
  • Fuite de toner
  • Bruit anormal
  • Panne électronique
  • Paramétrage
  • Accessoire
  • Pièce détachée
  • Machine complète

... ou le code erreur qui s'affiche sur l'écran de votre imprimante.

Codes erreur rencontrés fréquemment sur l'imprimante
HP Color LaserJet CM4730, CM4730F, CM4730FSK

Le code affiché sur votre imprimante est plus long que celui indiqué dans cette liste.
Par exemple si l'écran de l'imprimante indique un code 13.00.02, nous ne retenons que le début du code, c'est à dire 13.
Le code 13 renvoie à un type de problème, les chiffres qui suivent pouvant apporter une précision.

printer-icon

Code erreur 10 : Problème de mémoire consommable, puce HS


Code erreur 13 : Bourrage papier


Code erreur 41 : Format de papier inattendu


Code erreur 49 : Format de fichier incorrect (pdf ou autre) ou pb de firmware


Code erreur 50 ou Erreur Station fusion ou Remplacer kit de maintenance : Problème de four (kit de maintenance)


Code erreur 51 : Panne de moteur laser


Code erreur 57 : Panne de ventilateur


Code erreur 59 : Panne de moteur


Tableau de tous les codes erreur de la HP Color LaserJet CM4730, CM4730F, CM4730FSK

10.XX.YY

- code :

10.XX.YY

- affichage :

10.XX.YY Supplies Error

- description :

A 10.XX.YY Supplies Error indicates either an error with one of the print cartridges or a notification of Override at out or Color Supply Out settings. The values of XX are: • 00 = memory error on supply • 10 = memory tag missing • 30 = non-HP supply in use • 32 = unauthorized supply in use • 70 = cartridge-out override activated (Override In Use) • 71 = monochrome printing after color cartridge out activated (Printing Black Only) • 80 = cartridge-out override deactivated because user limit reached (Override Not In Use) • 81 = monochrome printing after color cartridge out deactivated (Not Printing Black Only) • 88 = cartridge-out override deactivated because maximum use/wear limit reached (Override Not In Use) • 89 = cartridge-out override deactivated because cartridge out of toner (Override Not In Use) • 90 = replace cartridge (Replace <color> Cartridge) • 92 = cartridge not engaged
For errors 70 through 92, the main description appears only in the event log and is not posted on the control panel. The control-panel message is indicated in parentheses. The values of YY are: • 00 = black print cartridge • 01 = cyan print cartridge • 02 = magenta print cartridge • 03 = yellow print cartridgep

11.XX

- code :

11.XX

- affichage :

11.XX Internal clock error

- description :

This message is affichageed when there is a problem with the real-time clock on the formatter board.
11.01 = Dead clock battery 11.02 = Dead real-time clock

13.01.00

- code :

13.01.00

- affichage :

13.01.00 JAM IN TRAY 1

- description :

Paper is jammed in tray 1.

13.01.11

- code :

13.01.11

- affichage :

13.01.11 JAM INSIDE LOWER RIGHT DOOR

- description :

There is a paper jam inside the lower right door, or the paper did not feed from the paper tray.

13.02.00

- code :

13.02.00

- affichage :

13.02.00 JAM INSIDE RIGHT DOORS

- description :

Paper is jammed inside the right doors. The trailing edge was not detected by sensor SR12 after the specified time.

13.05.00

- code :

13.05.00

- affichage :

13.05.00 JAM INSIDE RIGHT DOORS

- description :

Paper is jammed inside the right doors. The trailing edge was not detected by sensor SR12 after the specified time.

13.06.00

- code :

13.06.00

- affichage :

13.06.00 JAM INSIDE UPPER RIGHT DOOR

- description :

There is a paper jam inside the right doors.

13.09.00

- code :

13.09.00

- affichage :

13.09.00 JAM INSIDE FRONT SMALL DOOR

- description :

Paper is jammed inside the front small door.

13.11.00

- code :

13.11.00

- affichage :

13.11.00 JAM INSIDE UPPER RIGHT DOOR

- description :

Paper is jammed inside the upper right door. There is a jam in the oblique roller area between sensor SR8001 (paper reversing sensor) and SR12 (top of page sensor), or in the fuser.

13.12.07

- code :

13.12.07

- affichage :

13.12.07 Jam In Stapler

- description :

The stapler could not finish its cycle but was able to return to the home position If the stapler drive does not return to home position (HP) during the normal cycle, the stapler/stacker driver signals M1304 (stapler motor) to rotate once in reverse. If the HP signal is now detected, the stapler/ stacker driver sends a signal to the formatter that a staple jam is present.

13.12.08

- code :

13.12.08

- affichage :

13.12.08 Jam In Left Accessory

- description :

Stay jam in accumulator. Paper sensor PS 1302 stayed activated longer than expected. This signal is generated by sensor PS1302 (delivery sensor). PS1302 is located just before the delivery rollers. In order to reach or see the sensor arm, lift the upper delivery rollers and upper paper-path guide plate. You will now be able to see and toggle the sensor arm activating PS1302.

13.12.09

- code :

13.12.09

- affichage :

13.12.09 Jam In Left Accessory

- description :

Stay jam at the entrance to the stapler/ stacker. Sensor PS1301 stayed activated longer than expected. This signal is generated by sensor PS1301 (paper-inlet sensor). PS1301 is located under the lower-entrance guide plate with the sensor arm extending up through the guide plate and into the paper path.

13.12.10

- code :

13.12.10

- affichage :

13.12.10 Jam In Left Accessory

- description :

Delay jam in entry. Paper did not arrive at the paper-inlet sensor PS1301 within the expected time. This signal is generated from sensor PS1301 (paper-inlet sensor). PS1301 is located under the lower entrance guide plate with the sensor arm extending up through the guide plate and into the paper path.

13.12.11

- code :

13.12.11

- affichage :

13.12.11 Jam In Left Accessory

- description :

Initial jam. At power on, paper was present at the entrance of the stapler/stacker at sensor PS1301. This signal is generated by sensor PS1301 (paper-inlet sensor). PS1301 is located under the lower entrance guide plate with the sensor arm extending up through the guide plate and into the paper path.

13.13.00

- code :

13.13.00

- affichage :

13.13.00 JAM INSIDE RIGHT DOORS

- description :

Paper is jammed inside the right doors. The front edge did not reach sensor SR1 within the specified time after reaching sensor SR12.r unit.

13.21.00

- code :

13.21.00

- affichage :

13.21.00 JAM IN TRAY X

- description :

There is a paper jam inside the upper right door or inside the fusing unit.

13.30.00

- code :

13.30.00

- affichage :

13.30.00 JAM INSIDE DRAWER BELOW TRAY 1

- description :

Paper is jammed inside the drawer.

13.31.00

- code :

13.31.00

- affichage :

13.31.00 JAM INSIDE UPPER RIGHT DOOR

- description :

Paper is jammed inside the upper right door. There is a jam in the oblique roller area between sensor SR8001 (paper reversing sensor) and SR12 (top of page sensor).

13.XX.YY

- code :

13.XX.YY

- affichage :

13.XX.YY JAM INSIDE OUTPUT ACCESSORY BRIDGE

- description :

Paper is jammed inside the output accessory bridge.

20

- code :

20

- affichage :

20 INSUFFICIENT MEMORY

- description :

The MFP received more data than can fit in the available memory. You might have tried to transfer too many macros, soft fonts, or complex graphics.

21

- code :

21

- affichage :

21 PAGE TOO COMPLEX

- description :

The page formatting process was not fast enough for the MFP.

22

- code :

22

- affichage :

22 EMBEDDED I/O BUFFER OVERFLOW

- description :

Too much data was sent to the embedded HP Jetdirect print server.

30.00.01

- code :

30.00.01

- affichage :

30.00.01

- description :

Scanner communication error. The formatter is unable to communicate with the scanner.

30.01.01

- code :

30.01.01

- affichage :

30.01.01

- description :

The flatbed scanner cover is open. This is a status message only.

30.01.02

- code :

30.01.02

- affichage :

30.01.02

- description :

A paper jam has occurred in the ADF paper path.

30.01.03

- code :

30.01.03

- affichage :

30.01.03

- description :

The ADF could not pick up the paper. If the paper does not pass the paper-presence sensor, it will be reported as an ADF paperpick error.

30.01.06

- code :

30.01.06

- affichage :

30.01.06

- description :

The scanner fan, located at the base of the scanner assembly, has failed. It operates whenever the scanner lamp is illuminated or whenever the scanner flatbed motor is rotating. The fan also operates during the MFP initialization sequence.

30.01.07

- code :

30.01.07

- affichage :

30.01.07

- description :

A communication error has occurred in the scanner.

30.01.08

- code :

30.01.08

- affichage :

30.01.08

- description :

Carriage home-position error. The carriage did not pass the home-position sensor within the allotted amount of time.

30.01.10

- code :

30.01.10

- affichage :

30.01.10

- description :

The ADF fan is not operating. This fan operates only during the ADF scan process.

30.01.15

- code :

30.01.15

- affichage :

30.01.15

- description :

The scanner initialization failed.

30.01.18

- code :

30.01.18

- affichage :

30.01.18

- description :

An error occurred on the scanner PCB.

30.01.19

- code :

30.01.19

- affichage :

30.01.19

- description :

An error has occurred in the scanner lamp.

30.01.22

- code :

30.01.22

- affichage :

30.01.22

- description :

A fatal hardware error has occurred in the scanner.

30.01.23

- code :

30.01.23

- affichage :

30.01.23

- description :

A scanner calibration error has occurred.

30.01.24

- code :

30.01.24

- affichage :

30.01.24

- description :

The ADF jam-access door is open.

30.01.25

- code :

30.01.25

- affichage :

30.01.25

- description :

A general error has occurred in the scanner ADF. This error is most likely a memory corruption error.

30.01.29

- code :

30.01.29

- affichage :

30.01.29

- description :

The ADF output bin is full.

30.01.36

- code :

30.01.36

- affichage :

30.01.36

- description :

The scanning firmware upgrade failed. The MFP automatically tires to upgrade the firmware again the next time the MFP is power cycled.

40

- code :

40

- affichage :

40 EMBEDDED I/O BAD TRANSMISSION

- description :

A connection with the embedded Jetdirect print server has been broken.

41.3

- code :

41.3

- affichage :

41.3 LOAD TRAY XX <TYPE> <SIZE>

- description :

The specified tray is loaded with media that is longer or shorter in the feed direction than the size adjusted for the tray.

41.5

- code :

41.5

- affichage :

41.5 Unexpected Type In Tray <X>

- description :

The printer senses a different media type in the media path than configured in the tray.

49.XXXXX

- code :

49.XXXXX

- affichage :

49.XXXXX ERROR

- description :

A critical firmware error has occurred that caused the processor on the formatter to abort operation. This type of error can be caused by invalid print commands, corrupt data, or invalid operations. In some cases, electrical noise in the cable can corrupt data during transmission to the printer. Other causes include poor-quality parallel cables, poor-connections, or home-grown programs. On rare occasions, the formatter is at fault.

50.X

- code :

50.X

- affichage :

50.X FUSER ERROR

- description :

A fuser error has occurred. The following are specific fuser errors: 50.1: A low fuser temperature error has occurred in the main thermistor. 50.2: A fuser warmup service error has occurred. 50.3: A high fuser temperature error has occurred in the main thermistor. 50.6: An open fuser error has occurred. 50.7: A fuser pressure release mechanism failure has occurred. 50.8: Low fuser sub-thermistor temperature 50.9: High fuser sub-thermistor temperature The error might be due to an inadequate power supply, inadequate line voltage, or a problem with the fuser.

51.1Y

- code :

51.1Y

- affichage :

51.1Y Printer Error

- description :

A laser error has occurred. 51.10 = Black 51.11 = Cyan 51.12 = Magenta 51.13 =Yellow

51.2Y

- code :

51.2Y

- affichage :

51.2Y Printer Error

- description :

A laser beam error has occurred. 51.20 = Black 51.21 = Cyan 51.22 = Magenta 51.23 = Yellow

52.XY

- code :

52.XY

- affichage :

52.XY ERROR

- description :

A printer error has occurred.
X Description 00 = Scanner error 01 = Scanner startup error 02 = Scanner rotation error Y Description 0 = Black 1 = Cyan 2 = Magenta 3 = Yellow

53.XY.ZZ

- code :

53.XY.ZZ

- affichage :

53.XY.ZZ CHECK RAM DIMM SLOT <X>

- description :

A memory error has occurred.
X DIMM Type 1 = RAM
Y Device Location 1 = DIMM Slot 1 2 = DIMM Slot 2
ZZ Error Number 00 = Unsupported memory 01 = Unrecognized memory 02 = Unsupported memory size 03 = Failed RAM test 04 = Exceeded maximum RAM size 05 = Invalid DIMM speed

54.XX

- code :

54.XX

- affichage :

54.XX Printer Error

- description :

54 errors indicate sensor abnormalities. Sensor abnormalities are caused by failed or black sensors, or sensors that report results outside of an expected range. NOTE: Some 54 errors do not stop the printing process and are noted on the event log but not on the control panel. 54.01 = environmental temperature sensor output is abnormal (appears only in the event log) 54.05 = Media sensor failure (appears only in the event log) 54.07 = yellow drum phase (home) position sensor 54.08 = magenta drum phase (home) position sensor 54.09 = cyan drum phase (home) position sensor 54.0A = black drum phase (home) position sensor 54.0B = Density Sensor Out of Range 54.0C = Halftone Calibration 54.0D = Halftone Calibration Diffusion 54.0F = CPR Out of Range NOTE: Errors 07 through 0F appear only in the event log and printing continues.

55.XX.YY

- code :

55.XX.YY

- affichage :

55.XX.YY DC CONTROLLER ERROR

- description :

A printer command error has occurred. Values of XX are: 01 - DC controller memory error 02 - DC controller memory error 03 - No engine response 04 - Communication error 05 - RFU error

56.XX

- code :

56.XX

- affichage :

56.XX ERROR

- description :

A printer error has occurred. 56.01 = Input device 56.02 = Output device

57.XX

- code :

57.XX

- affichage :

57.XX ERROR

- description :

A printer fan error has occurred. 57.01 = Delivery fan 57.03 = Sub power supply fan 57.04 = Cartridge fan 57.05 = Duplex fan 57.06 = Control fan 2 57.07 = Control fan 1 57.08 = ETB fan 57.0A = Power supply fan 57.09 = Fuser fan

58.XX

- code :

58.XX

- affichage :

58.XX ERROR

- description :

A memory tag error was detected.
XX Description 58.03 = Memory controller PCB 58.04 = Memory controller PCB power supply

59.XY

- code :

59.XY

- affichage :

59.XY ERROR

- description :

A printer motor error has occurred.
X Description 0 = Motor error 1 = Motor startup error 2 = Motor rotation error 3 = Fuser motor startup error 4 = Fuser motor rotation error 5 = Image drum motor startup error 6 = Image drum motor rotation error 9 = ETB motor startup error A = ETB motor rotation error B = Developing disengaging motor startup error C = Developing disengaging motor rotation error Y Description 0 = Black or N/A 1 = Cyan 2 = Magenta 3 = Yellow

60.X

- code :

60.X

- affichage :

60.X ERROR

- description :

A tray lifting error has occurred, where X is the number of the tray. This typically happens when a tray is overfilled or the media is not properly aligned. 60.2 = tray 2 60.3 = tray 3 60.4 = tray 4

62

- code :

62

- affichage :

62 NO SYSTEM

- description :

No system was found.

64

- code :

64

- affichage :

64 ERROR

- description :

A scan buffer error occurred.

65.00.15

- code :

65.00.15

- affichage :

65.00.15 Output Device Failure

- description :

After the MFP boot process, the external device requested a new boot process. This can happen during an upgrade; the 24 V power goes off momentarily, which makes the stapler/stacker think it is initializing again. NOTE: During an upgrade of the external device, if the connection with the device is lost for 9 minutes, the firmware crashes with a 66.00.15 error and forces the user to reboot. It will then affichage a Resend external accessory firmware message.

65.12.01

- code :

65.12.01

- affichage :

65.12.01 Output Device Failure

- description :

The paddle (retainer) motor M1301 was not able to move the sensor flag to the home position detected by sensor PS1305. This signal is generated by sensor PS1305 (paddle home-position sensor). Sensor PS1305 is located on the rear frame of the stapler/stacker, between the two DC motors: M1301 Paddle motor, and M1303 Feed Motor.

65.12.02

- code :

65.12.02

- affichage :

65.12.02 Output Device Failure

- description :

Jogger-motor malfunction. The jogger home position could not be sensed by sensor PS1304. This signal is generated by sensor PS1304 (jogger home-position sensor). Sensor PS1304 is located on the jogger assembly and can be accessed after removing the front, rear, and top covers of the stapler/ stacker.

65.12.03

- code :

65.12.03

- affichage :

65.12.03 Output Device Failure

- description :

Staple-motor malfunction. The staple motor was unable to return to the home position as read by sensor PHOl1. This signal is generated by sensor PHOl1 (stapler home-position sensor). PHOl1 is located in the stapler assembly and cannot be serviced. If the stapler drive does not return to home position (HP) during the normal cycle, the stapler/stacker driver signals M1304 (stapler motor) to rotate once in reverse. If the HP signal is not detected, the stapler/stacker driver sends a signal to the formatter that the staple motor has malfunctioned.

65.12.34

- code :

65.12.34

- affichage :

65.12.34 Output Device Failure

- description :

Cooling fan failure. This failure is detected by the stapler/ stacker control board. If the rotation speed of the cooling fan is not normal for 5 seconds or longer, the stapler/stacker control board notifies the formatter of the problem.

65.12.35

- code :

65.12.35

- affichage :

65.12.35 Output Device Failure

- description :

Stapler malfunction. The stapler self-prime sensor PHOl2 did not activate. This signal is generated by sensor PHOl2 (staple-ready sensor). Sensor PHOl2 is located in the stapler assembly and cannot be serviced. When a new staple cartridge is installed, the stapler goes through the stapling motion 11 times in order to advance the first staple to the proper stapling position. If the staples are not advanced after 11 attempts, the control board notifies the formatter that self-priming has failed.

65.12.99

- code :

65.12.99

- affichage :

65.12.99 Output Device Disconnected

- description :

When the printer was turned on, the stapler/ stacker lost communication with the MFP.

66.12.33

- code :

66.12.33

- affichage :

66.12.33 Output Device Failure

- description :

The delivery-roller lift motor could not reach the home position as detected by sensor PS1303. This signal is generated by sensor PS1303 (delivery-roller disengaging sensor). PS 1303 is located behind the front cover and to the left of the stapler assembly.

68.X

- code :

68.X

- affichage :

68.X STORAGE ERROR SETTINGS CHANGED

- description :

One or more printer settings saved in the non-volatile storage device is invalid and has been reset to its factory default. Touch OK to clear the message. Printing can continue, but there may be unexpected behavior. 68.0 = onboard NVRAM 68.1 = removable disk (flash or hard)

69.X

- code :

69.X

- affichage :

69.X ERROR

- description :

A printer error has occurred. 69.0 = duplexer not functioning 69.1 = duplexer not functioning

8X.YYYY

- code :

8X.YYYY

- affichage :

8X.YYYY EIO ERROR

- description :

The EIO accessory card has encountered a critical error, as specified by YYYY.

99.XX.YY

- code :

99.XX.YY

- affichage :

99.XX.YY

- description :

This error occurs during a Remote Firmware Upgrade (RFU). The upgrade might have failed due to a failing component or because the existing firmware is the same as the firmware in the RFU.

Le problème provient probablement d'une pièce à remplacer.

Pièces d'usures remplacées frequemment sur la HP Color LaserJet CM4730, CM4730F, CM4730FSK

Nomenclature des pièces détachées de la HP Color LaserJet CM4730, CM4730F, CM4730FSK

RC1-4395-020CN OPC Grounding Spring
RM1-3131-070CN 110V Fuser kit (Four, unité de fusion, kit de maintenance)
J6073-61081 120G kit GPSC
Q7721-67951 128MB MEMORY DIMM
CB480-67911 2.5 inch 120GB Hard Disk Drive
RM1-3146-080CN 220V Fuser kit (Four, unité de fusion, kit de maintenance)
Q7722-67951 256MB MEMORY DIMM
Q7517-67913 2X500 BAC À PAPIER
R96-5062-000CN 2X500 Bac à papier
J6073-61341 40G Kit GPSC
PF2288-SVPNI ADF
PF2288-SVPNR ADF
PF2282P060NI ADF base
PF2288K161NI ADF base assembly
RC1-5646-000CN ARM, SWITCHING
RC1-5647-000CN ARM, SWITCHING
RM1-2109-000CN ASSEMBLY, MP TRAY
CB480-60126 Assembly-Control Panel
RM1-2346-000CN Assembly-DC Controller
RM1-2346-070CN Assembly-DC Controller
RM1-2346-090CN Assembly-DC Controller 1.63.10
5851-2587 Assembly-Face Plate ROHS
RM1-0036-020CN Assembly-Paper Pick-up Roller
PF2282K035NI ASY-HLD-REV
PF2282K043NI ASY-HLDR-R-MLR
PF2282K008NI ASY-HNG-R
PF2282K039NI ASY-K-FEED
PF2282K040NI ASY-SHUTTER
PF2282K042NI ASY-TRY
RM1-1676-000CN ATTRACTION CONTACT ASSY
RL1-0612-000CN BIN FULL SENSOR FLAG
RL1-0612-030CN BIN FULL SENSOR FLAG
RC1-4394-000CN -BLOCK, HIGH VOLTAGE TERMINAL-
IR4054P215NI Break-away cover
RC1-4325-000CN BUSHING
RC1-4345-000CN -BUTTON, TEST PRINT-
PF2282K165NI Cable - ADF to SCB
RM1-1638-000CN -CABLE, SENSORS-
RM1-2366-000CN -CABLE, CASSETTE SIZE-
RM1-1644-000CN -CABLE, DEV. DISENGAGING SENSOR-
RM1-2370-000CN -CABLE, DOOR SWITCH-
RK2-0802-000CN -CABLE, FLAT-
RK2-0612-000CN CABLE, FLAT
RM1-2373-000CN -CABLE, INTERFACE-
RM1-2369-000CN -CABLE, MOTOR-
RM1-2372-000CN -CABLE, PAPER FEED SENSOR-
RM1-2368-000CN -CABLE, SOLENOID-
RM1-2371-000CN -CABLE, SOLENOID-
RC1-4352-000CN -CAP, RIGHT-
RM1-2143-000CN -CARTOUCHE, TONER GUIDE ASSY, RT. LW.-
RM1-2142-000CN -CARTOUCHE, TONER GUIDE ASSY, RT. UP.-
RM1-2219-000CN CASSETTE CASE UNIT
RM1-2227-000CN CASSETTE RAIL ASSY, LEFT
RM1-2228-000CN CASSETTE RAIL ASSY, RIGHT
CF038-67018 CLJ 4730 MFP 128MB Flash Module
CF038-67024 CLJ CM4730 MFP 128MB FMC
CF038-67021 CLJ CM4730 MFP128MB FlashMODULE 50.130.5
Q7517-67910 CLJ4730MFP CASSETTE ROLL KT
RK2-0816-000CN CONNECTOR FLAT CABLE 23P
RM1-1675-000CN CONNECTOR GUIDE ASSY
WC4-5242-000CN Cover Safety Switch
WC4-5188-000CN COVER SAFETY SWITCH
RC1-5644-000CN -COVER, BASE PLATE EDGE-
RC1-6067-000CN -COVER, CASTER, LEFT-
RC1-6068-000CN -COVER, CASTER, RIGHT-
RC1-5677-000CN -COVER, DOOR CABLE-
RL1-0827-000CN Cover, Front
RC1-5694-000CN COVER, FRONT
RC1-5658-000CN -COVER, INNER-
RC1-5877-000CN -COVER, INNER TOP, FRONT-
RC1-5878-000CN -COVER, INNER TOP, REAR-
RC1-5988-000CN COVER, INNER, FRONT
RC1-5873-000CN -COVER, INNER, REAR-
RC1-6043-000CN -COVER, LEFT LOWER-
RC1-4323-000CN -COVER, LEFT LOWER-
RM1-2179-000CN COVER, PAPER DELIVERY ASSEMBLY
RC1-5880-000CN -COVER, PAPER DELIVERY, UPPER-
RM1-2118-000CN COVER, REAR ASSEMBLY
RM1-2105-000CN COVER, RIGHT LOWER
RC1-6045-000CN -COVER, RIGHT LOWER-
RC1-4322-000CN -COVER, RIGHT LOWER-
RC1-5778-000CN -COVER, SHIELD-
RC1-5779-000CN -COVER, SHIELD-
RC1-5776-000CN -COVER, SHIELD-
RL1-0654-000CN -COVER, SOLENOID-
RM1-2200-000CN -CST. COVER ASSEMBLY, B-
RM1-2346-050CN DC CONTROLLER PCB ASSY
RM1-2346-080CN DC CONTROLLER PCB ASSY
RK2-0615-000CN DC MOTOR
RM1-1730-040CN DELIVERY ASSY
RM1-1730-030CN DELIVERY ASSY 110V
RM1-1730-000CN DELIVERY ASSY 110V
RM1-1737-030CN DELIVERY ASSY 220V
RM1-1737-000CN DELIVERY ASSY 220V
RM1-1737-050CN DELIVERY ASSY 220V
RM1-1757-000CN DELIVERY FAN
RK2-0621-000CN DELIVERY FAN
RC1-4874-000CN DELIVERY ROLLER 110V
RC1-4875-000CN DELIVERY ROLLER 220V
Q7723-67951 DIMM-512MB DDR 200PIN SDRAM BK
RM1-1717-000CN DISENGAGING DRIVE ASSY
RM1-2356-000CN DOOR CABLE ASSY
RM1-2349-000CN DRIVE SENSOR CABLE ASSY
RM1-2198-000CN DRIVE UNIT
RM1-1659-000CN DRUM MOTOR ASSY
J6073-69011 DUCATI EXCHG PRT
RC1-5867-000CN -DUCT, FAN-
RC1-5711-000CN -DUCT, FAN-
RM1-1785-000CN DUPLEX FEED ASSY ETB
RM1-2112-000CN Duplexer
RM1-2112-120CN DUPLEXING ASSY
RM1-3161-080CN Elect. Transport Belt Assy.
RM1-3161BULK Electronic transport bel
RM1-3161-130CN ELECTRONIC TRANSPORT BELT ASSY.
RM1-3161-000CN ETB ASSY
RM1-3161-070CN ETB ASSY
RM1-3161-07ACN ETB ASSY
RM1-3161-BULK ETB ASSY
RM1-2180-000CN FACE DOWN TRAY
RK2-0648-000CN FAN
RM1-2178-000CN FAN ASSY
RM1-2360-000CN FAN CONNECTING CABLE ASSY
RM1-2357-000CN FAN CONNECTING CABLE ASSY
RM1-2358-000CN FAN CONNECTING CABLE ASSY
IR4054P217NI Fan cover
RM1-2345-000CN FAN DRIVER PCB ASSY
RM1-1278-000CN FAN HOLDER
RM1-2120-000CN FAN HOLDER
RM1-2355-000CN FEED UNIT CONNECT CABLE ASSY
RM1-2102-000CN FIXING DOOR ASSY
RM1-2103-000CN -FIXING DOOR LINK ASSY, FRONT-
RM1-2104-000CN -FIXING DOOR LINK ASSY, REAR-
RM1-1634-000CN FIXING DRIVE CABLE ASSY
RC1-6012-000CN -FLAG, JAM SENSOR-
RK2-1171-000CN FLAT CABLE
IR4041P007NI FLTR-FAN
RM1-1642-000CN FORMATTER POWER CABLE ASSY
PF2288K001NI Front cover assembly
RM1-1729-000CN FUSER KIT (FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE) DRIVE ASSY
RM1-1631-000CN FUSER KIT (FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE) MOTOR CABLE ASSY
RM1-3131-060CN Fuser kit (Four, unité de fusion, kit de maintenance) unit (100V)
RM1-3131-BULK Fuser kit (Four, unité de fusion, kit de maintenance) unit (100V)
RM1-3146-070CN Fuser kit (Four, unité de fusion, kit de maintenance) unit (200V)
RM1-3146-BULK Fuser kit (Four, unité de fusion, kit de maintenance) unit (200V)
RM1-3146-060CN Fuser kit (Four, unité de fusion, kit de maintenance) unit (200V)
RM1-3131-000CN FUSER KIT (FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE) UNIT(100V)
RM1-3146-000CN FUSER KIT (FOUR, UNITÉ DE FUSION, KIT DE MAINTENANCE) UNIT(200V)
RC1-4324-000CN -GEAR, 18T-
RC1-4310-000CN -GEAR, 29T-
RC1-4309-000CN -GEAR, 30T-
PF2282P025NI GID-R-WHT
RC1-5904-000CN -GUIDE, CABLE-
RC1-5645-000CN -GUIDE, CABLE-
RC1-5766-000CN -GUIDE, CARTOUCHE, TONER, LEFT-
RC1-5759-000CN -GUIDE, COVER, LEFT-
RC1-5728-000CN -GUIDE, COVER, LEFT-
RC1-5864-000CN -GUIDE, FACE-DOWN, CENTER-
RC1-5865-000CN -GUIDE, FACE-DOWN, FRONT-
RC1-5866-000CN -GUIDE, FACE-DOWN, REAR-
RC1-5940-000CN -GUIDE, RETARD-
RC1-5648-000CN -GUIDE, SWITCHING ARM-
RC1-5649-000CN -GUIDE, SWITCHING ARM-
RM1-2144-000CN H.V. TERMINAL MOUNT ASSY
J6073-61241 HDD, EIO 40G ROHS
J6073-61031 HDD, EIO 40G ROHS
J6073-61041 HDD, EIO 40G ROHS
J6073-61141 HDD, EIO 40G ROHS
J6073-61071 HDD,EIO SMO KIT ROHS
J6073-61051 HDD,EIO SMO KIT ROHS
J6073-61061 HDD,EIO SMO KIT ROHS
RM1-1608-000CN HIGH-VOLTAGE POWER PCB ASSY
RC1-5772-020CN HOLDER, CABLE
RC1-5772-000CN HOLDER, CABLE
RC1-5773-000CN -HOLDER, CABLE-
RC1-5771-000CN -HOLDER, CABLE-
RC1-4314-000CN -HOLDER, FAN-
RC1-4316-000CN -HOLDER, FAN-
J6073-69021 HP High Performance EIO HDD
RM1-2100-000CN -INNER COVER ASSY, FRONT-
RM1-2101-000CN INNER COVER ASSY, REAR
PF2288P041NI Jam cover
PF2282K164NI Jam cover handle assembly
RM1-1008-000CN KICKER ASSY
CB480-67909 Kit - Replacement Shim
CB480-60124 Kit-Control Panel Overlay AR
CB480-60115 Kit-Control Panel Overlay CS
CB480-60112 Kit-Control Panel Overlay DA
CB480-60105 Kit-Control Panel Overlay DE
CB480-60123 Kit-Control Panel Overlay EL
CB480-60102 Kit-Control Panel Overlay EN
CB480-60106 Kit-Control Panel Overlay ES
CB480-60111 Kit-Control Panel Overlay FI
CB480-60103 Kit-Control Panel Overlay FR
CB480-60122 Kit-Control Panel Overlay HE
CB480-60129 Kit-Control Panel Overlay HR
CB480-60116 Kit-Control Panel Overlay HU
CB480-60104 Kit-Control Panel Overlay IT
CB480-60120 Kit-Control Panel Overlay JA
CB480-60119 Kit-Control Panel Overlay KO
CB480-60107 Kit-Control Panel Overlay NL
CB480-60109 Kit-Control Panel Overlay NO
CB480-60113 Kit-Control Panel Overlay PL
CB480-60108 Kit-Control Panel Overlay PT
CB480-60130 Kit-Control Panel Overlay RO
CB480-60114 Kit-Control Panel Overlay RU
CB480-60131 Kit-Control Panel Overlay SK
CB480-60132 Kit-Control Panel Overlay SL
CB480-60110 Kit-Control Panel Overlay SV
CB480-60125 Kit-Control Panel Overlay TH
CB480-60121 Kit-Control Panel Overlay TR
CB480-60136 Kit-Control Panel Overlay ZHCN
CB480-60118 Kit-Control Panel Overlay ZHCN
CB480-60135 Kit-Control Panel Overlay ZHTW
CB480-60117 Kit-Control Panel Overlay ZHTW
5851-3941 Kit-Roller
Q7491-67911 Kit-Spring Replacement
Q7491-67910 Kit-Spring Replacement
RM1-1591-000CN LASER/SCANNER ASSY
RM1-1591-030CN LASER/SCANNER ASSY
RM1-2115-000CN LEFT COVER
PF2288P058NI Left cover
IR4054P226NI Left cover
RC1-4846-000CN LEFT COVER ARM
RC1-4386-000CN LEFT ETB CAP
RM1-1663-000CN LEFT ETB LEVER ASSY
PF2288K041NI Left hinge assembly
RM1-1007-000CN LEFT REG. ADJUSTMENT ASSY
RM1-1664-000CN LEFT SCANNER RETAINING ASSY
RC1-5926-000CN LEVER LOCK
RC1-4387-000CN -LEVER, CRG. PRESSURE, LEFT-
RC1-6013-000CN -LEVER, SENSOR-
RM1-1750-030CN Lifter Drive Assy
RM1-1750-000CN LIFTER DRIVE ASSY
RC1-5650-000CN -LINK, SWITCHING ARM-
IR4041-SVPNR LJ4345MFP SCANNER ASSY
Q7517-69006 LJ4730MFP EXCH FORMATTER
Q7517-69004 LJ4730MFP FORMATTER
RC1-5020-000CN LOCK
RM1-2240-000CN LOWER PAPER PU ASSY
RM1-2238-000CN LOWER PICK-UP DRIVE ASSY
RK2-0627-000CN LOW-VOL PWER SUPL, 110V
RK2-0628-000CN -LOW-VOL PWER SUPL, 220V-
RM1-1627-000CN MAIN CABLE ASSY
RM1-2137-000CN MAIN DRIVE ASSY
RM1-1653-000CN MEMORY CONTACT CABLE
RM1-1618-000CN MEMORY PCB ASSY
RM1-2351-000CN MFP POWER CABLE ASSY
RK2-0804-000CN MICROSWITCH
CB480-60140 Mirror Control Panel
PF2282P353NI MLR-K-UP
RM1-2231-000CN MOTOR ASSY
RK2-0619-000CN -MOTOR, STEPPING, DC-
RK2-0618-000CN -MOTOR, STEPPING, DC-
RM1-2203-000CN MPU RAIL ASSY
PF2288K166NI Mud flap assembly
RM1-2109-020CN MULTI-PURPOSE TRAY ASSY
RM1-2199-000CN MULTI-PURPOSE UNIT
PF2288K050NI-5 Mylar Kit
PF2288K050NI Mylar Kit
PF2282K050NI MYLAR REPLACEMENT KIT
CB480-40059 Nameplate-CLJ CM4730 MFP
RM1-2354-000CN OPERATION PANEL CABLE ASSY
RM1-2117-000CN OPERATION PANEL HOLDER ASSY
RM1-2241-000CN PAPER DECK RIGHT LOWER ASSY
RC1-6047-000CN PAPER DECK, COVER FRONT LEFT
RC1-6046-000CN PAPER DECK, COVER FRONT LEFT
RC1-6042-000CN PAPER DECK, COVER LEFT
RC1-6048-000CN PAPER DECK, COVER REAR
RC1-6044-000CN PAPER DECK, COVER RIGHT
RM1-1756-000CN PAPER FEED ASSY
RM1-0037-020CN PAPER FEED ROLLER ASSY
RM1-2365-020CN PAPER FEEDER DRIVER PCB ASSY
RM1-2365-000CN PAPER FEEDER DRIVER PCB ASSY
RM1-2350-000CN PAPER SENSOR CABLE ASSY
RM1-2249-000CN PAPER SENSOR UNIT
PF2282P061NI Paper stop
IR4041K512NI PBA-SCB-ASY
CB480-69002 PCA-KIT FOR CLJ 4730/CM4730 MFP
PHA000151 Pharos PC Prox Plus Card Reader
WG8-5696-000CN Photo interrupter, TLP1243
RM1-2361-000CN PICKUP CABLE ASSY
RM1-2189-000CN PICK-UP MOTOR ASSY
RC1-5938-000CN -PIN, RETARD GUIDE-
RC1-5939-000CN -PIN, RETARD GUIDE-
RC1-5696-000CN PLATE FRONT COVER
RC1-5927-000CN PLATE LOCK
RC1-4397-000CN -PLATE, PRESSURE-
RC1-4360-000CN -PLATE, PRESSURE RIGHT-
RM1-2353-000CN POWER CABLE ASSY
RM1-2352-000CN POWER SAVE CABLE ASSY
RK2-0622-000CN POWER SUPPLY FAN
RM1-2099-000CN POWER SUPPLY SWITCH ASSY
PF2288P044NI Rear cover
IR4054P216NI Rear cover
RM1-2101-020CN REAR INNER COVER ASSY
RM1-1679-000CN REAR PLATE ASSY
Q5997-67901-5 Replacement- ADF Maintenance Ki
Q5997-67901 Replacement- ADF Maintenance Kit
Q6496-67901 Replacement- Mylar Kit
Q6460-67901 Replacement-Black Print Cart. 12K
Q7517-67905 Replacement-Cassette Pick-up Rollers
Q6461-67901 Replacement-Cyan Print Cart. 12K
Q7517-67907 Replacement-Hard Disk Inside Drive Assy
Q7517-67911 Replacement-Hard Disk Inside Drive Assy
Q7517-67915 Replacement-Hard Disk Inside Drive Assy
Q6463-67901 Replacement-Magenta Print Cart. 12K
Q7517-67904 Replacement-MP Pick-up Rollers
Q6462-67901 Replacement-Yellow Print Cart. 12K
RC1-4864-000CN RIGHT COVER ARM
IR4054K100NI Right cover assembly
RM1-1662-000CN RIGHT ETB LEVER ASSY
RM1-1665-000CN RIGHT SCANNER RETAINING ASSY
RM1-2226-000CN RIGHT SWITCH ASSY
RM1-2111-000CN RIGHT UPPER DOOR
RC1-5760-000CN -ROD, TEST PRINT-
RL1-0019-000CN Roller - MP Tray Pick-up
IR4054-SVPNR Scanner
IR4041K512NR SCANNER CONTROLLER BOARD
IR4054-SVPNI Scanner
IR4041P021NI SCR-BTN-M3X8
XA9-1504-000CN SCREW,RS,M3X8
WP2-5187-000CN -SENSOR UNIT, HUMIDITY-
RC1-5692-000CN -SHAFT, DOOR HINGE, FRONT-
RC1-5693-000CN -SHAFT, DOOR HINGE, REAR-
PF2282P339NI SHT-B-SPONG
RM1-0041-020CN SIZE SENSING ASSY
RK2-0624-000CN SOLENOID
PF2282P352NI SP-B-CVR-L
RC1-4396-000CN -SPRING, COMPRESSION-
RU5-2514-000CN -SPRING, COMPRESSION-
RC1-4803-000CN -SPRING, COMPRESSION-
RC1-4313-000CN SPRING, SCANNER SUPPORT
RC1-0198-000CN SPRING, TENSION
RC1-4395-000CN SPRING, TENSION
RC1-4393-000CN -SPRING, TENSION-
RC1-4423-000CN -SPRING, TENSION-
PF2282P343NI SP-R-WHT
RM1-2119-030CN SUB POWER SUPPLY ASSY
RM1-2119-000CN SUB POWER SUPPLY ASSY
RB2-8386-000CN Support Separation Pad
RC1-4312-000CN SUPPORT, SCANNER
RC1-4395-030CN Tension Spring
RM1-1609-000CN TONER SENSOR PCB ASSY
RC1-5953-000CN TORSION SPRING
RF5-3750-020CN TRAY 1 MP SEPARATION PAD
RM1-0041-000CN Tray 2, paper size sensing Assy
RK2-0623-000CN UPPER EXHAUST/CARTOUCHE, TONER FAN
PF2282K034NI Upper paper path assembly
RM1-2232-000CN UPPER PAPER PICKUP ASSY
RM1-2229-000CN UPPER PICK-UP DRIVE ASSY

Caractéristiques techniques

HP Color LaserJet CM4730, CM4730F, CM4730FSK

Vitesse noir 30 ppm
Vitesse couleur 30 ppm
Bac à papier 500 feuilles
Ref toner noir Q6460A
Capacité toner noir 12000 pages
Ref toner couleur Q6461A
Capacité toner couleur 12000 pages