Printer image

Votre imprimante laser LaserJet Enterprise 500 MFP M525, M525C, M525DN, M525F
est en panne ?

Notre technicien peut intervenir sur site
pour la dépanner.

Nos spécialistes sont en mesure de prendre en charge toutes les pannes :

Indiquez-nous la panne rencontrée pour obtenir un diagnostic.

  • Défauts d’impression (traces, points, traits...)
  • Bourrages papier (départ papier, feuille froissée en accordéon...)
  • Message ou code erreur
  • Fuite de toner
  • Bruit anormal
  • Panne électronique
  • Paramétrage
  • Accessoire
  • Pièce détachée
  • Machine complète

... ou le code erreur qui s'affiche sur l'écran de votre imprimante.

Codes erreur rencontrés fréquemment sur l'imprimante
LaserJet Enterprise 500 MFP M525, M525C, M525DN, M525F

Le code affiché sur votre imprimante est plus long que celui indiqué dans cette liste.
Par exemple si l'écran de l'imprimante indique un code 13.00.02, nous ne retenons que le début du code, c'est à dire 13.
Le code 13 renvoie à un type de problème, les chiffres qui suivent pouvant apporter une précision.

printer-icon

Code erreur 10 : Problème de mémoire consommable, puce HS


Code erreur 13 : Bourrage papier


Code erreur 41 : Format de papier inattendu


Code erreur 49 : Format de fichier incorrect (pdf ou autre) ou pb de firmware


Code erreur 50 ou Erreur Station fusion ou Remplacer kit de maintenance : Problème de four (kit de maintenance)


Code erreur 51 : Panne de moteur laser


Code erreur 57 : Panne de ventilateur


Code erreur 59 : Panne de moteur


Tableau de tous les codes erreur de la LaserJet Enterprise 500 MFP M525, M525C, M525DN, M525F

10.0X.Y0

- code :

10.0X.Y0

- affichage :

10.0X.Y0 Supply memory error

- description :

The product cannot read or write to at least one print cartridge memory tag or a memory tag is missing from a print cartridge. Memory error • 10.00.00 (event code) Black print cartridge E-label missing • 10.00.10 (event code) Black print cartridge.

10.23.50

- code :

10.23.50

- affichage :

10.23.50

- description :

The fuser kit life was reset above the order threshold. A new ITB was installed.

10.23.51

- code :

10.23.51

- affichage :

10.23.51

- description :

The fuser kit life was reset above the replace threshold. A new ITB was installed.

10.23.52

- code :

10.23.52

- affichage :

10.23.52

- description :

The fuser kit life was reset above the reset threshold. A new ITB was installed.

10.23.70

- code :

10.23.70

- affichage :

10.23.70 Printing Past Very Low

- description :

The product indicates when the fuser kit is very low. The actual remaining fuse kit life might vary. You do not need to replace the fuser kit at this time unless print quality is no longer acceptable.

10.XX.34

- code :

10.XX.34

- affichage :

10.XX.34 Used Supply In Use

- description :

The toner cartridge is used. • 10.00.34 (event code) Black print cartridge

10.XX.40

- code :

10.XX.40

- affichage :

10.XX.40 Unsupported Supply In Use

- description :

The indicated toner cartridge is for a different product. • 10.00.41 (event code) Black print cartridge

10.XX.70

- code :

10.XX.70

- affichage :

10.XX.70 Printing Past Very Low

- description :

The product indicates when a supply is very low. The actual remaining supply life might vary. You do not need to replace the supply at this time unless print quality is no longer acceptable. • 10.00.70 (event code) Black print cartridge • 10.23.70 (event code) The product indicates when the fuser kit is very low. The actual remaining fuser kit life might vary. You do not need to replace the fuser kit at this time unless print quality is no longer acceptable.

10.YY.15

- code :

10.YY.15

- affichage :

10.YY.15 Install Supply

- description :

The indicated supply has been removed or installed incorrectly. • 10.00.15 (event code) Black print cartridge • 10.23.15 Fuser kit

11.00.YY

- code :

11.00.YY

- affichage :

11.00.YY Internal clock error

- description :

The product real-time clock has experienced an error. • XX = 01: Clock battery failed • XX = 02: Real-time clock failed

13.A3.D3

- code :

13.A3.D3

- affichage :

13.A3.D3

- description :

paper input delay jam 2 (paper did not reach the tray 3 feed sensor in time.)

13.A3.D4

- code :

13.A3.D4

- affichage :

13.A3.D4

- description :

Paper input delay jam 2 (paper did not reach the tray 3 feed sensor in time.) Tray 4 feed sensor.

13.A3.FF

- code :

13.A3.FF

- affichage :

13.A3.FF or 13.A4.FF

- description :

Residual media in paper path jam 1. Tray 3 or Tray 4 feed sensor

13.A4.FF

- code :

13.A4.FF

- affichage :

13.A3.FF or 13.A4.FF

- description :

Residual media in paper path jam 1. Tray 3 or Tray 4 feed sensor

13.B2.D1

- code :

13.B2.D1

- affichage :

13.B2.D1

- description :

Tray 1 jam (no-pick). Paper input delay jam 1. The paper did not reach the registration or Top sensor in time.

13.B2.D2

- code :

13.B2.D2

- affichage :

13.B2.D2

- description :

Paper input delay jam 1 (paper did not reach the registration sensor in time; no pick) Tray 2; registration or Top sensor.

13.B2.DD

- code :

13.B2.DD

- affichage :

13.B2.DD

- description :

Paper input delay jam 1 (paper did not reach the registration sensor in time.) Duplexer; registration or Top sensor. Media did not reach the Top or registration sensor to print the second side of a duplex job.

13.B2.FF

- code :

13.B2.FF

- affichage :

13.D3.FF or 13.B2.FF

- description :

Residual Media in Paper path jam 1 or 2 (paper detected in the paper path.) When the product power is turned on, paper remains in the paper path, triggering the duplex sensor. • 13.D3.FF: Duplexer. • 13.B2.FF: Registration or Top sensor.

13.B2.XX

- code :

13.B2.XX

- affichage :

13.B2.XX

- description :

Media late to registration sensor. • 13.B2.D3: Paper input delay jam 1 (paper remained at the registration sensor longer than legalsized media would.) Tray 3; registration or Top sensor. • 13.B2.D4: Paper input stay jam 1 (paper remained at the registration sensor longer than legalsized media would.) Tray 4; registration or Top sensor

13.B9.AX

- code :

13.B9.AX

- affichage :

13.B9.AX

- description :

13.B9.A2, 13.B9.A3, 13.B9.A4, 13.B9.A5, or 13.B9.AB Fuser delivery stay jam 1 (paper stayed at fuser output sensor longer than it should; fuser output.) Fuser modes • A2.Normal fuser mode • A3.Light 1/2 fuser mode • A4.Heavy 1 fuser mode • A5.Heavy 2 fuser mode • AB-Overhead transparency fuser mode

13.B9.CX

- code :

13.B9.CX

- affichage :

13.B9.CX

- description :

13.B9.C2, 13.B9.C3, 13.B9.C4, 13.B9.C5, or 13.B9.CB Wrap jam 1 (paper first detected at fuser output sensor and then disappears from sensor before it should; fuser output . paper is wrapped around the fuser.) Fuser mode • C2.Normal fuser mode • C3.Light 1/2 fuser mode • C4.Heavy 1 fuser mode • C5.Heavy 2 fuser mode • CB-Overhead transparency fuser modes

13.B9.DX

- code :

13.B9.DX

- affichage :

13.B9.DX

- description :

13.B9.D1, 13.B9.D2, 13.B9.D3, 13.B9.D4, or 13.B9.DD Fuser delivery delay jam 1 (paper did not reach the fuser output sensor in time; fuser output.) • D1.Tray 1 • D2.Tray 2 • D3.Tray 3 • D4.Tray 4 • DD-Duplexer

13.B9.FF

- code :

13.B9.FF

- affichage :

13.B9.FF

- description :

Residual Media in Paper path jam 1 (paper detected in the paper path; fuser output.) When the product power is turned on, paper activates the fuser output sensor and it stays on.

13.BA.EE

- code :

13.BA.EE

- affichage :

13.BA.EE or 13.DA.EE

- description :

Door open jam 1 (Door opens during print job.) When the product power is turned on, paper remains in the paper path, triggering the duplex sensor. • 13.BA.EE: Toner door. • 13.DA.EE: Rear door

13.D3.DX

- code :

13.D3.DX

- affichage :

13.D3.DX

- description :

13.D3.D2, 13.D3.D3, 13.D3.D4, 13.D3.D5, or 13.D3.DB Duplex re-feed jam 1 (paper did not reach the duplex sensor in time; duplexer.) Fuser modes • D2.Normal fuser mode • D3.Light 1/2 fuser mode • D4.Heavy 1 fuser mode • D5.Heavy 2 fuser mode • DB-Overhead transparency fuser mode

13.D3.FF

- code :

13.D3.FF

- affichage :

13.D3.FF or 13.B2.FF

- description :

Residual Media in Paper path jam 1 or 2 (paper detected in the paper path.) When the product power is turned on, paper remains in the paper path, triggering the duplex sensor. • 13.D3.FF: Duplexer. • 13.B2.FF: Registration or Top sensor.

13.DA.EE

- code :

13.DA.EE

- affichage :

13.BA.EE or 13.DA.EE

- description :

Door open jam 1 (Door opens during print job.) When the product power is turned on, paper remains in the paper path, triggering the duplex sensor. • 13.BA.EE: Toner door. • 13.DA.EE: Rear door

13.E1.XX

- code :

13.E1.XX

- affichage :

13.E1.XX

- description :

13.E1.D2, 13.E1.D3, 13.E1.D4, 13.E1.D5, or 13.E1.DB Fuser delivery delay jam 2 (paper did not reach the output bin full sensor in time; output bin full.) Fuser modes • E2.Normal fuser mode • E3.Light 1/2 fuser mode • E4.Heavy 1 fuser mode • E5.Heavy 2 fuser mode • EB-Overhead transparency fuser mode

20.00.00

- code :

20.00.00

- affichage :

20.00.00 Insufficient memory: <Device>

- description :

The product has experienced a memory error. You might have tried to transfer too many fonts or macros

21.00.00

- code :

21.00.00

- affichage :

21.00.00 Page too complex

- description :

The page decompression process was too slow for the product.

30.01.23

- code :

30.01.23

- affichage :

30.01.23 Scanner calibration failure

- description :

The scanner calibration failed.

30.01.36

- code :

30.01.36

- affichage :

30.01.36 Upgrade Error Try downloading upgrade again

- description :

Scanner firmware upgrade error.

30.01.43

- code :

30.01.43

- affichage :

30.01.43 Scan memory failure

- description :

A scan memory error occurred.

30.01.YY

- code :

30.01.YY

- affichage :

30.01.YY Scanner failure

- description :

• 30.01.06 (event code): Scanner fan error • 30.01.41 (event code): Internal communication error involving the copy processor board (CPB) on the formatter • 30.01.42 (event code): Internal communication error

30.WX.YZ

- code :

30.WX.YZ

- affichage :

30.WX.YZ Scanner fan failureoccurred.

- description :

The product has detected a problem with the scanner. This error occurs when there is a CPB memory failure and the formatter needs to be replaced.

31.01.47

- code :

31.01.47

- affichage :

31.01.47 Document feeder not detected

- description :

The document feeder was not detected, and might not be ADF connected. The flatbed glass is still available for scanning.

31.03.22

- code :

31.03.22

- affichage :

31.03.22 Scanner calibration failure

- description :

The scanner calibration failed. This could affect scanning picture quality

31.13.03

- code :

31.13.03

- affichage :

31.13.03 Document feeder pick error

- description :

The document feeder cannot pick up paper.

31.WX.10

- code :

31.WX.10

- affichage :

31.WX.10 Scanner failure

- description :

The product has detected a scanner ADF fan error.

31.WX.15

- code :

31.WX.15

- affichage :

31.WX.15 Jam in document feeder

- description :

Originals are jammed inside the document feeder top cover.

33.WX.YZ

- code :

33.WX.YZ

- affichage :

33.WX.YZ Used board/disk installed

- description :

An encrypted board or disk with existing data previously locked to a different product has replaced the original. If you continue, data is permanently lost.

40.00.01

- code :

40.00.01

- affichage :

40.00.01 USB I/O buffer overflow

- description :

The USB buffer overflowed during a busy state.

41.02.00

- code :

41.02.00

- affichage :

41.02.00 Error

- description :

A beam detect misprint error has occurred.

41.03.YZ

- code :

41.03.YZ

- affichage :

41.03.YZ Unexpected size in Tray <X>

- description :

The product detected a different paper size than expected. Y = Size mismatch, Z = Source • Y = 0: Detected paper is longer or shorter than expected • Y = A: Detected paper too long • Y = B: Detected paper too short • Z = 1: Tray 1 • Z = 2: Tray 2 • Z = 3: Tray 3

49.XX.YY

- code :

49.XX.YY

- affichage :

49.XX.YY Error

- description :

A firmware error has occurred. This error can be caused by corrupted print jobs, software applications issues, non-product specific print drivers, poor-quality USB or network cables, bad network connections or incorrect configurations, invalid firmware operations, or unsupported accessories.

50.WX.YZ

- code :

50.WX.YZ

- affichage :

50.WX.YZ Fuser error

- description :

The product experienced a fuser error. • W = fuser error code • X = fuser mode • 0: Photo paper 1, 2, 3, Designated paper 2, 3, or NA, typed or AutoSense • 1: AutoSense (Normal special case distinguished from typed Normal) • 2: Normal, typed (not AutoSense) • 3: Light paper 1, 2, or 3, typed or AutoSense • 4: Heavy paper 1, typed or AutoSense • 5: Heavy paper 2, typed or AutoSense • 6: Heavy paper 3, typed or AutoSense • 7: Glossy paper 1, typed or AutoSense • 8: Glossy paper 2, typed or AutoSense • 9: Glossy paper 3, typed or AutoSense • A: Glossy film, typed or AutoSense • B: Transparency, typed or AutoSense • C: Label • D: Envelope1, Envelope2, or Envelope3 • E: Rough (designated paper 1), typed or AutoSense • F: Reserved for future fuser mode • Y = previous product sleep state • Z = next product sleep state • 0: Printing • 1: Standby level 1 (no temperature control) • 2: Standby level 2 (high temperature control) • 3: Standby level 3 (middle temperature control) • 4: Standby level 4 (low temperature control) • 5: Middle sleep • 6: Deep sleep • F: Off

51.00.YY

- code :

51.00.YY

- affichage :

51.00.YY Error

- description :

An error with the laser/scanner assembly has occurred in the product. • YY = 10: Beam detect error • YY = 19: Laser malfunction • YY = 20: Black laser scanner errort

52.XX.00

- code :

52.XX.00

- affichage :

52.XX.00

- description :

The laser/scanner experienced a startup error. • XX = 00: Laser/scanner motor startup error • XX = 20: Laser/scanner rotation error

54.XX.YY

- code :

54.XX.YY

- affichage :

54.XX.YY

- description :

A sensor error has occurred.

55.XX.YY

- code :

55.XX.YY

- affichage :

55.XX.YY DC Controller error

- description :

The communication link between the formatter and DC controller was lost. • 55.01.06 (event code): NVRAM memory data error warning • 55.02.06 (event code): NVRAM memory access error warning

56.00.YY

- code :

56.00.YY

- affichage :

56.00.YY Error

- description :

The product experienced a communication error with the optional paper tray. • 56.00.01 (event code): Illegal input, selected paper input tray is unavailable • 56.00.02 (event code): Illegal output, selected paper output bin is unavailable

57.00.0X

- code :

57.00.0X

- affichage :

57.00.0X Error

- description :

A fan error has occurred.

58.00.04

- code :

58.00.04

- affichage :

58.00.04 Error

- description :

The low-voltage power supply is defective.

59.00.00

- code :

59.00.00

- affichage :

59.00.00 Error

- description :

A paper path malfunction error has occurred.

59.00.20

- code :

59.00.20

- affichage :

59.00.20 Error

- description :

A motor rotation error has occurred.

62.00.00

- code :

62.00.00

- affichage :

62.00.00 No system

- description :

The product experienced an internal system failure.

69.X

- code :

69.X

- affichage :

69.X ERROR

- description :

The duplexer mechanism has failed.

70.00.00

- code :

70.00.00

- affichage :

70.00.00 Error

- description :

The product experienced a DC controller failure.

81.WX.00

- code :

81.WX.00

- affichage :

81.WX.00 Wireless Network Error

- description :

A wireless network component on the product has failed.

81.WX.YZ

- code :

81.WX.YZ

- affichage :

81.WX.YZ Embedded JetDirect Error

- description :

The product experienced an embedded HP Jetdirect print server critical error. • 81.01.00 (event code): EIO Networking Event <UVWXYZ> • 81.02.00 (event code): Wireless Networking Event <UVWXYZ> • 81.03.00 (event code): Access Point Wireless Networking Event <UVWXYZ> • 81.04.00 (event code): Jetdirect Inside Networking Event <UVWXYZ> • 81.06.00 (event code): Internal EIO Networking Event <UVWXYZ> • 81.07.00 (event code): Internal Wireless Networking Event <UVWXYZ> • 81.08.00 (event code): Internal Access Point Wireless Networking Event <UVWXYZ> • 81.09.00 (event code): Internal Jetdirect Inside Networking Event <UVWXYZ>

89.19.5C

- code :

89.19.5C

- affichage :

89.19.5C Error

- description :

This is a temporary firmware error that occurs every twenty-one days for the M500 and M600 products. This error does not indicate any problem with the product. NOTE: If the product power is turned off and then on again before twenty-one days elapse, this error will not occur.

98.00.01

- code :

98.00.01

- affichage :

98.00.01 or 98.01.00 Corrupt data in firmware volume

- description :

Data corruption has occurred in the firmware volume.

98.01.00

- code :

98.01.00

- affichage :

98.00.01 or 98.01.00 Corrupt data in firmware volume

- description :

Data corruption has occurred in the firmware volume.

99.XX.YY

- code :

99.XX.YY

- affichage :

99.XX.YY

- description :

A remote firmware upgrade (RFU) install error.

Le problème provient probablement d'une pièce à remplacer.

Pièces d'usures remplacées frequemment sur la LaserJet Enterprise 500 MFP M525, M525C, M525DN, M525F

Nomenclature des pièces détachées de la LaserJet Enterprise 500 MFP M525, M525C, M525DN, M525F

CE255-67901 A Print Cartridge
5851-0630 Asset Chimney
RM1-6306-000CN BASE PLATE ROLLER ASSY
CF104-69003 Blue Angel Formatter
5851-3499 Cable, Fax
RK2-4218-000CN CABLE, FLAT
RM1-8502-000CN CARTRIDGE DOOR ASSY
RM1-6279-010CN CASSETTE
RM1-8512-000CN CASSETTE ASSY
RM1-8512-010CN CASSETTE ASSY
RM1-8505-000CN CASSETTE PAPER PICK-UP ASSY
RM1-6279-000CN CASSETTE
CF116-60104 Cave Light
CF116-60105 Control Panel Cable
5042-8976 Control Panel HIP
CD644-67916 Control Panel Kit
5042-8977 Control Panel USB Cover
CC355-40013 Cover ADF Roller (boggie)
RC3-1863-000CN COVER, FORMATTER
RC2-7675-000CN COVER, HANDLE, RIGHT
RC2-7673-000CN COVER, RIGHT REAR
RM1-6323-000CN CST. PICK-UP ROLLER ASSY
RM1-6313-000CN CST. PICK-UP ROLLER SET ASSY
RM1-8615-000CN DC CONTROLLER PCB ASSY
CF116-67907 Encrypto HDD Kit
CF116-67915 Encrypto HDD Kit (Government Option)
RM1-8622-000CN ENVIRONMENT SENSOR PCB ASSY
RM1-6311-000CN FACE-DOWN ROLLER ASSY
RK2-2416-000CN Fan
RK2-1499-000CN FAN
5851-0672 Fax Black Plastic Cradle
CF116-67904 Fax Kit
CF116-67922 Flow ADF Whole Unit Kit
CF105-69001 Flow Formatter
CF116-67924 Flow Image Scanner Whole Unit Kit
CD644-67920 Flow Photon-R Control Panel
CF117-67901 Formatter Heat Sinc and Fan
Q7404-40030 Front cover
RM1-8508-000CN FUSER
RM1-8523-000CN FUSER MOTOR ASSY
RM1-8519-000CN H.V.POWER SUPPLY PCB ASSY
Q7404-40006 Hatch cover NEW 11-17-2011
5851-3453 HDD BRACKET
Q7404-60024 Hinge HR Assy
RM1-8506-000CN IDLER ROLLER ASSY
RM1-8499-000CN INTERLOCK SWITCH ASSY
CF116-67923 Kit Memory Board (Scanner Memory PCA)
5851-4879 Kit -Spring Separation Pad
5851-4878 Kit-Foam reflector (white ADF backing)
RM1-6322-000CN LASER SCANNER ASSY
RM1-8517-000CN LEFT COVER ASSY
Q7432-67001 LJ3392 Convenience Stapler Cassette -2Pk
RM2-8677-000CN LOW VOLTAGE POWER SUPPLY ASSY
RM1-8514-000CN LOW VOLTAGE POWER SUPPLY ASSY
RM1-6263-000CN LOWER PAPER FEED GUIDE ASSY
RM1-6325-000CN M.P.TRAY LIFTING PLATE ASSY.
CF116-60001 MEMORY BOARD
CF116-67919 MFP Stand
CF116-67917 MULTI-PURPOSE COVER ASSY
CF118-67901 MULTI-PURPOSE COVER ASSY Kit (workflow)
RM1-8621-000CN MULTI-PURPOSE SENSOR PCB ASSY
5851-4998 Mylar Kit A4
CF116-40011 Nameplate-LaserJet 500 MFP M525
CE530-69001 Opt 500sheet Feeder Asy CE530A
CE530-69002 Opt 500sheet Feeder Asy CE530A
RC2-8575-000CN PAD, MULTI-PURPOSE SEPARATION
RM1-6301-000CN PAPER DELIVERY ROLLER ASSY
RM1-6270-020CN PAPER FEED GUIDE ASSY
RM1-6270-000CN PAPER FEED GUIDE ASSY
RM1-8618-000CN PAPER WIDTH SENSOR PCB ASSY
RM1-6559-000CN Pendulum Service Kit
RM1-6598-000CN Pendulum Service Kit
8121-0811 PHN-CORD OPT-501 US 3.0-M-LG ROHS
8121-0844 PHN-CORD OPT-512 CH 3.0-M-LG ROHS
8120-8913 PHN-CORD OPT-517 IL 3.0-M-LG ROHS
WG8-5935-000CN PHOTO INTERRUPTER
RM1-6273-000CN POSITION GUIDE ASSY
8121-1143 Power Cord 110V - 12A Japan
8121-0739 PWR-CORD OPT-900 3-COND 1.9-M-L 10A ROHS
8121-0837 PWR-CORD OPT-901 3-COND 1.9-M-LG ROHS
8121-0731 PWR-CORD OPT-902 3-COND 1.9-M-LG ROHS
8121-0740 PWR-CORD OPT-903 3-COND 1.9-M-LG ROHS
8121-0738 PWR-CORD OPT-906 3-COND 1.9-M-LG ROHS
8121-0733 PWR-CORD OPT-912 3-COND 1.9-M-LG ROHS
8121-0737 PWR-CORD OPT-917 3-COND 1.9-M-LG ROHS
8121-1004 PWR-CORD OPT-919 3-COND 1.9-M-LG ROHS
8121-0729 PWR-CORD OPT-920 3-COND 1.9-M-LG ROHS
8121-0735 PWR-CORD OPT-921 3-COND 1.9-M-LG ROHS
8121-0943 PWR-CORD OPT-922 3-COND 1.9-M-LG
8121-0564 PWR-CORD OPT-923 3-COND 1.9-M-LG ROHS
8121-1071 PWR-CORD OPT-927 3-COND 1.9-M-LG
8121-0734 PWR-CORD OPT-927 3-COND 1.9-M-LG ROHS
8121-0964 PWR-CORD OPT-934 3-COND 1.9-M-LG ROHS
Q7404-40007 Rear cover
CF116-40002 Rear Cover (Rear Scanner Cover)
RM1-8518-000CN REAR COVER ASSY
RM1-8507-000CN REGISTRATION ROLLER ASSY
Q7432-67901 Replacement Staple Cartridge Pack
RM1-8498-000CN RIGHT COVER ASSY
RL1-2412-000CN ROLLER, MULTI-PURPOSE
RM1-6321-000CN ROLLER, TRANSFER
5851-5022 Selector Flow e-Duplex assembly kit
RM1-6303-000CN SEPARATION HOLDER ASSY
CF116-67903 Service PM Kit (110 and 220V)
RK2-1492-000CN SOLENOID
RK2-1490-000CN SOLENOID
L2725-60002 sRoller Replacement Kit 100 (ADF)
RM1-8520-000CN STAPLE COVER ASSY
5851-0786 STAPLER
CF116-60106 Stapler Cable
CC355-40046 STOPPER FRONT (Media Stopper - Front)
RC2-7928-000CN STOPPER, BUSHING ARM
Q7404-40020 STOPPER-PAPER (ADF Tray Extender)
CC355-40047 STOPPER-REAR (Media Stopper - Rear)
RM1-8515-000CN SWITCH ASSY
RM1-8521-000CN TAG HOLDER ASSY
RM1-8516-000CN TOP COVER ASSY
RM1-8617-000CN TOP SENSOR PCB ASSY
RM1-6315-000CN TRANSFER LOWER GUIDE ASSY
RM1-8620-000CN TRAY SENSOR PCB ASSY
5851-5380 Workflow Keyboard Assy Kit (Eng)Â
CD644-60113 Workflow Photon-R Control Panel -FFC
CE255-67902 X Print Cartridge;

Caractéristiques techniques

LaserJet Enterprise 500 MFP M525, M525C, M525DN, M525F

Vitesse noir 40 ppm
Bac à papier 500 feuilles
Ref toner noir CE255X
Capacité toner noir 12500 pages